Quantum Dot Solar Cells. Semiconductor Nanocrystals as Light Harvesters
18 Oct 2008-Journal of Physical Chemistry C (American Chemical Society)-Vol. 112, Iss: 48, pp 18737-18753
TL;DR: In this paper, three major ways to utilize semiconductor dots in solar cell include (i) metal−semiconductor or Schottky junction photovoltaic cell, (ii) polymer−smiconductor hybrid solar cell, and (iii) quantum dot sensitized solar cell.
Abstract: The emergence of semiconductor nanocrystals as the building blocks of nanotechnology has opened up new ways to utilize them in next generation solar cells. This paper focuses on the recent developments in the utilization of semiconductor quantum dots for light energy conversion. Three major ways to utilize semiconductor dots in solar cell include (i) metal−semiconductor or Schottky junction photovoltaic cell (ii) polymer−semiconductor hybrid solar cell, and (iii) quantum dot sensitized solar cell. Modulation of band energies through size control offers new ways to control photoresponse and photoconversion efficiency of the solar cell. Various strategies to maximize photoinduced charge separation and electron transfer processes for improving the overall efficiency of light energy conversion are discussed. Capture and transport of charge carriers within the semiconductor nanocrystal network to achieve efficient charge separation at the electrode surface remains a major challenge. Directing the future resear...
Citations
More filters
TL;DR: A strategy to evenly deposit Sb2Se3 nanoparticles on mesoporous TiO2 as confirmed by Raman spectroscopy, energy-dispersive X-ray spectrometry, and transmission electron microscopy is reported, which can be improved 3-fold by annealing at low temperatures.
Abstract: Photovoltaic devices comprising metal chalcogenide nanocrystals as light-harvesting components are emerging as a promising power-generation technology. Here, we report a strategy to evenly deposit Sb2Se3 nanoparticles on mesoporous TiO2 as confirmed by Raman spectroscopy, energy-dispersive X-ray spectrometry, and transmission electron microscopy. Detailed study of the interfacial charge transfer dynamics by means of transient absorption spectroscopy provides evidence of electron injection across the Sb2Se3/TiO2 interface upon illumination, which can be improved 3-fold by annealing at low temperatures. Following addition of the spiro-OMeTAD hole transporting material, regeneration yields exceeding 80% are achieved, and the lifetime of the charge separated species is found to be on the millisecond time scale (τ50% ∼ 50 ms). These findings are discussed with respect to the design of solid-state Sb2Se3 sensitized solar cells.
79 citations
TL;DR: In this article, a dye-sensitized solar cell based on a thermoelectric Bi2Te3/TiO2 composite anode is demonstrated, in which the incorporated Bi 2Te3 nanoplates function as built-in nanoscale electron generators to convert waste heat to electricity and as a good photoreaction catalyst to enhance the charge transfer rate.
Abstract: A new dye-sensitized solar cell based on a thermoelectric Bi2Te3/TiO2 composite anode is demonstrated, in which the incorporated Bi2Te3 nanoplates function as built-in nanoscale electron generators to convert “waste heat” to electricity and as a good photoreaction catalyst to enhance the charge transfer rate, resulting in 28% improvement of the overall power conversion efficiency.
79 citations
TL;DR: In this article, the optical and transport properties of the Mott insulator LaVO${}_{3}$ have been studied in a working device, discussing the advantages and challenges of using a Mott-insulator, and showing the way for further solar cells based on strongly correlated electron systems.
Abstract: Finding solar absorbers that are chemically stable and made of abundant elements will promote the improvement of photovoltaic technology. Perhaps surprisingly, the prototypical Mott insulator LaVO${}_{3}$ is promising in this arena, as it strongly absorbs visible light and has a suitable band gap. The authors study the optical and transport properties of this material in a working device, discussing the advantages and challenges of using a Mott insulator, and showing the way for further solar cells based on strongly correlated electron systems.
79 citations
TL;DR: In this article, the authors summarize the most important experimental results from the recent publications concerning the fascinating properties of graphene electrodes and their applications in various types of solar cells and discuss the state of the art of different graphene synthesis processes and functionalization for the applications in solar cells.
Abstract: To date graphene and graphene-derived materials have created an immense research interests due to its extraordinary physical, chemical, and physiochemical properties, which delineated graphene as an outstanding material for future electronics, optics, and energy-harvesting devices. Typically, graphene has high mobility and optical transparency along with excellent mechanical properties and chemical inertness. Single-layer graphene exhibits ultrahigh optical transmissivity (∼98%), which allows passing through wide range of light wave lengths, thus designated as an ever-reported material for an optically conducting window. Furthermore, graphene’s optical, electrical, and electrocatalytic properties can be tuned by applying different chemical functionalization protocols, which make it one of the most suitable candidates for advanced applications in optoelectronic and energy-harvesting devices. This review is intended to summarize the most important experimental results from the recent publications concerning the fascinating properties of graphene electrodes and their applications in various types of solar cells. Furthermore, the state of the art of different graphene synthesis processes and functionalization for the applications in solar cells are also discussed in this review.
78 citations
TL;DR: In this paper, the zinc sulfide (ZnS) nanomaterials with well-defined mesoporosity were synthesized with the assistance of sonochemistry in an ethanol system of Zn(NO3)2 and Na2S, without using any templates or surfactants.
Abstract: Zinc sulfide (ZnS) nanomaterials with well-defined mesoporosity were synthesized with the assistance of sonochemistry in an ethanol system of Zn(NO3)2 and Na2S, without using any templates or surfactants. The prepared ZnS presented a crystalline structure of the cubic zinc-blende phase and possessed a high specific surface area of 263 m2 g−1 with a narrow pore size distribution around 5.1 nm. Abundant surface defects existed in the obtained mesoporous ZnS, thanks to the NaNO3 salt protection through the process of occasional precipitation in the alcohol system. Sonochemically synthesized ZnS nanomaterials showed higher activities for the photodegradation of Rhodamine B under UV light irradiation than the ones prepared in the absence of sonochemistry or in an aqueous system, which was mainly due to the well-structured mesoporosity and the surface defects.
78 citations
References
More filters
TL;DR: In this article, an upper theoretical limit for the efficiency of p−n junction solar energy converters, called the detailed balance limit of efficiency, has been calculated for an ideal case in which the only recombination mechanism of holeelectron pairs is radiative as required by the principle of detailed balance.
Abstract: In order to find an upper theoretical limit for the efficiency of p‐n junction solar energy converters, a limiting efficiency, called the detailed balance limit of efficiency, has been calculated for an ideal case in which the only recombination mechanism of hole‐electron pairs is radiative as required by the principle of detailed balance. The efficiency is also calculated for the case in which radiative recombination is only a fixed fraction fc of the total recombination, the rest being nonradiative. Efficiencies at the matched loads have been calculated with band gap and fc as parameters, the sun and cell being assumed to be blackbodies with temperatures of 6000°K and 300°K, respectively. The maximum efficiency is found to be 30% for an energy gap of 1.1 ev and fc = 1. Actual junctions do not obey the predicted current‐voltage relationship, and reasons for the difference and its relevance to efficiency are discussed.
11,071 citations
TL;DR: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects.
Abstract: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects. Some of these applications are now realized in products. Others are demonstrated in early to advanced devices, and one, hydrogen storage, is clouded by controversy. Nanotube cost, polydispersity in nanotube type, and limitations in processing and assembly methods are important barriers for some applications of single-walled nanotubes.
9,693 citations
TL;DR: In this paper, the carrier collection efficiency and energy conversion efficiency of polymer photovoltaic cells were improved by blending of the semiconducting polymer with C60 or its functionalized derivatives.
Abstract: The carrier collection efficiency (ηc) and energy conversion efficiency (ηe) of polymer photovoltaic cells were improved by blending of the semiconducting polymer with C60 or its functionalized derivatives. Composite films of poly(2-methoxy-5-(2′-ethyl-hexyloxy)-1,4-phenylene vinylene) (MEH-PPV) and fullerenes exhibit ηc of about 29 percent of electrons per photon and ηe of about 2.9 percent, efficiencies that are better by more than two orders of magnitude than those that have been achieved with devices made with pure MEH-PPV. The efficient charge separation results from photoinduced electron transfer from the MEH-PPV (as donor) to C60 (as acceptor); the high collection efficiency results from a bicontinuous network of internal donor-acceptor heterojunctions.
9,611 citations
TL;DR: In this paper, the authors describe recent progress in the theory of nanoparticle optical properties, particularly methods for solving Maxwell's equations for light scattering from particles of arbitrary shape in a complex environment.
Abstract: The optical properties of metal nanoparticles have long been of interest in physical chemistry, starting with Faraday's investigations of colloidal gold in the middle 1800s. More recently, new lithographic techniques as well as improvements to classical wet chemistry methods have made it possible to synthesize noble metal nanoparticles with a wide range of sizes, shapes, and dielectric environments. In this feature article, we describe recent progress in the theory of nanoparticle optical properties, particularly methods for solving Maxwell's equations for light scattering from particles of arbitrary shape in a complex environment. Included is a description of the qualitative features of dipole and quadrupole plasmon resonances for spherical particles; a discussion of analytical and numerical methods for calculating extinction and scattering cross-sections, local fields, and other optical properties for nonspherical particles; and a survey of applications to problems of recent interest involving triangula...
9,086 citations
TL;DR: Semiconductor nanocrystals prepared for use as fluorescent probes in biological staining and diagnostics have a narrow, tunable, symmetric emission spectrum and are photochemically stable.
Abstract: Semiconductor nanocrystals were prepared for use as fluorescent probes in biological staining and diagnostics. Compared with conventional fluorophores, the nanocrystals have a narrow, tunable, symmetric emission spectrum and are photochemically stable. The advantages of the broad, continuous excitation spectrum were demonstrated in a dual-emission, single-excitation labeling experiment on mouse fibroblasts. These nanocrystal probes are thus complementary and in some cases may be superior to existing fluorophores.
8,542 citations