Phd by thesis
TL;DR: In this paper, a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) is presented.
Abstract: Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These
Citations
More filters
01 Nov 1990
TL;DR: This report will establish methods for performing a domain analysis and describe the products of the domain analysis process to illustrate the application of domain analysis to a representative class of software systems.
Abstract: : Successful Software reuse requires the systematic discovery and exploitation of commonality across related software systems. By examining related software systems and the underlying theory of the class of systems they represent, domain analysis can provide a generic description of the requirements of that class of systems and a set of approaches for their implementation. This report will establish methods for performing a domain analysis and describe the products of the domain analysis process. To illustrate the application of domain analysis to a representative class of software systems, this report will provide a domain analysis of window management system software.
4,420 citations
TL;DR: The straw person model (SPM) as mentioned in this paper has been proposed to explain the orientation effects of active galactic nuclei (AGN) and quasars in the line of sight (LOS) images.
Abstract: Because the critical central regions of Active Galactic Nuclei (AGN) and quasars are strongly nonspherical but spatially unresolved, orientation effects have been the source of much confusion. In fact, it now appears that much of the variety in AGN types is just the result of varying orientation relative to the line of sight. We can define an extreme hypothesis,, the straw person model (SPM), in which there are two basic types of AGN: the radio quiets and the radio louds. For each type there is a range in intrinsic luminosity, and the luminosity controls some properties such as the Fanaroff and Riley classes. However, at a given intrinsic luminosity, all other properties such as spectroscopic classification and VLBI component speeds are ascribed to orientation. This model is only a caricature of the unification idea, and is already ruled out on many grounds, but it will be useful for organizing the discussion. I’ll describe what I consider to be convincing evidence that orientation effects are important and widespread. The true situation may be in some sense half way between the SPM and the hypothesis that orientation doesn’t affect classification at aIl. To us optimists, the orienration cup is half full rather than half empty. Although it is too soon to say for sure, the hypothesis that most objects’ classifications would be different if seen from other directions is a tenable one today.
4,005 citations
Cites methods from "Phd by thesis"
...Kay (1990) and Tran et al (1992) have fo und more Seyfert 2s with broad permitted lines in the polarized fl ux, but the FC polarizations are generally much less than that of NGC 1068....
[...]
TL;DR: This Review assembles the current knowledge on the isolation of microfibrillated cellulose from wood and its application in nanocomposites; the preparation of nanocrystalline cellulose and its use as a reinforcing agent; and the biofabrication of bacterial nanocellulose, as well as its evaluation as a biomaterial for medical implants.
Abstract: Cellulose fibrils with widths in the nanometer range are nature-based materials with unique and potentially useful features. Most importantly, these novel nanocelluloses open up the strongly expanding fields of sustainable materials and nanocomposites, as well as medical and life-science devices, to the natural polymer cellulose. The nanodimensions of the structural elements result in a high surface area and hence the powerful interaction of these celluloses with surrounding species, such as water, organic and polymeric compounds, nanoparticles, and living cells. This Review assembles the current knowledge on the isolation of microfibrillated cellulose from wood and its application in nanocomposites; the preparation of nanocrystalline cellulose and its use as a reinforcing agent; and the biofabrication of bacterial nanocellulose, as well as its evaluation as a biomaterial for medical implants.
3,452 citations
Cites background or methods from "Phd by thesis"
...b) Spheres formed by agitated cultivation with a shaking rate of 80–100 rpm; diameter: 2–3 mm, smooth surface.([181]) c) Tubes...
[...]
...a) Film prepared in a PP container under static conditions; dimensions: 25 25 cm(2), thickness: 200 mm.([181]) b) Spheres formed by agitated cultivation with a shaking rate of 80–100 rpm; diameter: 2–3 mm, smooth surface....
[...]
TL;DR: The Arcade Learning Environment (ALE) as discussed by the authors is a platform for evaluating the development of general, domain-independent AI technology, which provides an interface to hundreds of Atari 2600 game environments, each one different, interesting, and designed to be a challenge for human players.
Abstract: In this article we introduce the Arcade Learning Environment (ALE): both a challenge problem and a platform and methodology for evaluating the development of general, domain-independent AI technology. ALE provides an interface to hundreds of Atari 2600 game environments, each one different, interesting, and designed to be a challenge for human players. ALE presents significant research challenges for reinforcement learning, model learning, model-based planning, imitation learning, transfer learning, and intrinsic motivation. Most importantly, it provides a rigorous testbed for evaluating and comparing approaches to these problems. We illustrate the promise of ALE by developing and benchmarking domain-independent agents designed using well-established AI techniques for both reinforcement learning and planning. In doing so, we also propose an evaluation methodology made possible by ALE, reporting empirical results on over 55 different games. All of the software, including the benchmark agents, is publicly available.
2,429 citations
TL;DR: The solid electrolyte interphase (SEI) is a protecting layer formed on the negative electrode of Li-ion batteries as a result of electrolyte decomposition, mainly during the first cycle as discussed by the authors.
2,386 citations
References
More filters
TL;DR: The optimization and validation of a low-concentration Rh123 staining protocol for the flow-cytometric assessment of mitochondrial membrane potential (Delta Psi m) changes in whole yeast cells in response to a given drug is described.
Abstract: In yeast the use of rhodamine 123 (Rh123) has been restricted to the evaluation of mitochondrial respiratory function including the discrimination between respiratory-competent and -deficient cells. This study describes the optimization and validation of a low-concentration Rh123 staining protocol for the flow-cytometric assessment of mitochondrial membrane potential (Delta Psi m) changes in whole yeast cells. The optimized protocol was validated by the use of compounds that specifically affect mitochondrial energetics. Epifluorescence microscopy was used to monitor Rh123 distribution within the cell. Incubation of yeast cell suspensions with Rh123 (50 nM, 10 min) gave minimal non-specific binding and cytotoxicity of the dye. The ratio (R) between the green fluorescence and forward scatter (both measured as log values) was used to measure Delta Psi m with only little dependence on cell 'volume' and mitochondrial concentration. Cells treated with mitochondrial membrane de- or hyper-polarizing agents displayed a decrease and an increase of R values respectively, indicating that changes of the Rh123 distribution in cells indicate variations in the Delta Psi m. Live and dead cells also displayed significantly different R values. The method described here allows assessment of Delta Psi m changes in whole yeast cells in response to a given drug. Moreover, the relationship between drug effects and disorders of mitochondrial energetics might be addressed.
133 citations
TL;DR: In this paper, the role of the velocity function in the calculation of the lensing probability was investigated, and the results showed that the results are sensitive to these effects as well as theoretical models for the velocity functions, implying that current limits on the cosmological parameters should be interpreted with caution.
Abstract: Constraints on cosmological models from strong gravitational lensing statistics are in vestigated We pay particular attention to the role of the velocity function in the calculation of the lensing probability The velocity function derived from the observed galaxy luminos ity function, which is used in most previous work, is unable to predict the large separation lensing events In this paper, we also use the Press-Schechter theory to construct a velocity function theoretically Model predictions are compared with the observed velocity function and the HST snapshot survey Comparison with the latter observation shows that the pre dictions based on the theoretical velocity function are consistent with the observed large separation events in COBE normalized low-density models, especially with a non-vanishing cosmological constant Adopting the COBE normalization, however, we have not been able to find a model which simultaneously satisfies both the observed velocity function and the HST snapshot survey We systematically investigate various uncertainties in the gravita tionallensing statistics including finite core radius, the distance formula, magnification bias, and dust obscuration The results are very sensitive to these effects as well as theoretical models for the velocity function, implying that current limits on the cosmological parameters should be interpreted with caution Predictions for future surveys are also presented
132 citations
TL;DR: A novel Polar Scan Matching approach is described that works in the laser scanner's polar coordinate system, therefore taking advantage of the structure of the laser measurements and eliminating the need for an expensive search for corresponding points in other scan match approaches.
Abstract: In this paper a novel Polar Scan Matching (PSM) approach is described that works in the laser scanner's polar coordinate system, therefore taking advantage of the structure of the laser measurements and eliminating the need for an expensive search for corresponding points in other scan match approaches. PSM belongs to the family of point to point scan matching approaches with its matching bearing association rule. The performance of PSM is thoroughly evaluated in a simulated experiment, in experiments using ground truth, in experiments aimed at determining the area of convergence and in a SLAM experiment. All results are compared to results obtained using an iterated closest point (ICP) scan matching algorithm implementation. It is found that PSM is superior to the ICP implementation in processing speed and that PSM converges to a correct solution from a larger range of initial positions.
132 citations
TL;DR: Three Mg-formate frameworks, incorporating three different ammoniums, display structural phase transitions accompanied by prominent dielectric anomalies and anisotropic and negative thermal expansion, and the materials are all found to be thermally stable up to 470 K.
Abstract: We present three Mg-formate frameworks, incorporating three different ammoniums: [NH4][Mg(HCOO)3] (1), [CH3CH2NH3][Mg(HCOO)3] (2) and [NH3(CH2)4NH3][Mg2(HCOO)6] (3). They display structural phase transitions accompanied by prominent dielectric anomalies and anisotropic and negative thermal expansion. The temperature-dependent structures, covering the whole temperature region in which the phase transitions occur, reveal detailed structural changes, and structure-property relationships are established. Compound 1 is a chiral Mg-formate framework with the NH4(+) cations located in the channels. Above 255 K, the NH4(+) cation vibrates quickly between two positions of shallow energy minima. Below 255 K, the cations undergo two steps of freezing of their vibrations, caused by the different inner profiles of the channels, producing non-compensated antipolarization. These lead to significant negative thermal expansion and a relaxor-like dielectric response. In perovskite 2, the orthorhombic phase below 374 K possesses ordered CH3CH2NH3(+) cations in the cubic cavities of the Mg-formate framework. Above 374 K, the structure becomes trigonal, with trigonally disordered cations, and above 426 K, another phase transition occurs and the cation changes to a two-fold disordered state. The two transitions are accompanied by prominent dielectric anomalies and negative and positive thermal expansion, contributing to the large regulation of the framework coupled the order-disorder transition of CH3CH2NH3(+). For niccolite 3, the gradually enhanced flipping movement of the middle ethylene of [NH3(CH2)4NH3](2+) in the elongated framework cavity finally leads to the phase transition with a critical temperature of 412 K, and the trigonally disordered cations and relevant framework change, providing the basis for the very strong dielectric dispersion, high dielectric constant (comparable to inorganic oxides), and large negative thermal expansion. The spontaneous polarizations for the low-temperature polar phases are 1.15, 3.43 and 1.51 μC cm(-2) for 1, 2 and 3, respectively, as estimated by the shifts of the cations related to the anionic frameworks. Thermal and variable-temperature powder X-ray diffraction studies confirm the phase transitions, and the materials are all found to be thermally stable up to 470 K.
132 citations
TL;DR: In this article, a new method to enhance the photocatalytic activity of photo-induced super-hydrophilic nanoporous thin films direct coated on soda-lime glass was developed by treating the films in acidic solutions.
Abstract: Glasses for architecture must have many functions in addition to their transparency. For example, the glasses with the functions, of self-cleaning, light control, UV reduction, anti-bacterial, energy conversion, and so on, will be used in buildings in the near future. This paper reviews some results on multifunctional photoactive glasses based on multi-layer coatings containing TiO2 film and other functional coatings developed by us recently. The self-cleaning of glasses can be realized by coating the photoinduced super-hydrophilic nanoporous thin films based on TiO2 photocatalysts via sol–gel route. A new method to enhance the photocatalytic activity of TiO2 thin films direct coated on soda-lime glass was developed by treating the films in acidic solutions. The films also have good photoinduced anti-bacterial properties. The doping of a small amount of silver into the TiO2 porous film can enhance its anti-bacteria effect without UV light irradiation. The TiO2 thin films by appropriate heat-treatment can operate as self-cleaning glass in the visible light region. The UV reduction self-cleaning glasses are prepared by magnetron sputtering two layers of TiO2–CeO2 and TiO2 thin films on soda-lime glasses. The TiO2–CeO2 thin films can cut all of UV light through adjusting the ratio of TiO2 and CeO2. The TiO2/TiN/TiO2 type multi-layer coated on glass substrate can act as low-E self-cleaning glass. The potential water-repellent coating based on TiO2 is discussed finally.
132 citations