Properties of amorphous Bi2S3-crystalline silicon heterojunctions
About: This article is published in Solid-state Electronics.The article was published on 1992-07-01. It has received 1 citations till now. The article focuses on the topics: Nanocrystalline silicon & Crystalline silicon.
Citations
More filters
TL;DR: Theoretical analysis showed that the high optical absorption coefficient of Bi 2 S 3 results in a light-generated current density (J L ) of >20 mA/cM 2 for a c-Si(200 nm)Bi z S 3 (300 nm) stack at a combined film thickness of 500 nm, and with an open circuit voltage (V oc ) of nearly 600 mV.
Abstract: Feasibility of combining p-type crystalline Si (c-Si) of 200―8000 nm in thickness with an n-type bismuth sulfide (Bi 2 S 3 ) thin film of 300 nm in thickness for thin film solar cell is analyzed. Theoretical analysis shows that the high optical absorption coefficient (10 5 cm ―1 ) of Bi 2 S 3 results in a light-generated current density (J L ) of >20 mA/cM 2 for a c-Si(200 nm)Bi z S 3 (300 nm) stack at a combined film thickness of 500 nm, and with an open circuit voltage (V oc ) of nearly 600 mV. Proof-of-concept cell structures were prepared on p-type c-Si wafers of electrical resistivity 1 Ω cm. Any oxide layer at the interface significantly deteriorates the cell parameters. In a cell prepared using evaporated n-Bi 2 S 3 on (p) c-Si, J sc is 3 mA/cm 2 ; V oc is 360 mV; and η is 0.5%; which improved to: 7.2 mA/cm 2 , 485 mV and 1.7%, respectively, after heating the cell in forming gas. A cell with an Sb 2 S 3 (40 nm) thin film as an antireflective coating on Bi 2 S 3 , produced: J sc of 10 mA/cm 2 ; V oc of 480 mV; and η of 2.4%. Theoretical simulation suggests that better cell fabrication could lead to: J sc of 26 mA/cm 2 ; V oc of 600 mV; and η of 10%.
29 citations
References
More filters
10 citations