Journal Article•
PHYLIP-Phylogeny inference package (Version 3.2)
About: This article is published in Cladistics.The article was published on 1989-01-01 and is currently open access. It has received 16851 citations till now. The article focuses on the topics: Inference.
Citations
More filters
University of Michigan1, University of Massachusetts Amherst2, University of New Mexico3, University of British Columbia4, Texas A&M University5, University of Minnesota6, University of Warwick7, Dalhousie University8, Colorado School of Mines9, University of Ljubljana10, Graz University of Technology11, Louisiana State University12
TL;DR: M mothur is used as a case study to trim, screen, and align sequences; calculate distances; assign sequences to operational taxonomic units; and describe the α and β diversity of eight marine samples previously characterized by pyrosequencing of 16S rRNA gene fragments.
Abstract: mothur aims to be a comprehensive software package that allows users to use a single piece of software to analyze community sequence data. It builds upon previous tools to provide a flexible and powerful software package for analyzing sequencing data. As a case study, we used mothur to trim, screen, and align sequences; calculate distances; assign sequences to operational taxonomic units; and describe the alpha and beta diversity of eight marine samples previously characterized by pyrosequencing of 16S rRNA gene fragments. This analysis of more than 222,000 sequences was completed in less than 2 h with a laptop computer.
17,350 citations
TL;DR: This work has used extensive and realistic computer simulations to show that the topological accuracy of this new method is at least as high as that of the existing maximum-likelihood programs and much higher than the performance of distance-based and parsimony approaches.
Abstract: The increase in the number of large data sets and the complexity of current probabilistic sequence evolution models necessitates fast and reliable phylogeny reconstruction methods. We describe a new approach, based on the maximum- likelihood principle, which clearly satisfies these requirements. The core of this method is a simple hill-climbing algorithm that adjusts tree topology and branch lengths simultaneously. This algorithm starts from an initial tree built by a fast distance-based method and modifies this tree to improve its likelihood at each iteration. Due to this simultaneous adjustment of the topology and branch lengths, only a few iterations are sufficient to reach an optimum. We used extensive and realistic computer simulations to show that the topological accuracy of this new method is at least as high as that of the existing maximum-likelihood programs and much higher than the performance of distance-based and parsimony approaches. The reduction of computing time is dramatic in comparison with other maximum-likelihood packages, while the likelihood maximization ability tends to be higher. For example, only 12 min were required on a standard personal computer to analyze a data set consisting of 500 rbcL sequences with 1,428 base pairs from plant plastids, thus reaching a speed of the same order as some popular distance-based and parsimony algorithms. This new method is implemented in the PHYML program, which is freely available on our web page: http://www.lirmm.fr/w3ifa/MAAS/. (Algorithm; computer simulations; maximum likelihood; phylogeny; rbcL; RDPII project.) The size of homologous sequence data sets has in- creased dramatically in recent years, and many of these data sets now involve several hundreds of taxa. More- over, current probabilistic sequence evolution models (Swofford et al., 1996 ; Page and Holmes, 1998 ), notably those including rate variation among sites (Uzzell and Corbin, 1971 ; Jin and Nei, 1990 ; Yang, 1996 ), require an increasing number of calculations. Therefore, the speed of phylogeny reconstruction methods is becoming a sig- nificant requirement and good compromises between speed and accuracy must be found. The maximum likelihood (ML) approach is especially accurate for building molecular phylogenies. Felsenstein (1981) brought this framework to nucleotide-based phy- logenetic inference, and it was later also applied to amino acid sequences (Kishino et al., 1990). Several vari- ants were proposed, most notably the Bayesian meth- ods (Rannala and Yang 1996; and see below), and the discrete Fourier analysis of Hendy et al. (1994), for ex- ample. Numerous computer studies (Huelsenbeck and Hillis, 1993; Kuhner and Felsenstein, 1994; Huelsenbeck, 1995; Rosenberg and Kumar, 2001; Ranwez and Gascuel, 2002) have shown that ML programs can recover the cor- rect tree from simulated data sets more frequently than other methods can. Another important advantage of the ML approach is the ability to compare different trees and evolutionary models within a statistical framework (see Whelan et al., 2001, for a review). However, like all optimality criterion-based phylogenetic reconstruction approaches, ML is hampered by computational difficul- ties, making it impossible to obtain the optimal tree with certainty from even moderate data sets (Swofford et al., 1996). Therefore, all practical methods rely on heuristics that obtain near-optimal trees in reasonable computing time. Moreover, the computation problem is especially difficult with ML, because the tree likelihood not only depends on the tree topology but also on numerical pa- rameters, including branch lengths. Even computing the optimal values of these parameters on a single tree is not an easy task, particularly because of possible local optima (Chor et al., 2000). The usual heuristic method, implemented in the pop- ular PHYLIP (Felsenstein, 1993 ) and PAUP ∗ (Swofford, 1999 ) packages, is based on hill climbing. It combines stepwise insertion of taxa in a growing tree and topolog- ical rearrangement. For each possible insertion position and rearrangement, the branch lengths of the resulting tree are optimized and the tree likelihood is computed. When the rearrangement improves the current tree or when the position insertion is the best among all pos- sible positions, the corresponding tree becomes the new current tree. Simple rearrangements are used during tree growing, namely "nearest neighbor interchanges" (see below), while more intense rearrangements can be used once all taxa have been inserted. The procedure stops when no rearrangement improves the current best tree. Despite significant decreases in computing times, no- tably in fastDNAml (Olsen et al., 1994 ), this heuristic becomes impracticable with several hundreds of taxa. This is mainly due to the two-level strategy, which sepa- rates branch lengths and tree topology optimization. In- deed, most calculations are done to optimize the branch lengths and evaluate the likelihood of trees that are finally rejected. New methods have thus been proposed. Strimmer and von Haeseler (1996) and others have assembled four- taxon (quartet) trees inferred by ML, in order to recon- struct a complete tree. However, the results of this ap- proach have not been very satisfactory to date (Ranwez and Gascuel, 2001 ). Ota and Li (2000, 2001) described
16,261 citations
TL;DR: A 16S rRNA gene database (http://greengenes.lbl.gov) was used to provide chimera screening, standard alignment, and taxonomic classification using multiple published taxonomies as mentioned in this paper.
Abstract: A 16S rRNA gene database (http://greengenes.lbl.gov) addresses limitations of public repositories by providing chimera screening, standard alignment, and taxonomic classification using multiple published taxonomies. It was found that there is incongruent taxonomic nomenclature among curators even at the phylum level. Putative chimeras were identified in 3% of environmental sequences and in 0.2% of records derived from isolates. Environmental sequences were classified into 100 phylum-level lineages in the Archaea and Bacteria.
9,593 citations
TL;DR: This work overhauled its tool for finding preferential conservation of sequence motifs and applied it to the analysis of human 3'UTRs, increasing by nearly threefold the detected number of preferentially conserved miRNA target sites.
Abstract: MicroRNAs (miRNAs) are small endogenous RNAs that pair to sites in mRNAs to direct post-transcriptional repression. Many sites that match the miRNA seed (nucleotides 2–7), particularly those in 3 untranslated regions (3UTRs), are preferentially conserved. Here, we overhauled our tool for finding preferential conservation of sequence motifs and applied it to the analysis of human 3UTRs, increasing by nearly threefold the detected number of preferentially conserved miRNA target sites. The new tool more efficiently incorporates new genomes and more completely controls for background conservation by accounting for mutational biases, dinucleotide conservation rates, and the conservation rates of individual UTRs. The improved background model enabled preferential conservation of a new site type, the “offset 6mer,” to be detected. In total, >45,000 miRNA target sites within human 3UTRs are conserved above background levels, and >60% of human protein-coding genes have been under selective pressure to maintain pairing to miRNAs. Mammalian-specific miRNAs have far fewer conserved targets than do the more broadly conserved miRNAs, even when considering only more recently emerged targets. Although pairing to the 3 end of miRNAs can compensate for seed mismatches, this class of sites constitutes less than 2% of all preferentially conserved sites detected. The new tool enables statistically powerful analysis of individual miRNA target sites, with the probability of preferentially conserved targeting (PCT) correlating with experimental measurements of repression. Our expanded set of target predictions (including conserved 3-compensatory sites), are available at the TargetScan website, which displays the PCT for each site and each predicted target.
7,744 citations
TL;DR: The ARB program package comprises a variety of directly interacting software tools for sequence database maintenance and analysis which are controlled by a common graphical user interface.
Abstract: The ARB (from Latin arbor, tree) project was initiated almost 10 years ago. The ARB program package comprises a variety of directly interacting software tools for sequence database maintenance and analysis which are controlled by a common graphical user interface. Although it was initially designed for ribosomal RNA data, it can be used for any nucleic and amino acid sequence data as well. A central database contains processed (aligned) primary structure data. Any additional descriptive data can be stored in database fields assigned to the individual sequences or linked via local or worldwide networks. A phylogenetic tree visualized in the main window can be used for data access and visualization. The package comprises additional tools for data import and export, sequence alignment, primary and secondary structure editing, profile and filter calculation, phylogenetic analyses, specific hybridization probe design and evaluation and other components for data analysis. Currently, the package is used by numerous working groups worldwide.
6,757 citations