scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Quantum Dot Solar Cells. Semiconductor Nanocrystals as Light Harvesters

18 Oct 2008-Journal of Physical Chemistry C (American Chemical Society)-Vol. 112, Iss: 48, pp 18737-18753
TL;DR: In this paper, three major ways to utilize semiconductor dots in solar cell include (i) metal−semiconductor or Schottky junction photovoltaic cell, (ii) polymer−smiconductor hybrid solar cell, and (iii) quantum dot sensitized solar cell.
Abstract: The emergence of semiconductor nanocrystals as the building blocks of nanotechnology has opened up new ways to utilize them in next generation solar cells. This paper focuses on the recent developments in the utilization of semiconductor quantum dots for light energy conversion. Three major ways to utilize semiconductor dots in solar cell include (i) metal−semiconductor or Schottky junction photovoltaic cell (ii) polymer−semiconductor hybrid solar cell, and (iii) quantum dot sensitized solar cell. Modulation of band energies through size control offers new ways to control photoresponse and photoconversion efficiency of the solar cell. Various strategies to maximize photoinduced charge separation and electron transfer processes for improving the overall efficiency of light energy conversion are discussed. Capture and transport of charge carriers within the semiconductor nanocrystal network to achieve efficient charge separation at the electrode surface remains a major challenge. Directing the future resear...
Citations
More filters
Journal ArticleDOI
TL;DR: In this paper, an overview on the development of photosensitizers, including the sensing principle of photoelectrochemical biosensors, and the latest developments and applications are also included.
Abstract: Photoelectrochemical biosensors developed from solar cells have received increasing attention due to their desirable sensitivity and better analytical performance. In recent decades, much attention has been paid to the preparation of photoelectrochemical biosensors. This paper aims to provide an overview on the development of photosensitizers, including the sensing principle of photoelectrochemical biosensors and a special kind of photoelectrochemical biosensor without external irradiation. The latest developments and applications are also included.

135 citations

Journal ArticleDOI
TL;DR: The designed composite CNT/metal-sulfide electrodes offer an important guideline for the development of next level energy conversion and energy storage devices.
Abstract: Carbon nanotubes (CNT) and metal sulfides have attracted considerable attention owing to their outstanding properties and multiple application areas, such as electrochemical energy conversion and energy storage. Here we describes a cost-effective and facile solution approach to the preparation of metal sulfides (PbS, CuS, CoS, and NiS) grown directly on CNTs, such as CNT/PbS, CNT/CuS, CNT/CoS, and CNT/NiS flexible electrodes for quantum dot-sensitized solar cells (QDSSCs) and supercapacitors (SCs). X-ray photoelectron spectroscopy, X-ray diffraction, and transmission electron microscopy confirmed that the CNT network was covered with high-purity metal sulfide compounds. QDSSCs equipped with the CNT/NiS counter electrode (CE) showed an impressive energy conversion efficiency (η) of 6.41% and remarkable stability. Interestingly, the assembled symmetric CNT/NiS-based polysulfide SC device exhibited a maximal energy density of 35.39 W h kg−1 and superior cycling durability with 98.39% retention after 1,000 cycles compared to the other CNT/metal-sulfides. The elevated performance of the composites was attributed mainly to the good conductivity, high surface area with mesoporous structures and stability of the CNTs and the high electrocatalytic activity of the metal sulfides. Overall, the designed composite CNT/metal-sulfide electrodes offer an important guideline for the development of next level energy conversion and energy storage devices.

134 citations


Cites result from "Quantum Dot Solar Cells. Semiconduc..."

  • ...The variation of J0 values is consistent with the Rct values obtained in the EIS measurements and both values are related to the following equation (1):...

    [...]

Journal ArticleDOI
TL;DR: The zinc oxide-reduced graphene oxide (RGO) nanocomposites were greenly synthesized by one-step hydrothermal reaction with ZnCl2 and graphite oxide (GO) as precursors without extra reductant to achieve photo-degradation of Rhodamine B and photo-reduction of CO2 under the illumination of simulated solar light at ambient temperature.

134 citations

Journal ArticleDOI
TL;DR: Colloidal Cu2ZnSnS4 (CZTS) nanoparticles with sizes of 5-6 nm were successfully synthesized through thermal reactions of metal acetate and sulfur in high-temperature oleylamine solution.
Abstract: Colloidal Cu2ZnSnS4 (CZTS) nanoparticles with sizes of 5–6 nm that contain no highly toxic elements were successfully synthesized through thermal reactions of metal acetate and sulfur in high-temperature oleylamine solution. The reaction temperature was a key factor for the synthesis of CZTS nanoparticles: synthesis at temperatures higher than 240 °C gave a pure CZTS crystal phase, whereas a secondary phase of CuS was formed at reaction temperatures lower than 180 °C. Nanoparticles were successfully accumulated on ITO-coated or quartz glass substrates via layer-by-layer deposition using 1,2-ethanedithiol as a cross-linking agent. The resulting CZTS particle films exhibited a photoresponse similar to that of p-type semiconductor photoelectrodes in an aqueous solution containing Eu(NO3)3 as an electron scavenger. Potentials of the valence band edge and conduction band edge were determined from the onset potential of the cathodic photocurrent to be +0.3 and −1.2 V vs. Ag/AgCl, respectively.

133 citations

Journal ArticleDOI
TL;DR: Some effective routes to suppress charge recombination processes, such as adopting preprepared high-quality QD sensitizers, tailoring the electronic properties of QDs, and interface engineering with the use of organic or inorganic thin layer overcoating the sensitized photoanode have been overviewed.
Abstract: Benefiting from the unique excellent optoelectronic properties of quantum dot light absorbers, quantum dot sensitized solar cell (QDSCs) are a promising candidate for the low-cost third-generation solar cells. Over the past few years, the power conversion efficiency (PCE) of QDSCs presents a rapid evolution from less than 1% to beyond 8%. Charge recombination is regarded as one of the most significant factors in limiting the photovoltaic performance of QDSCs. A significant improvement in the PCE of QDSCs has been obtained by charge recombination control. Some effective routes to suppress charge recombination processes, such as adopting preprepared high-quality QD sensitizers, tailoring the electronic properties of QDs, and interface engineering with the use of organic or inorganic thin layer overcoating the sensitized photoanode have been overviewed in this perspective. Also, the possible accesses to better performance (higher efficiency and stability) of the QDSCs have been proposed on the basis of achie...

132 citations

References
More filters
Journal ArticleDOI
TL;DR: In this article, an upper theoretical limit for the efficiency of p−n junction solar energy converters, called the detailed balance limit of efficiency, has been calculated for an ideal case in which the only recombination mechanism of holeelectron pairs is radiative as required by the principle of detailed balance.
Abstract: In order to find an upper theoretical limit for the efficiency of p‐n junction solar energy converters, a limiting efficiency, called the detailed balance limit of efficiency, has been calculated for an ideal case in which the only recombination mechanism of hole‐electron pairs is radiative as required by the principle of detailed balance. The efficiency is also calculated for the case in which radiative recombination is only a fixed fraction fc of the total recombination, the rest being nonradiative. Efficiencies at the matched loads have been calculated with band gap and fc as parameters, the sun and cell being assumed to be blackbodies with temperatures of 6000°K and 300°K, respectively. The maximum efficiency is found to be 30% for an energy gap of 1.1 ev and fc = 1. Actual junctions do not obey the predicted current‐voltage relationship, and reasons for the difference and its relevance to efficiency are discussed.

11,071 citations

Journal ArticleDOI
02 Aug 2002-Science
TL;DR: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects.
Abstract: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects. Some of these applications are now realized in products. Others are demonstrated in early to advanced devices, and one, hydrogen storage, is clouded by controversy. Nanotube cost, polydispersity in nanotube type, and limitations in processing and assembly methods are important barriers for some applications of single-walled nanotubes.

9,693 citations

Journal ArticleDOI
15 Dec 1995-Science
TL;DR: In this paper, the carrier collection efficiency and energy conversion efficiency of polymer photovoltaic cells were improved by blending of the semiconducting polymer with C60 or its functionalized derivatives.
Abstract: The carrier collection efficiency (ηc) and energy conversion efficiency (ηe) of polymer photovoltaic cells were improved by blending of the semiconducting polymer with C60 or its functionalized derivatives. Composite films of poly(2-methoxy-5-(2′-ethyl-hexyloxy)-1,4-phenylene vinylene) (MEH-PPV) and fullerenes exhibit ηc of about 29 percent of electrons per photon and ηe of about 2.9 percent, efficiencies that are better by more than two orders of magnitude than those that have been achieved with devices made with pure MEH-PPV. The efficient charge separation results from photoinduced electron transfer from the MEH-PPV (as donor) to C60 (as acceptor); the high collection efficiency results from a bicontinuous network of internal donor-acceptor heterojunctions.

9,611 citations

Journal ArticleDOI
TL;DR: In this paper, the authors describe recent progress in the theory of nanoparticle optical properties, particularly methods for solving Maxwell's equations for light scattering from particles of arbitrary shape in a complex environment.
Abstract: The optical properties of metal nanoparticles have long been of interest in physical chemistry, starting with Faraday's investigations of colloidal gold in the middle 1800s. More recently, new lithographic techniques as well as improvements to classical wet chemistry methods have made it possible to synthesize noble metal nanoparticles with a wide range of sizes, shapes, and dielectric environments. In this feature article, we describe recent progress in the theory of nanoparticle optical properties, particularly methods for solving Maxwell's equations for light scattering from particles of arbitrary shape in a complex environment. Included is a description of the qualitative features of dipole and quadrupole plasmon resonances for spherical particles; a discussion of analytical and numerical methods for calculating extinction and scattering cross-sections, local fields, and other optical properties for nonspherical particles; and a survey of applications to problems of recent interest involving triangula...

9,086 citations

Journal ArticleDOI
25 Sep 1998-Science
TL;DR: Semiconductor nanocrystals prepared for use as fluorescent probes in biological staining and diagnostics have a narrow, tunable, symmetric emission spectrum and are photochemically stable.
Abstract: Semiconductor nanocrystals were prepared for use as fluorescent probes in biological staining and diagnostics. Compared with conventional fluorophores, the nanocrystals have a narrow, tunable, symmetric emission spectrum and are photochemically stable. The advantages of the broad, continuous excitation spectrum were demonstrated in a dual-emission, single-excitation labeling experiment on mouse fibroblasts. These nanocrystal probes are thus complementary and in some cases may be superior to existing fluorophores.

8,542 citations