Quantum Dot Solar Cells. Semiconductor Nanocrystals as Light Harvesters
18 Oct 2008-Journal of Physical Chemistry C (American Chemical Society)-Vol. 112, Iss: 48, pp 18737-18753
TL;DR: In this paper, three major ways to utilize semiconductor dots in solar cell include (i) metal−semiconductor or Schottky junction photovoltaic cell, (ii) polymer−smiconductor hybrid solar cell, and (iii) quantum dot sensitized solar cell.
Abstract: The emergence of semiconductor nanocrystals as the building blocks of nanotechnology has opened up new ways to utilize them in next generation solar cells. This paper focuses on the recent developments in the utilization of semiconductor quantum dots for light energy conversion. Three major ways to utilize semiconductor dots in solar cell include (i) metal−semiconductor or Schottky junction photovoltaic cell (ii) polymer−semiconductor hybrid solar cell, and (iii) quantum dot sensitized solar cell. Modulation of band energies through size control offers new ways to control photoresponse and photoconversion efficiency of the solar cell. Various strategies to maximize photoinduced charge separation and electron transfer processes for improving the overall efficiency of light energy conversion are discussed. Capture and transport of charge carriers within the semiconductor nanocrystal network to achieve efficient charge separation at the electrode surface remains a major challenge. Directing the future resear...
Citations
More filters
TL;DR: The repeatability of photocatalytic activity was tested in order to investigate the stability of C60 and CdS-C60/TiO2 composites and the degradation of dye was determined by UV–vis spectrophotometry.
Abstract: CdSe, CdSe-TiO2, and CdSe-C60/TiO2 composites were prepared using sol–gel method, and their photocatalytic activity was evaluated by measuring the degradation of rhodamine B solutions under visible light. The surface area, surface structure, crystal phase, and elemental identification of these composites were characterized by nitrogen adsorption isotherms, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), and UV-visible (vis) absorption spectrophotometry. XRD showed that the CdSe-C60/TiO2 composite contained a typical single and clear anatase phase. SEM of the CdSe-C60/TiO2 composites revealed a homogenous composition in the particles. EDX revealed the presence of C and Ti with strong Cd and Se peaks in the CdSe-C60/TiO2 composite. The degradation of dye was determined by UV–vis spectrophotometry. An increase in photocatalytic activity was observed and attributed to an increase in the photoabsorption effect by fullerene and the cooperative effect of the CdSe. The repeatability of photocatalytic activity was also tested in order to investigate the stability of C60 and CdS-C60/TiO2 composites.
36 citations
Cites background from "Quantum Dot Solar Cells. Semiconduc..."
...have demonstrated the charge transfer between fullerene clusters and titanium dioxide under visible light; fullerene can be reduced by one-electron function in colloidal TiO2 suspensions and form C60 [14]....
[...]
TL;DR: In this paper, the authors demonstrate an all-fiberized mode-locked laser by employing Molybdenum Disulfide spin-coated onto a side-polished fiber (SPF) as an in-line saturable absorber.
Abstract: We demonstrate an all-fiberized mode-locked laser by employing Molybdenum Disulfide (MoS
2
) spin-coated onto a side-polished fiber (SPF) as an in-line saturable absorber. Single crystal MoS
2
has been exfoliated via the Li intercalation method and then dispersed with large population of few-layer MoS
2
nano-sheets in ethanol. Subsequently, a saturable absorber has been prepared using a relatively simple method: spin-coating the uniform MoS
2
solution on the fabricated SPF without using any polymer or toxic procedure. Power-dependent transmission property of the prepared MoS
2
nano-sheets on the SPF was experimentally analyzed, providing the feasibility to apply it as an efficient in-line saturable absorption behavior. By deploying the MoS
2
SPF into a fiber laser cavity with finely tuned laser pump power and cavity dispersion, mode-locked pulses were obtained at anomalous and normal dispersion of the laser cavity. The self-started soliton pulses at the anomalous dispersion regime were generated with a spectral bandwidth of 9.96 nm at 1584 nm and a pulse duration of 521 fs. Moreover, by managing the dispersion to the normal regime, stable pulses at net-normal intra-cavity dispersion with 11.9 ps pulse duration were obtained with a spectral bandwidth of 18.2 nm at 1570 nm. The results prove the effectiveness of developing MoS
2
saturable absorbers and applications for pulsed laser operation.
36 citations
Cites background from "Quantum Dot Solar Cells. Semiconduc..."
...Over the past few years, nanomaterials such as graphene, carbon nanotubes (CNTs), and semiconductor quantum dots have been widely investigated for their applications to lasers, optical switches, photodetectors, and solar cells [1]–[3]....
[...]
TL;DR: In this article, the impact of QD surface chemistry on Resonance Energy Transfer (RET) was investigated using a pair of different sized CdSe QDs spin-cast onto a glass substrate.
Abstract: Resonance energy transfer (RET) has been shown to occur in films of semiconductor quantum dots (QDs) with variation in QD composition and size. When coupled with charge carrier transfer, RET could provide a complementary strategy for light harvesting in QD based solid state photovoltaic devices. Due to a direct dependence on the optical properties of the donor and acceptor, QD surface chemistry plays a drastic role in determining the efficiency of RET. Here, the impact of QD surface chemistry on RET in QD films was investigated using a pair of different sized CdSe QDs spin-cast onto a glass substrate. The effects of QD surface passivation on RET were studied by removing surface ligands through QD washing and adding an insulating ZnS shell. In addition, QD films were subjected to solid state ligand exchanges with thiolated ligands in order to mimic a layer-by-layer deposition method commonly used in the construction of QD photovoltaics. These solid state ligand exchanges exhibit drastic quenching of RET in...
36 citations
TL;DR: The optical and structural properties of cadmium and lead sulfide nanocrystals deposited on mesoporous TiO2 substrates via the successive ionic layer adsorption and reaction method were comparatively investigated by reflectance, transmittance, micro-Raman and photoluminescence measurements.
Abstract: The optical and structural properties of cadmium and lead sulfide nanocrystals deposited on mesoporous TiO2 substrates via the successive ionic layer adsorption and reaction method were comparatively investigated by reflectance, transmittance, micro-Raman and photoluminescence measurements. Enhanced interfacial electron transfer is evidenced upon direct growth of both CdS and PbS on TiO2 through the marked quenching of their excitonic emission. The optical absorbance of CdS/TiO2 can be tuned over a narrow spectral range. On the other side PbS/TiO2 exhibits a remarkable band gap tunability extending from the visible to the near infrared range, due to the distinct quantum size effects of PbS quantum dots. However, PbS/TiO2 suffers from severe degradation upon air exposure. Degradation effects are much less pronounced for CdS/TiO2 that is appreciably more stable, though it degrades readily upon visible light illumination.
36 citations
Cites background from "Quantum Dot Solar Cells. Semiconduc..."
...One of the most attractive approaches for the utilization of inorganic heterojunctions in DSCs is the exploitation of the exceptional electronic properties of chalcogenide such as CdS, CdSe, PbSe, PbS and CdTe nanocrystals as light harvesting antennas [4-6]....
[...]
TL;DR: This work describes the light-induced preparation of various gold nanoparticles and demonstrates their possible use as efficient photothermal heating materials and practical heterogeneous catalysts under the irradiation of a solar-based light after being loaded onto a paper-based substrate.
Abstract: This work describes the light-induced preparation of various gold nanoparticles and demonstrates their possible use as efficient photothermal heating materials and practical heterogeneous catalysts under the irradiation of a solar-based light after being loaded onto a paper-based substrate. The synthesis of gold nanoparticles was accomplished under the irradiation of daily sunlight and a solar-simulated light with an intensity that was closely adjusted to the one-sun condition. Tunable sizes of gold nanoparticles were systematically controlled by the ratio of trisodium citrate and gold chloride ions, particularly with the solar-simulated light source. The size distribution and absorption properties of the resulting nanoparticles were thoroughly characterized by scanning electron microscope, dynamic light scattering, and UV–visible spectroscopy. The broad-band solar-based light sources were found to be efficient external stimuli to induce/enhance the formation of various gold nanoparticles at room temperat...
36 citations
References
More filters
TL;DR: In this article, an upper theoretical limit for the efficiency of p−n junction solar energy converters, called the detailed balance limit of efficiency, has been calculated for an ideal case in which the only recombination mechanism of holeelectron pairs is radiative as required by the principle of detailed balance.
Abstract: In order to find an upper theoretical limit for the efficiency of p‐n junction solar energy converters, a limiting efficiency, called the detailed balance limit of efficiency, has been calculated for an ideal case in which the only recombination mechanism of hole‐electron pairs is radiative as required by the principle of detailed balance. The efficiency is also calculated for the case in which radiative recombination is only a fixed fraction fc of the total recombination, the rest being nonradiative. Efficiencies at the matched loads have been calculated with band gap and fc as parameters, the sun and cell being assumed to be blackbodies with temperatures of 6000°K and 300°K, respectively. The maximum efficiency is found to be 30% for an energy gap of 1.1 ev and fc = 1. Actual junctions do not obey the predicted current‐voltage relationship, and reasons for the difference and its relevance to efficiency are discussed.
11,071 citations
TL;DR: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects.
Abstract: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects. Some of these applications are now realized in products. Others are demonstrated in early to advanced devices, and one, hydrogen storage, is clouded by controversy. Nanotube cost, polydispersity in nanotube type, and limitations in processing and assembly methods are important barriers for some applications of single-walled nanotubes.
9,693 citations
TL;DR: In this paper, the carrier collection efficiency and energy conversion efficiency of polymer photovoltaic cells were improved by blending of the semiconducting polymer with C60 or its functionalized derivatives.
Abstract: The carrier collection efficiency (ηc) and energy conversion efficiency (ηe) of polymer photovoltaic cells were improved by blending of the semiconducting polymer with C60 or its functionalized derivatives. Composite films of poly(2-methoxy-5-(2′-ethyl-hexyloxy)-1,4-phenylene vinylene) (MEH-PPV) and fullerenes exhibit ηc of about 29 percent of electrons per photon and ηe of about 2.9 percent, efficiencies that are better by more than two orders of magnitude than those that have been achieved with devices made with pure MEH-PPV. The efficient charge separation results from photoinduced electron transfer from the MEH-PPV (as donor) to C60 (as acceptor); the high collection efficiency results from a bicontinuous network of internal donor-acceptor heterojunctions.
9,611 citations
TL;DR: In this paper, the authors describe recent progress in the theory of nanoparticle optical properties, particularly methods for solving Maxwell's equations for light scattering from particles of arbitrary shape in a complex environment.
Abstract: The optical properties of metal nanoparticles have long been of interest in physical chemistry, starting with Faraday's investigations of colloidal gold in the middle 1800s. More recently, new lithographic techniques as well as improvements to classical wet chemistry methods have made it possible to synthesize noble metal nanoparticles with a wide range of sizes, shapes, and dielectric environments. In this feature article, we describe recent progress in the theory of nanoparticle optical properties, particularly methods for solving Maxwell's equations for light scattering from particles of arbitrary shape in a complex environment. Included is a description of the qualitative features of dipole and quadrupole plasmon resonances for spherical particles; a discussion of analytical and numerical methods for calculating extinction and scattering cross-sections, local fields, and other optical properties for nonspherical particles; and a survey of applications to problems of recent interest involving triangula...
9,086 citations
TL;DR: Semiconductor nanocrystals prepared for use as fluorescent probes in biological staining and diagnostics have a narrow, tunable, symmetric emission spectrum and are photochemically stable.
Abstract: Semiconductor nanocrystals were prepared for use as fluorescent probes in biological staining and diagnostics. Compared with conventional fluorophores, the nanocrystals have a narrow, tunable, symmetric emission spectrum and are photochemically stable. The advantages of the broad, continuous excitation spectrum were demonstrated in a dual-emission, single-excitation labeling experiment on mouse fibroblasts. These nanocrystal probes are thus complementary and in some cases may be superior to existing fluorophores.
8,542 citations