Proceedings Article•
Photonic crystals
01 Jan 1999-
TL;DR: In this paper, the authors describe photonic crystals as the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures, and the interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.
Abstract: The term photonic crystals appears because of the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures. During the recent years the investigation of one-, two-and three-dimensional periodic structures has attracted a widespread attention of the world optics community because of great potentiality of such structures in advanced applied optical fields. The interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.
Citations
More filters
TL;DR: This research presents the next generation of single-beam optical traps, which promise to take optical tweezers out of the laboratory and into the mainstream of manufacturing and diagnostics and even become consumer products.
Abstract: Optical tweezers use the forces exerted by a strongly focused beam of light to trap and move objects ranging in size from tens of nanometres to tens of micrometres. Since their introduction in 1986, the optical tweezer has become an important tool for research in the fields of biology, physical chemistry and soft condensed matter physics. Recent advances promise to take optical tweezers out of the laboratory and into the mainstream of manufacturing and diagnostics; they may even become consumer products. The next generation of single-beam optical traps offers revolutionary new opportunities for fundamental and applied research.
4,647 citations
TL;DR: A laser cavity formed from a single defect in a two-dimensional photonic crystal is demonstrated and pulsed lasing action has been observed at a wavelength of 1.5 micrometers from optically pumped devices with a substrate temperature of 143 kelvin.
Abstract: A laser cavity formed from a single defect in a two-dimensional photonic crystal is demonstrated. The optical microcavity consists of a half wavelength–thick waveguide for vertical confinement and a two-dimensional photonic crystal mirror for lateral localization. A defect in the photonic crystal is introduced to trap photons inside a volume of 2.5 cubic half-wavelengths, approximately 0.03 cubic micrometers. The laser is fabricated in the indium gallium arsenic phosphide material system, and optical gain is provided by strained quantum wells designed for a peak emission wavelength of 1.55 micrometers at room temperature. Pulsed lasing action has been observed at a wavelength of 1.5 micrometers from optically pumped devices with a substrate temperature of 143 kelvin.
2,310 citations
TL;DR: A surface plasmon polariton (SPP) is an electromagnetic excitation existing on the surface of a good metal, whose electromagnetic field decays exponentially with distance from the surface.
2,211 citations
Cites background from "Photonic crystals"
...The optical properties of spatially periodic dielectric structures called photonic crystals have recently attracted much interest [157,158]....
[...]
TL;DR: An overview of current research activities that center on monodispersed colloidal spheres whose diameter falls anywhere in the range of 10 nm to 1 μm can be found in this paper.
Abstract: This article presents an overview of current research activities that center on monodispersed colloidal spheres whose diameter falls anywhere in the range of 10 nm to 1 μm. It is organized into three parts: The first part briefly discusses several useful methods that have been developed for producing monodispersed colloidal spheres with tightly controlled sizes and well-defined properties (both surface and bulk). The second part surveys some techniques that have been demonstrated for organizing these colloidal spheres into two- and three-dimensionally ordered lattices. The third part highlights a number of unique applications of these crystalline assemblies, such as their uses as photonic bandgap (PBG) crystals; as removable templates to fabricate macroporous materials with highly ordered and three-dimensionally interconnected porous structures; as physical masks in lithographic patterning; and as diffractive elements to fabricate new types of optical sensors. Finally, we conclude with some personal perspectives on the directions towards which future research in this area might be directed.
1,964 citations
Cites background from "Photonic crystals"
...The bandgap is usually characterized by three parameters: the position of the midgap (lmin), the width of the gap (Dl) or the gap/midgap ratio (Dl/lmin), and the maximum attenuation of the gap (10 log(Imax/Imin) in the unit of dB) [92]....
[...]
...A complete (or full, true) gap is defined as one that extends throughout the entire Brillouin zone in the photonic band structure.([92]) An incomplete one is often referred to as a pseudo gap (or the so-called stop bandgap), because it only shows up in the transmission spectrum along a certain propagation direction....
[...]
...A PBG crystal (or photonic crystal) is a spatially periodic structure fabricated from materials having different dielectric constants.([92]) It can influence the propagation of electromagnetic waves in a similar way as a semiconductor does for electronsÐthat is, there exists a bandgap that excludes the passage of photons of a chosen range of frequencies (Fig....
[...]
Journal Article•
TL;DR: In this article, a class of π;-conjugated compounds that exhibit large δ (as high as 1, 250 × 10−50 cm4 s per photon) and enhanced two-photon sensitivity relative to ultraviolet initiators were developed and used to demonstrate a scheme for three-dimensional data storage which permits fluorescent and refractive read-out, and the fabrication of 3D micro-optical and micromechanical structures, including photonic-bandgap-type structures.
Abstract: Two-photon excitation provides a means of activating chemical or physical processes with high spatial resolution in three dimensions and has made possible the development of three-dimensional fluorescence imaging, optical data storage, and lithographic microfabrication. These applications take advantage of the fact that the two-photon absorption probability depends quadratically on intensity, so under tight-focusing conditions, the absorption is confined at the focus to a volume of order λ3 (where λ is the laser wavelength). Any subsequent process, such as fluorescence or a photoinduced chemical reaction, is also localized in this small volume. Although three-dimensional data storage and microfabrication have been illustrated using two-photon-initiated polymerization of resins incorporating conventional ultraviolet-absorbing initiators, such photopolymer systems exhibit low photosensitivity as the initiators have small two-photon absorption cross-sections (δ). Consequently, this approach requires high laser power, and its widespread use remains impractical. Here we report on a class of π;-conjugated compounds that exhibit large δ (as high as 1, 250 × 10−50 cm4 s per photon) and enhanced two-photon sensitivity relative to ultraviolet initiators. Two-photon excitable resins based on these new initiators have been developed and used to demonstrate a scheme for three-dimensional data storage which permits fluorescent and refractive read-out, and the fabrication of three-dimensional micro-optical and micromechanical structures, including photonic-bandgap-type structures.
1,833 citations
References
More filters
TL;DR: This research presents the next generation of single-beam optical traps, which promise to take optical tweezers out of the laboratory and into the mainstream of manufacturing and diagnostics and even become consumer products.
Abstract: Optical tweezers use the forces exerted by a strongly focused beam of light to trap and move objects ranging in size from tens of nanometres to tens of micrometres. Since their introduction in 1986, the optical tweezer has become an important tool for research in the fields of biology, physical chemistry and soft condensed matter physics. Recent advances promise to take optical tweezers out of the laboratory and into the mainstream of manufacturing and diagnostics; they may even become consumer products. The next generation of single-beam optical traps offers revolutionary new opportunities for fundamental and applied research.
4,647 citations
TL;DR: A laser cavity formed from a single defect in a two-dimensional photonic crystal is demonstrated and pulsed lasing action has been observed at a wavelength of 1.5 micrometers from optically pumped devices with a substrate temperature of 143 kelvin.
Abstract: A laser cavity formed from a single defect in a two-dimensional photonic crystal is demonstrated. The optical microcavity consists of a half wavelength–thick waveguide for vertical confinement and a two-dimensional photonic crystal mirror for lateral localization. A defect in the photonic crystal is introduced to trap photons inside a volume of 2.5 cubic half-wavelengths, approximately 0.03 cubic micrometers. The laser is fabricated in the indium gallium arsenic phosphide material system, and optical gain is provided by strained quantum wells designed for a peak emission wavelength of 1.55 micrometers at room temperature. Pulsed lasing action has been observed at a wavelength of 1.5 micrometers from optically pumped devices with a substrate temperature of 143 kelvin.
2,310 citations
TL;DR: A surface plasmon polariton (SPP) is an electromagnetic excitation existing on the surface of a good metal, whose electromagnetic field decays exponentially with distance from the surface.
2,211 citations
TL;DR: An overview of current research activities that center on monodispersed colloidal spheres whose diameter falls anywhere in the range of 10 nm to 1 μm can be found in this paper.
Abstract: This article presents an overview of current research activities that center on monodispersed colloidal spheres whose diameter falls anywhere in the range of 10 nm to 1 μm. It is organized into three parts: The first part briefly discusses several useful methods that have been developed for producing monodispersed colloidal spheres with tightly controlled sizes and well-defined properties (both surface and bulk). The second part surveys some techniques that have been demonstrated for organizing these colloidal spheres into two- and three-dimensionally ordered lattices. The third part highlights a number of unique applications of these crystalline assemblies, such as their uses as photonic bandgap (PBG) crystals; as removable templates to fabricate macroporous materials with highly ordered and three-dimensionally interconnected porous structures; as physical masks in lithographic patterning; and as diffractive elements to fabricate new types of optical sensors. Finally, we conclude with some personal perspectives on the directions towards which future research in this area might be directed.
1,964 citations
Journal Article•
TL;DR: In this article, a class of π;-conjugated compounds that exhibit large δ (as high as 1, 250 × 10−50 cm4 s per photon) and enhanced two-photon sensitivity relative to ultraviolet initiators were developed and used to demonstrate a scheme for three-dimensional data storage which permits fluorescent and refractive read-out, and the fabrication of 3D micro-optical and micromechanical structures, including photonic-bandgap-type structures.
Abstract: Two-photon excitation provides a means of activating chemical or physical processes with high spatial resolution in three dimensions and has made possible the development of three-dimensional fluorescence imaging, optical data storage, and lithographic microfabrication. These applications take advantage of the fact that the two-photon absorption probability depends quadratically on intensity, so under tight-focusing conditions, the absorption is confined at the focus to a volume of order λ3 (where λ is the laser wavelength). Any subsequent process, such as fluorescence or a photoinduced chemical reaction, is also localized in this small volume. Although three-dimensional data storage and microfabrication have been illustrated using two-photon-initiated polymerization of resins incorporating conventional ultraviolet-absorbing initiators, such photopolymer systems exhibit low photosensitivity as the initiators have small two-photon absorption cross-sections (δ). Consequently, this approach requires high laser power, and its widespread use remains impractical. Here we report on a class of π;-conjugated compounds that exhibit large δ (as high as 1, 250 × 10−50 cm4 s per photon) and enhanced two-photon sensitivity relative to ultraviolet initiators. Two-photon excitable resins based on these new initiators have been developed and used to demonstrate a scheme for three-dimensional data storage which permits fluorescent and refractive read-out, and the fabrication of three-dimensional micro-optical and micromechanical structures, including photonic-bandgap-type structures.
1,833 citations