scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Quantum Dot Solar Cells. Semiconductor Nanocrystals as Light Harvesters

18 Oct 2008-Journal of Physical Chemistry C (American Chemical Society)-Vol. 112, Iss: 48, pp 18737-18753
TL;DR: In this paper, three major ways to utilize semiconductor dots in solar cell include (i) metal−semiconductor or Schottky junction photovoltaic cell, (ii) polymer−smiconductor hybrid solar cell, and (iii) quantum dot sensitized solar cell.
Abstract: The emergence of semiconductor nanocrystals as the building blocks of nanotechnology has opened up new ways to utilize them in next generation solar cells. This paper focuses on the recent developments in the utilization of semiconductor quantum dots for light energy conversion. Three major ways to utilize semiconductor dots in solar cell include (i) metal−semiconductor or Schottky junction photovoltaic cell (ii) polymer−semiconductor hybrid solar cell, and (iii) quantum dot sensitized solar cell. Modulation of band energies through size control offers new ways to control photoresponse and photoconversion efficiency of the solar cell. Various strategies to maximize photoinduced charge separation and electron transfer processes for improving the overall efficiency of light energy conversion are discussed. Capture and transport of charge carriers within the semiconductor nanocrystal network to achieve efficient charge separation at the electrode surface remains a major challenge. Directing the future resear...
Citations
More filters
Journal ArticleDOI
TL;DR: An optimized configuration of the quasisolid electrolyte contains 5-mercapto-1-methyltetrazole N-tetramethylammonium/disulfide/LiClO4/N-methylbenzimidazole in the molar ratio of 0.8:0.1.
Abstract: For the first time, a quasisolid thiolate/disulfide-based electrolyte was prepared using succinonitrile as a matrix. An optimized configuration of the quasisolid electrolyte contains 5-mercapto-1-methyltetrazole N-tetramethylammonium/disulfide/LiClO4/N-methylbenzimidazole in the molar ratio of 0.8:0.8:0.1:0.1. Dye-sensitized solar cells fabricated using this quasisolid electrolyte, together with N719 dye-sensitized photoelectrode and CoS counter electrode, attained power conversion efficiencies of 4.25% at 1 sun and 6.19% at 0.1 sun illumination intensities. The optimized quasisolid electrolyte, when introduced to quasisolid CdS quantum-dot-sensitized solar cells, exhibited a power conversion efficiency of 0.94%, despite the fact that CdS absorbs only a small fraction of the visible light, unlike dyes. The encouraging results show the potential for the utilization of the quasisolid thiolate/disulfide-based electrolyte in sensitized solar cells.

27 citations

Journal ArticleDOI
TL;DR: In this paper, an ultrathin layer (≈10 nm) of amorphous TiO2 on top of the graphene blocks the micro-cracks, thereby resulting in complete protection to the Cu2O absorber layer.
Abstract: Mitigating photocorrosion in the light absorber material used for photoelectrochemical solar water splitting is a subject of major research. In this work, a systematic investigation is carried out on suppressing the photocorrosion in an electrodeposited Cu2O photocathode using stable protective layers. The photocathode protected with chemical vapor deposited graphene offers significant stability, till 600 s during light chopping chronoamperometry. However, the presence of a few microcracks in the graphene layer cannot offer complete protection, and causes a gradual decay in the photocurrent. The addition of an ultrathin layer (≈10 nm) of amorphous TiO2 on top of the graphene blocks the microcracks, thereby resulting in complete protection to the Cu2O absorber layer. The TiO2/graphene protected Cu2O photocathode generates -3 mA cm−2 photocurrent at 0.0 V versus reversible hydrogen electrode under 1 sun in 1 m Na2SO4 electrolyte (pH 7), which is twice that compared to the bare Cu2O electrode. The enhancement in photocurrent can be attributed to the ease of separating the photogenerated charge carriers due to the suitable band alignment and electron selective nature of the protective TiO2/graphene layers.

27 citations

Journal ArticleDOI
TL;DR: In this article, the authors used a transient grating technique to characterize the ultrafast carrier dynamics in PbS quantum dots (QDs) and found that MEG began in as fast as 200 fs and complete around 3 ps when the excitation photon energy was greater than 2.7E g (E g : band gap between LUMO and HOMO in the QDs).

27 citations

Journal ArticleDOI
TL;DR: In this paper, the photoinduced ET between water-soluble CdTe QDs and nitrobenzene amine (NBzA) through specific cucurbit[6]uril host−guest complex interactions was investigated.
Abstract: Interfacial electron transfer (ET) to and from semiconductor quantum dots (QDs) is of intense interest because of its important roles in many applications, including biosensors, light-emitting diodes, and solar cells. In this work, we have investigated the photoinduced ET between water-soluble CdTe QDs and nitrobenzene amine (NBzA) through specific cucurbit[6]uril host−guest complex interactions. The modification of cucurbit[6]uril on the QD surface with thiol linker groups significantly improved the physical and chemical stability of QDs. The steady-state and time-resolved fluorescence and absorption spectroscopies were combined to clarify the process of ET from the excited QDs to the guest NBzA molecules in the cucurbit[6]uril cavity. Furthermore, single-particle fluorescence correlation spectroscopy (FCS) experiments revealed that the blinking phenomenon in the microsecond time scale was attributed to the charge separation between the QD and the NBzA molecule.

27 citations

Journal ArticleDOI
TL;DR: New understanding is provided regarding the operation mechanisms of photoelectrochemical cells, while presenting a new strategy for constructing a high-voltage QDSSCs which incorporates the photoinduced dipole (PID) phenomenon for improved open circuit voltage (Voc).
Abstract: A high photovoltage is an essential ingredient for the construction of a high-efficiency quantum dot sensitized solar cell (QDSSC). In this paper we present a novel configuration of QDSSC which incorporates the photoinduced dipole (PID) phenomenon for improved open circuit voltage (Voc). This configuration, unlike previously studied ones with molecular dipoles, is based on a dipole moment which is created only under illumination and is a result of exciton dissociation. The generation of photodipoles was achieved by the creation of long-lived trapped holes inside a core of type-II ZnSe/CdS colloidal core/shell QDs, which are placed on top of the standard CdS QD sensitizer layer. Upon photoexcitation, the created photodipole negatively shifts the TiO2 energy bands, resulting in a photovoltage that is higher by ∼100 mV compared to the standard cell, without type-II QDs. The extra photovoltage gained diminishes the excessive overpotential losses caused by the energetic difference between the CdS sensitizer layer and the TiO2, without harming the charge injection processes. Moreover, we show that the extent of the additional photovoltage is controlled by the illumination intensity. This work provides new understanding regarding the operation mechanisms of photoelectrochemical cells, while presenting a new strategy for constructing a high-voltage QDSSCs. In addition, the PID effect has the potential to be implemented in other promising photovoltaic technologies.

27 citations

References
More filters
Journal ArticleDOI
TL;DR: In this article, an upper theoretical limit for the efficiency of p−n junction solar energy converters, called the detailed balance limit of efficiency, has been calculated for an ideal case in which the only recombination mechanism of holeelectron pairs is radiative as required by the principle of detailed balance.
Abstract: In order to find an upper theoretical limit for the efficiency of p‐n junction solar energy converters, a limiting efficiency, called the detailed balance limit of efficiency, has been calculated for an ideal case in which the only recombination mechanism of hole‐electron pairs is radiative as required by the principle of detailed balance. The efficiency is also calculated for the case in which radiative recombination is only a fixed fraction fc of the total recombination, the rest being nonradiative. Efficiencies at the matched loads have been calculated with band gap and fc as parameters, the sun and cell being assumed to be blackbodies with temperatures of 6000°K and 300°K, respectively. The maximum efficiency is found to be 30% for an energy gap of 1.1 ev and fc = 1. Actual junctions do not obey the predicted current‐voltage relationship, and reasons for the difference and its relevance to efficiency are discussed.

11,071 citations

Journal ArticleDOI
02 Aug 2002-Science
TL;DR: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects.
Abstract: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects. Some of these applications are now realized in products. Others are demonstrated in early to advanced devices, and one, hydrogen storage, is clouded by controversy. Nanotube cost, polydispersity in nanotube type, and limitations in processing and assembly methods are important barriers for some applications of single-walled nanotubes.

9,693 citations

Journal ArticleDOI
15 Dec 1995-Science
TL;DR: In this paper, the carrier collection efficiency and energy conversion efficiency of polymer photovoltaic cells were improved by blending of the semiconducting polymer with C60 or its functionalized derivatives.
Abstract: The carrier collection efficiency (ηc) and energy conversion efficiency (ηe) of polymer photovoltaic cells were improved by blending of the semiconducting polymer with C60 or its functionalized derivatives. Composite films of poly(2-methoxy-5-(2′-ethyl-hexyloxy)-1,4-phenylene vinylene) (MEH-PPV) and fullerenes exhibit ηc of about 29 percent of electrons per photon and ηe of about 2.9 percent, efficiencies that are better by more than two orders of magnitude than those that have been achieved with devices made with pure MEH-PPV. The efficient charge separation results from photoinduced electron transfer from the MEH-PPV (as donor) to C60 (as acceptor); the high collection efficiency results from a bicontinuous network of internal donor-acceptor heterojunctions.

9,611 citations

Journal ArticleDOI
TL;DR: In this paper, the authors describe recent progress in the theory of nanoparticle optical properties, particularly methods for solving Maxwell's equations for light scattering from particles of arbitrary shape in a complex environment.
Abstract: The optical properties of metal nanoparticles have long been of interest in physical chemistry, starting with Faraday's investigations of colloidal gold in the middle 1800s. More recently, new lithographic techniques as well as improvements to classical wet chemistry methods have made it possible to synthesize noble metal nanoparticles with a wide range of sizes, shapes, and dielectric environments. In this feature article, we describe recent progress in the theory of nanoparticle optical properties, particularly methods for solving Maxwell's equations for light scattering from particles of arbitrary shape in a complex environment. Included is a description of the qualitative features of dipole and quadrupole plasmon resonances for spherical particles; a discussion of analytical and numerical methods for calculating extinction and scattering cross-sections, local fields, and other optical properties for nonspherical particles; and a survey of applications to problems of recent interest involving triangula...

9,086 citations

Journal ArticleDOI
25 Sep 1998-Science
TL;DR: Semiconductor nanocrystals prepared for use as fluorescent probes in biological staining and diagnostics have a narrow, tunable, symmetric emission spectrum and are photochemically stable.
Abstract: Semiconductor nanocrystals were prepared for use as fluorescent probes in biological staining and diagnostics. Compared with conventional fluorophores, the nanocrystals have a narrow, tunable, symmetric emission spectrum and are photochemically stable. The advantages of the broad, continuous excitation spectrum were demonstrated in a dual-emission, single-excitation labeling experiment on mouse fibroblasts. These nanocrystal probes are thus complementary and in some cases may be superior to existing fluorophores.

8,542 citations