scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Photonic band-gap structures

01 Feb 1993-Journal of The Optical Society of America B-optical Physics (Springer, Boston, MA)-Vol. 10, Iss: 2, pp 283-295
TL;DR: In this article, the photonic band gap structures, those three-dimensional periodic dielectric structures that are to photon waves as semiconductor crystals are to electron waves, are discussed.
Abstract: The analogy between electromagnetic wave propagation in multidimensionally periodic structures and electron-wave propagation in real crystals has proven to be a fruitful one. Initial efforts were motivated by the prospect of a photonic band gap. a frequency band in three-dimensional dielectric structures in which electromagnetic waves are forbidden irrespective of the propagation direction in space. Today many new ideas and applications are being pursued in two and three dimensions and in metallic, dielectric, and acoustic structures. We review the early motivations for this research, which were derived from the need for a photonic band gap in quantum optics. This need led to a series of experimental and theoretical searches for the elusive photonic band-gap structures, those three-dimensionally periodic dielectric structures that are to photon waves as semiconductor crystals are to electron waves. We describe how the photonic semiconductor can be doped, producing tiny electromagnetic cavities. Finally, we summarize some of the anticipated implications of photonic band structure for quantum electronics and for other areas of physics and electrical engineering.

Content maybe subject to copyright    Report

Citations
More filters
Journal ArticleDOI
TL;DR: The fabrication of a new type of optical waveguide: the photonic crystal fiber that supports a single robust low-loss guided mode over a very broad spectral range of at least 458-1550 nm.
Abstract: We report the fabrication of a new type of optical waveguide: the photonic crystal fiber. It consists of a pure silica core surrounded by a silica-air photonic crystal material with a hexagonal symmetry. The fiber supports a single robust low-loss guided mode over a very broad spectral range of at least 458-1550 nm. Also see errata - http://eprints.soton.ac.uk/78010/

2,991 citations

Journal ArticleDOI
24 Jul 1998-Science
TL;DR: The examples presented demonstrate the compositional diversity possible with this technique and could have applications in areas ranging from quantum electronics to photocatalysis to battery materials.
Abstract: Titania, zirconia, and alumina samples with periodic three-dimensional arrays of macropores were synthesized from the corresponding metal alkoxides, using latex spheres as templates. In a fast, single-step reaction, the monomeric alkoxide precursors permeate the array of bulk polystyrene spheres and condense in air at room temperature. Close packed, open-pore structures with 320- to 360-nanometer voids are obtained after calcination of the organic component at 575 degreesC. The examples presented demonstrate the compositional diversity possible with this technique. The resulting highly structured ceramics could have applications in areas ranging from quantum electronics to photocatalysis to battery materials.

1,426 citations

Journal ArticleDOI
20 Nov 1998-Science
TL;DR: A fundamentally different type of optical waveguide structure is demonstrated, in which light is confined to the vicinity of a low-index region by a two-dimensional photonic band gap crystal.
Abstract: A fundamentally different type of optical waveguide structure is demonstrated, in which light is confined to the vicinity of a low-index region by a two-dimensional photonic band gap crystal. The waveguide consists of an extra air hole in an otherwise regular honeycomb pattern of holes running down the length of a fine silica glass fiber. Optical fibers based on this waveguide mechanism support guided modes with extraordinary properties.

1,290 citations

Journal ArticleDOI
TL;DR: In this article, a new defected ground unit structure (DGS) for the microstrip line is proposed, which can provide the bandgap characteristic in some frequency bands with only one or more unit lattices.
Abstract: A new defected ground structure (DGS) for the microstrip line is proposed in this paper. The proposed DGS unit structure can provide the bandgap characteristic in some frequency bands with only one or more unit lattices. The equivalent circuit for the proposed defected ground unit structure is derived by means of three-dimensional field analysis methods. The equivalent-circuit parameters are extracted by using a simple circuit analysis method. By employing the extracted parameters and circuit analysis theory, the bandgap effect for the provided defected ground unit structure can be explained. By using the derived and extracted equivalent circuit and parameters, the low-pass filters are designed and implemented. The experimental results show excellent agreement with theoretical results and the validity of the modeling method for the proposed defected ground unit structure.

1,269 citations

Journal ArticleDOI

1,239 citations

References
More filters
Journal ArticleDOI
TL;DR: If a three-dimensionally periodic dielectric structure has an electromagnetic band gap which overlaps the electronic band edge, then spontaneous emission can be rigorously forbidden.
Abstract: It has been recognized for some time that the spontaneous emission by atoms is not necessarily a fixed and immutable property of the coupling between matter and space, but that it can be controlled by modification of the properties of the radiation field. This is equally true in the solid state, where spontaneous emission plays a fundamental role in limiting the performance of semiconductor lasers, heterojunction bipolar transistors, and solar cells. If a three-dimensionally periodic dielectric structure has an electromagnetic band gap which overlaps the electronic band edge, then spontaneous emission can be rigorously forbidden.

12,787 citations

Journal ArticleDOI
Sajeev John1
TL;DR: A new mechanism for strong Anderson localization of photons in carefully prepared disordered dielectric superlattices with an everywhere real positive dielectrics constant is described.
Abstract: A new mechanism for strong Anderson localization of photons in carefully prepared disordered dielectric superlattices with an everywhere real positive dielectric constant is described. In three dimensions, two photon mobility edges separate high- and low-frequency extended states from an intermediate-frequency pseudogap of localized states arising from remnant geometric Bragg resonances. Experimentally observable consequences are discussed.

9,067 citations

Journal ArticleDOI
TL;DR: It is determined that dielectric spheres arranged in the diamond structure do possess a full photonic band gap, and this gap exists for refractive-index contrasts as low as 2.5%.
Abstract: Using a plane-wave expansion method, we have solved Maxwell's equations for the propagation of electromagnetic waves in a periodic lattice of dielectric spheres (dielectric constant ${\mathrm{\ensuremath{\epsilon}}}_{\mathit{a}}$) in a uniform dielectric background (${\mathrm{\ensuremath{\epsilon}}}_{\mathit{b}}$). Contrary to experiment, we find that fcc dielectric structures do not have a ``photonic band gap'' that extends throughout the Brillouin zone. However, we have determined that dielectric spheres arranged in the diamond structure do possess a full photonic band gap. This gap exists for refractive-index contrasts as low as 2.

2,115 citations

Journal ArticleDOI
TL;DR: A practical, new, face-centered-cubic dielectric structure which simultaneously solves two of the outstanding problems in photonic band structure and lends itself readily to microfabrication on the scale of optical wavelengths.
Abstract: We introduce a practical, new, face-centered-cubic dielectric structure which simultaneously solves two of the outstanding problems in photonic band structure. In this new ``photonic crystal'' the atoms are nonspherical, lifting the degeneracy at the W point of the Brillouin zone, and permitting a full photonic band gap rather than a pseudogap. Furthermore, this fully three-dimensional fcc structure lends itself readily to microfabrication on the scale of optical wavelengths. It is created by simply drilling three sets of holes 35.26\ifmmode^\circ\else\textdegree\fi{} off vertical into the top surface of a solid slab or wafer, as can be done, for example, by chemical-beam-assisted ion etching.

1,342 citations