Polarization state generation and measurement with a single metasurface.
TL;DR: This work shows that a metasurface grating can be designed to produce arbitrarily specified polarization states on a set of defined diffraction orders given that the polarization of the incident beam is known.
Abstract: The constituent elements of metasurfaces may be designed with explicit polarization dependence, making metasurfaces a fascinating platform for new polarization optics. In this work we show that a metasurface grating can be designed to produce arbitrarily specified polarization states on a set of defined diffraction orders given that the polarization of the incident beam is known. We also demonstrate that, when used in a reverse configuration, the same grating may be used as a parallel snapshot polarimeter, requiring a minimum of bulk polarization optics. We demonstrate its use in measuring partially polarized light, and show that it performs favorably in comparison to a commercial polarimeter. This work is of consequence in any application requiring lightweight, compact, and low-cost polarization optics, polarimetry, or polarization imaging.
Citations
More filters
TL;DR: A formalism—matrix Fourier optics—for treating polarization in paraxial diffractive optics is introduced, a powerful generalization of a large body of past work on optical elements in which polarization may vary spatially.
Abstract: Recent developments have enabled the practical realization of optical elements in which the polarization of light may vary spatially. We present an extension of Fourier optics-matrix Fourier optics-for understanding these devices and apply it to the design and realization of metasurface gratings implementing arbitrary, parallel polarization analysis. We show how these gratings enable a compact, full-Stokes polarization camera without standard polarization optics. Our single-shot polarization camera requires no moving parts, specially patterned pixels, or conventional polarization optics and may enable the widespread adoption of polarization imaging in machine vision, remote sensing, and other areas.
410 citations
Cites background from "Polarization state generation and m..."
...In other past work, polarization is understood to vary with space, but a particular incident polarization state is assumed (22, 23)....
[...]
TL;DR: A polarization-insensitive metalens is demonstrated using otherwise anisotropic nanofins which offer additional control over the dispersion and phase of the output light, allowing achromatic and polarization- insensitive behaviour across the entire visible spectrum.
Abstract: Metasurfaces have attracted widespread attention due to an increasing demand of compact and wearable optical devices. For many applications, polarization-insensitive metasurfaces are highly desirable, and appear to limit the choice of their constituent elements to isotropic nanostructures. This greatly restricts the number of geometric parameters available in design. Here, we demonstrate a polarization-insensitive metalens using otherwise anisotropic nanofins which offer additional control over the dispersion and phase of the output light. As a result, we can render a metalens achromatic and polarization-insensitive across nearly the entire visible spectrum from wavelength λ = 460 nm to 700 nm, while maintaining diffraction-limited performance. The metalens is comprised of just a single layer of TiO2 nanofins and has a numerical aperture of 0.2 with a diameter of 26.4 µm. The generality of our polarization-insensitive design allows it to be implemented in a plethora of other metasurface devices with applications ranging from imaging to virtual/augmented reality. Polarization-insensitive metasurfaces implies limiting the choice of constituent elements to isotropic nanostructures. Here, the authors demonstrate a polarization-insensitive metalens using anisotropic nanofins, allowing achromatic and polarization-insensitive behaviour across the entire visible.
299 citations
TL;DR: This work reports an all-dielectric active metasurface based on electro-optically tunable III–V multiple-quantum-wells patterned into subwavelength elements that each supports a hybrid Mie-guided mode resonance, and demonstrates beam steering by applying an electrical bias to each element to actively change the metAsurface period.
Abstract: Tunable metasurfaces enable dynamical control of the key constitutive properties of light at a subwavelength scale. To date, electrically tunable metasurfaces at near-infrared wavelengths have been realized using free carrier modulation, and switching of thermo-optical, liquid crystal and phase change media. However, the highest performance and lowest loss discrete optoelectronic modulators exploit the electro-optic effect in multiple-quantum-well heterostructures. Here, we report an all-dielectric active metasurface based on electro-optically tunable III-V multiple-quantum-wells patterned into subwavelength elements that each supports a hybrid Mie-guided mode resonance. The quantum-confined Stark effect actively modulates this volumetric hybrid resonance, and we observe a relative reflectance modulation of 270% and a phase shift from 0° to ~70°. Additionally, we demonstrate beam steering by applying an electrical bias to each element to actively change the metasurface period, an approach that can also realize tunable metalenses, active polarizers, and flat spatial light modulators.
173 citations
TL;DR: In this article, a new class of polarizers and wave plates based on metasurfaces is demonstrated, which can impart an arbitrarily chosen polarization response along the propagation direction, regardless of the incident polarization.
Abstract: Polarization plays a key role in science; hence its versatile manipulation is crucial. Existing polarization optics, however, can only manipulate polarization in a single transverse plane. Here we demonstrate a new class of polarizers and wave plates—based on metasurfaces—that can impart an arbitrarily chosen polarization response along the propagation direction, regardless of the incident polarization. The underlying mechanism relies on transforming an incident waveform into an ensemble of pencil-like beams with different polarization states that beat along the optical axis thereby changing the resulting polarization at will, locally, as light propagates. Remarkably, using form-birefringent metasurfaces in combination with matrix-based holography enables the desired propagation-dependent polarization response to be enacted without a priori knowledge of the incident polarization—a behaviour that would require three polarization-sensitive holograms if implemented otherwise. Our work expands the use of polarization in the design of multifunctional metasurfaces and may find application in tunable structured light, optically switchable devices and versatile light–matter interactions. Using a metasurface that allows shaping of the polarization state of a light beam independently at each point of space along its propagation direction, longitudinally variable polarization optical components are demonstrated, inspiring new directions in structured light, polarization-switchable devices and light–matter interaction.
160 citations
TL;DR: A centimeter-scale, all-glass metalens capable of focusing and imaging at visible wavelength is demonstrated, using deep-ultraviolet projection stepper lithography and the imaging capabilities are explored using a color-pixel sCMOS camera and scanning-imaging techniques, demonstrating potential applications for virtual reality (VR) devices or biological imaging techniques.
Abstract: Metalenses, planar lenses realized by placing subwavelength nanostructures that locally impart lenslike phase shifts to the incident light, are promising as a replacement for refractive optics for their ultrathin, lightweight, and tailorable characteristics, especially for applications where payload is of significant importance. However, the requirement of fabricating up to billions of subwavelength structures for centimeter-scale metalenses can constrain size-scalability and mass-production for large lenses. In this Letter, we demonstrate a centimeter-scale, all-glass metalens capable of focusing and imaging at visible wavelength, using deep-ultraviolet (DUV) projection stepper lithography. Here, we show size-scalability and potential for mass-production by fabricating 45 metalenses of 1 cm diameter on a 4 in. fused-silica wafer. The lenses show diffraction-limited focusing behavior for any homogeneously polarized incidence at visible wavelengths. The metalens' performance is quantified by the Strehl ratio and the modulation transfer function (MTF), which are then compared with commercial refractive spherical and aspherical singlet lenses of similar size and focal length. We further explore the imaging capabilities of our metalens using a color-pixel sCMOS camera and scanning-imaging techniques, demonstrating potential applications for virtual reality (VR) devices or biological imaging techniques.
149 citations
References
More filters
TL;DR: In this article, a two-dimensional array of optical resonators with spatially varying phase response and subwavelength separation can imprint phase discontinuities on propagating light as it traverses the interface between two media.
Abstract: Conventional optical components rely on gradual phase shifts accumulated during light propagation to shape light beams. New degrees of freedom are attained by introducing abrupt phase changes over the scale of the wavelength. A two-dimensional array of optical resonators with spatially varying phase response and subwavelength separation can imprint such phase discontinuities on propagating light as it traverses the interface between two media. Anomalous reflection and refraction phenomena are observed in this regime in optically thin arrays of metallic antennas on silicon with a linear phase variation along the interface, which are in excellent agreement with generalized laws derived from Fermat’s principle. Phase discontinuities provide great flexibility in the design of light beams, as illustrated by the generation of optical vortices through use of planar designer metallic interfaces.
6,763 citations
TL;DR: A metasurface platform based on high-contrast dielectric elliptical nanoposts that provides complete control of polarization and phase with subwavelength spatial resolution and an experimentally measured efficiency ranging from 72% to 97%, depending on the exact design.
Abstract: Metasurfaces are planar structures that locally modify the polarization, phase and amplitude of light in reflection or transmission, thus enabling lithographically patterned flat optical components with functionalities controlled by design. Transmissive metasurfaces are especially important, as most optical systems used in practice operate in transmission. Several types of transmissive metasurface have been realized, but with either low transmission efficiencies or limited control over polarization and phase. Here, we show a metasurface platform based on high-contrast dielectric elliptical nanoposts that provides complete control of polarization and phase with subwavelength spatial resolution and an experimentally measured efficiency ranging from 72% to 97%, depending on the exact design. Such complete control enables the realization of most free-space transmissive optical elements such as lenses, phase plates, wave plates, polarizers, beamsplitters, as well as polarization-switchable phase holograms and arbitrary vector beam generators using the same metamaterial platform.
2,126 citations
TL;DR: The foundations of passive imaging polarimetry, the phenomenological reasons for designing a polarimetric sensor, and the primary architectures that have been exploited for developing imaging polarimeters are discussed.
Abstract: Imaging polarimetry has emerged over the past three decades as a powerful tool to enhance the information available in a variety of remote sensing applications. We discuss the foundations of passive imaging polarimetry, the phenomenological reasons for designing a polarimetric sensor, and the primary architectures that have been exploited for developing imaging polarimeters. Considerations on imaging polarimeters such as calibration, optimization, and error performance are also discussed. We review many important sources and examples from the scientific literature.
1,374 citations
TL;DR: The spaceborne POLDER sensor, which is selected to fly aboard the Japanese ADEOS satellite scheduled for launch in early 1996, has nearly completed phase C of its development at the Centre National d'Etudes Spatiales, the French space agency.
Abstract: This paper introduces the new Polarization and Directionality of the Earth's Reflectances (POLDER) instrument. The spaceborne POLDER sensor, which is selected to fly aboard the Japanese ADEOS satellite scheduled for launch in early 1996, has nearly completed phase C of its development at the Centre National d'Etudes Spatiales, the French space agency. To prepare for the 1996 space mission, airborne prototypes are being tested and evaluated in the framework of various measurement campaigns. The POLDER sensor is designed to collect global observations of polarized and directional solar radiation reflected by the Earth-atmosphere system for climate and global change studies. Aboard the ADEOS platform, the POLDER mission will provide near-daily coverage of the Earth at 6/spl times/7 km/sup 2/ resolution. The POLDER system will offer unprecedented opportunities to observe biophysical parameters over the oceans and land surfaces. The sensor's unique features, when compared to current and planned spaceborne instruments, include its ability to: 1) measure polarized reflectance in the visible and near-infrared spectral regions; 2) observe Earth target reflectance from 12 directions during a single satellite pass; and 3) operate in two dynamic modes in order to achieve both high signal to noise ratio and wide dynamic range. Six of POLDER's eight channels are optimized for observing atmospheric aerosols, clouds, ocean color, and land surfaces. The other two are centered on the H/sub 2/O and O/sub 2/ absorption bands for retrieving atmospheric water vapor amount and cloud top altitude, respectively. POLDER data will be subject to the high calibration standards defined by the POLDER mission team, with absolute calibration accuracies of 2% for the shorter wavelength channels (/spl lambda//spl les/565 nm) and 3% for the longer wavelengths. A 1% accuracy is the goal for the intercalibration between the spectral channels. The POLDER instrument aboard ADEOS will contribute significantly to climate-related research on aerosol cycling, cloud-radiation interactions, the Earth radiation budget, ocean primary productivity, and continental biosphere dynamics. POLDER mission's scientific objectives will be to: 1) map atmospheric aerosols, including their sources and transport, and study their influence on the Earth radiation budget; 2) assess cloud properties, namely their height, phase and type; 3) estimate total integrated water vapor amount; 4) improve Earth radiation budget estimates; 5) estimate chlorophyll-like pigment content in the ocean surface layer and its role in the carbon cycle; and 6) characterize land surface properties and vegetation cover. >
860 citations
TL;DR: This work presents a method allowing for the imposition of two independent and arbitrary phase profiles on any pair of orthogonal states of polarization-linear, circular, or elliptical-relying only on simple, linearly birefringent wave plate elements arranged into metasurfaces.
Abstract: We present a method allowing for the imposition of two independent and arbitrary phase profiles on any pair of orthogonal states of polarization-linear, circular, or elliptical-relying only on simple, linearly birefringent wave plate elements arranged into metasurfaces. This stands in contrast to previous designs which could only address orthogonal linear, and to a limited extent, circular polarizations. Using this approach, we demonstrate chiral holograms characterized by fully independent far fields for each circular polarization and elliptical polarization beam splitters, both in the visible. This approach significantly expands the scope of metasurface polarization optics.
805 citations