Quantum Dot Solar Cells. Semiconductor Nanocrystals as Light Harvesters
18 Oct 2008-Journal of Physical Chemistry C (American Chemical Society)-Vol. 112, Iss: 48, pp 18737-18753
TL;DR: In this paper, three major ways to utilize semiconductor dots in solar cell include (i) metal−semiconductor or Schottky junction photovoltaic cell, (ii) polymer−smiconductor hybrid solar cell, and (iii) quantum dot sensitized solar cell.
Abstract: The emergence of semiconductor nanocrystals as the building blocks of nanotechnology has opened up new ways to utilize them in next generation solar cells. This paper focuses on the recent developments in the utilization of semiconductor quantum dots for light energy conversion. Three major ways to utilize semiconductor dots in solar cell include (i) metal−semiconductor or Schottky junction photovoltaic cell (ii) polymer−semiconductor hybrid solar cell, and (iii) quantum dot sensitized solar cell. Modulation of band energies through size control offers new ways to control photoresponse and photoconversion efficiency of the solar cell. Various strategies to maximize photoinduced charge separation and electron transfer processes for improving the overall efficiency of light energy conversion are discussed. Capture and transport of charge carriers within the semiconductor nanocrystal network to achieve efficient charge separation at the electrode surface remains a major challenge. Directing the future resear...
Citations
More filters
TL;DR: In this paper, ternary hybrid solar cells based on CdSe nanoparticles and a PPV-type polymer containing fluorene and thiophene units (PFT) were investigated.
Abstract: Hybrid solar cells based on CdSe nanoparticles and a PPV-type polymer containing fluorene and thiophene units (PFT) were investigated. The CdSe/PFT devices showed very low photocurrent and fill factor values, which was attributed to the poor charge transport in the TOPO-capped CdSe nanoparticle phase. Thus, ternary systems based on mixtures of PFT/CdSe and the fullerene derivative PCBM were investigated. The CdSe:PCBM ratio was varied, and nanoparticles with different sizes were also used. It was observed that for the optimized composition of 20 wt% PFT + 40 wt% CdSe + 40 wt% PCBM the devices presented higher photocurrents and efficiencies. The photophysical and electrochemical properties and microscopy images (AFM and HRTEM) of the ternary systems were systematically investigated to elucidate the mechanism of action of the inorganic nanoparticles in these ternary hybrid devices.
88 citations
TL;DR: In this paper, the introduction of pyridine during the synthesis of methylammonium lead bromide (MAPbBr3) perovskite nanocrystals can transform threedimensional (3D) cubes into two-dimensional (2D) nanostructures.
Abstract: Engineering the surface energy through careful manipulation of the surface chemistry is a convenient approach to control quantum confinement and structure dimensionality during nanocrystal growth. Here, we demonstrate that the introduction of pyridine during the synthesis of methylammonium lead bromide (MAPbBr3) perovskite nanocrystals can transform three-dimensional (3D) cubes into two-dimensional (2D) nanostructures. Density functional theory (DFT) calculations show that pyridine preferentially binds to Pb atoms terminating the surface, driving the selective 2D growth of the nanostructures. These 2D nanostructures exhibit strong quantum confinement effects, high photoluminescence quantum yields in the visible spectral range, and efficient charge transfer to molecular acceptors. These qualities indicate the suitability of the synthesized 2D nanostructures for a wide range of optoelectronic applications.
88 citations
TL;DR: In this paper, inorganic-organic heterojunction, Sb2S3, DPA treatment, recombination reference EPFL-ARTICLE-185563, was discussed.
Abstract: Keywords: inorganic-organic heterojunction ; Sb2S3 ; DPA treatment ; recombination Reference EPFL-ARTICLE-185563doi:10.1002/aenm.201200540View record in Web of Science Record created on 2013-03-28, modified on 2016-08-09
88 citations
TL;DR: This review looks at how single nanocrystal spectroscopy has been applied to materials based on modern synthetic techniques and how these studies are elucidating properties that remain hidden at the ensemble level.
Abstract: As colloidal semiconductor nanocrystals are developed for a wider range of diverse applications, it becomes more important to gain a deeper understanding of their properties in order to direct synthetic efforts. While most synthetic developments are guided by changes in ensemble properties, certain applications such as those in nano-electronics and nano-photonics rely on properties of nanocrystals at the individual level. For such applications and even for a more detailed understanding of the ensemble behavior, single nanocrystal spectroscopy becomes a vital tool. This review looks at how single nanocrystal spectroscopy has been applied to materials based on modern synthetic techniques and how these studies are elucidating properties that remain hidden at the ensemble level. First, recent theoretical models that are important for understanding many observed phenomena are explored. Then the review highlights new insights into many of the photophysical properties that are of interest in semiconductor nanocrystal materials, such as the ubiquitous spectral instability, magneto-optical identification of the band-edge exciton fine structure, emission from multi-excitons, and the spectroscopic properties of charged nanocrystals that challenge long standing theories on photoluminescence blinking behavior. To date most of the research has been conducted on materials based on cadmium selenide primarily due to its many years of development as a prototypical nanocrystal system. The review ends with a discussion of new materials that would also benefit from a detailed photophysical understanding afforded by single nanocrystal spectroscopy.
88 citations
TL;DR: In this article, the authors presented the results of a study conducted by the National Natural Science Foundation of China (NSF) and the National High Technology Research and Development Program (NHP) of China.
88 citations
References
More filters
TL;DR: In this article, an upper theoretical limit for the efficiency of p−n junction solar energy converters, called the detailed balance limit of efficiency, has been calculated for an ideal case in which the only recombination mechanism of holeelectron pairs is radiative as required by the principle of detailed balance.
Abstract: In order to find an upper theoretical limit for the efficiency of p‐n junction solar energy converters, a limiting efficiency, called the detailed balance limit of efficiency, has been calculated for an ideal case in which the only recombination mechanism of hole‐electron pairs is radiative as required by the principle of detailed balance. The efficiency is also calculated for the case in which radiative recombination is only a fixed fraction fc of the total recombination, the rest being nonradiative. Efficiencies at the matched loads have been calculated with band gap and fc as parameters, the sun and cell being assumed to be blackbodies with temperatures of 6000°K and 300°K, respectively. The maximum efficiency is found to be 30% for an energy gap of 1.1 ev and fc = 1. Actual junctions do not obey the predicted current‐voltage relationship, and reasons for the difference and its relevance to efficiency are discussed.
11,071 citations
TL;DR: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects.
Abstract: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects. Some of these applications are now realized in products. Others are demonstrated in early to advanced devices, and one, hydrogen storage, is clouded by controversy. Nanotube cost, polydispersity in nanotube type, and limitations in processing and assembly methods are important barriers for some applications of single-walled nanotubes.
9,693 citations
TL;DR: In this paper, the carrier collection efficiency and energy conversion efficiency of polymer photovoltaic cells were improved by blending of the semiconducting polymer with C60 or its functionalized derivatives.
Abstract: The carrier collection efficiency (ηc) and energy conversion efficiency (ηe) of polymer photovoltaic cells were improved by blending of the semiconducting polymer with C60 or its functionalized derivatives. Composite films of poly(2-methoxy-5-(2′-ethyl-hexyloxy)-1,4-phenylene vinylene) (MEH-PPV) and fullerenes exhibit ηc of about 29 percent of electrons per photon and ηe of about 2.9 percent, efficiencies that are better by more than two orders of magnitude than those that have been achieved with devices made with pure MEH-PPV. The efficient charge separation results from photoinduced electron transfer from the MEH-PPV (as donor) to C60 (as acceptor); the high collection efficiency results from a bicontinuous network of internal donor-acceptor heterojunctions.
9,611 citations
TL;DR: In this paper, the authors describe recent progress in the theory of nanoparticle optical properties, particularly methods for solving Maxwell's equations for light scattering from particles of arbitrary shape in a complex environment.
Abstract: The optical properties of metal nanoparticles have long been of interest in physical chemistry, starting with Faraday's investigations of colloidal gold in the middle 1800s. More recently, new lithographic techniques as well as improvements to classical wet chemistry methods have made it possible to synthesize noble metal nanoparticles with a wide range of sizes, shapes, and dielectric environments. In this feature article, we describe recent progress in the theory of nanoparticle optical properties, particularly methods for solving Maxwell's equations for light scattering from particles of arbitrary shape in a complex environment. Included is a description of the qualitative features of dipole and quadrupole plasmon resonances for spherical particles; a discussion of analytical and numerical methods for calculating extinction and scattering cross-sections, local fields, and other optical properties for nonspherical particles; and a survey of applications to problems of recent interest involving triangula...
9,086 citations
TL;DR: Semiconductor nanocrystals prepared for use as fluorescent probes in biological staining and diagnostics have a narrow, tunable, symmetric emission spectrum and are photochemically stable.
Abstract: Semiconductor nanocrystals were prepared for use as fluorescent probes in biological staining and diagnostics. Compared with conventional fluorophores, the nanocrystals have a narrow, tunable, symmetric emission spectrum and are photochemically stable. The advantages of the broad, continuous excitation spectrum were demonstrated in a dual-emission, single-excitation labeling experiment on mouse fibroblasts. These nanocrystal probes are thus complementary and in some cases may be superior to existing fluorophores.
8,542 citations