Quantum Dot Solar Cells. Semiconductor Nanocrystals as Light Harvesters
18 Oct 2008-Journal of Physical Chemistry C (American Chemical Society)-Vol. 112, Iss: 48, pp 18737-18753
TL;DR: In this paper, three major ways to utilize semiconductor dots in solar cell include (i) metal−semiconductor or Schottky junction photovoltaic cell, (ii) polymer−smiconductor hybrid solar cell, and (iii) quantum dot sensitized solar cell.
Abstract: The emergence of semiconductor nanocrystals as the building blocks of nanotechnology has opened up new ways to utilize them in next generation solar cells. This paper focuses on the recent developments in the utilization of semiconductor quantum dots for light energy conversion. Three major ways to utilize semiconductor dots in solar cell include (i) metal−semiconductor or Schottky junction photovoltaic cell (ii) polymer−semiconductor hybrid solar cell, and (iii) quantum dot sensitized solar cell. Modulation of band energies through size control offers new ways to control photoresponse and photoconversion efficiency of the solar cell. Various strategies to maximize photoinduced charge separation and electron transfer processes for improving the overall efficiency of light energy conversion are discussed. Capture and transport of charge carriers within the semiconductor nanocrystal network to achieve efficient charge separation at the electrode surface remains a major challenge. Directing the future resear...
Citations
More filters
TL;DR: This work reviews the historical development of Transition metal dichalcogenides, methods for preparing atomically thin layers, their electronic and optical properties, and prospects for future advances in electronics and optoelectronics.
Abstract: Single-layer metal dichalcogenides are two-dimensional semiconductors that present strong potential for electronic and sensing applications complementary to that of graphene.
13,348 citations
TL;DR: Dye-sensitized solar cells (DSCs) offer the possibilities to design solar cells with a large flexibility in shape, color, and transparency as mentioned in this paper, and many DSC research groups have been established around the world.
Abstract: Dye-sensitized solar cells (DSCs) offer the possibilities to design solar cells with a large flexibility in shape, color, and transparency. DSC research groups have been established around the worl ...
8,707 citations
TL;DR: Nanocrystals (NCs) discussed in this Review are tiny crystals of metals, semiconductors, and magnetic material consisting of hundreds to a few thousand atoms each that are among the hottest research topics of the last decades.
Abstract: Nanocrystals (NCs) discussed in this Review are tiny crystals of metals, semiconductors, and magnetic material consisting of hundreds to a few thousand atoms each. Their size ranges from 2-3 to about 20 nm. What is special about this size regime that placed NCs among the hottest research topics of the last decades? The quantum mechanical coupling * To whom correspondence should be addressed. E-mail: dvtalapin@uchicago.edu. † The University of Chicago. ‡ Argonne National Lab. Chem. Rev. 2010, 110, 389–458 389
3,720 citations
TL;DR: In this paper, the development of different strategies to modify TiO2 for the utilization of visible light, including non metal and/or metal doping, dye sensitization and coupling semiconductors are discussed.
Abstract: Fujishima and Honda (1972) demonstrated the potential of titanium dioxide (TiO2) semiconductor materials to split water into hydrogen and oxygen in a photo-electrochemical cell. Their work triggered the development of semiconductor photocatalysis for a wide range of environmental and energy applications. One of the most significant scientific and commercial advances to date has been the development of visible light active (VLA) TiO2 photocatalytic materials. In this review, a background on TiO2 structure, properties and electronic properties in photocatalysis is presented. The development of different strategies to modify TiO2 for the utilization of visible light, including non metal and/or metal doping, dye sensitization and coupling semiconductors are discussed. Emphasis is given to the origin of visible light absorption and the reactive oxygen species generated, deduced by physicochemical and photoelectrochemical methods. Various applications of VLA TiO2, in terms of environmental remediation and in particular water treatment, disinfection and air purification, are illustrated. Comprehensive studies on the photocatalytic degradation of contaminants of emerging concern, including endocrine disrupting compounds, pharmaceuticals, pesticides, cyanotoxins and volatile organic compounds, with VLA TiO2 are discussed and compared to conventional UV-activated TiO2 nanomaterials. Recent advances in bacterial disinfection using VLA TiO2 are also reviewed. Issues concerning test protocols for real visible light activity and photocatalytic efficiencies with different light sources have been highlighted.
3,305 citations
TL;DR: In this paper, the authors discussed the steps that have led to this discovery, and the future of this rapidly advancing concept have been considered, and it is likely that the next few years of solar research will advance this technology to the very highest efficiencies while retaining the very lowest cost and embodied energy.
Abstract: Over the last 12 months, we have witnessed an unexpected breakthrough and rapid evolution in the field of emerging photovoltaics, with the realization of highly efficient solid-state hybrid solar cells based on organometal trihalide perovskite absorbers. In this Perspective, the steps that have led to this discovery are discussed, and the future of this rapidly advancing concept have been considered. It is likely that the next few years of solar research will advance this technology to the very highest efficiencies while retaining the very lowest cost and embodied energy. Provided that the stability of the perovskite-based technology can be proven, we will witness the emergence of a contender for ultimately low-cost solar power.
2,506 citations
References
More filters
592 citations
TL;DR: In this paper, a series of thiol-capped crystalline CdSe nanoparticles has been synthesized in aqueous solution using mercapto- alcohols (2-mercaptoethanol, 1-thioglycerol), and mercaptos acids (thioglobal acid, thiolactic acid) as stabilizers.
Abstract: As an expansion to the wet chemical route for the preparation of quantum-sized II−VI semiconductor materials, a series of thiol-capped crystalline CdSe nanoparticles has been synthesized in aqueous solution using mercapto- alcohols (2-mercaptoethanol, 1-thioglycerol), and mercapto acids (thioglycolic acid, thiolactic acid) as stabilizers The smaller (app 14−22 nm diameter) CdSe particles were obtained using thioalcohols as capping agents; the use of thioacids as stabilizers produced larger (21−32 nm diameter) CdSe particles CdSe nanoparticles were separated from the crude solutions as redissolvable powder samples with narrow size distributions using a size-selective fractionation and have been characterized by UV−vis absorption and photoluminescence spectroscopy, X-ray diffraction, high-resolution transmission electron microscopy, and energy-dispersive X-ray analysis A calculation of the HOMO−LUMO gap of CdSe particles as a function of their size has been done using an extended effective mass appr
564 citations
TL;DR: In this paper, a photoelectrochemical cell was formed that consisted of p-type InP QDs loaded on TiO2, which was immersed in a I-/I3- or hydroquinone/quinone acetonitrile solution, and a Pt counter electrode.
Abstract: Quantum dots (QDs) of InP strongly adsorb onto transparent, porous, nanocrystalline TiO2 electrodes prepared by sintering 200−250 A diameter TiO2 colloidal particles. The interparticle space of the TiO2 electrodes is large enough to permit deep penetration of 65-A InP QDs into the porous TiO2 film. The absorption of light increases linearly with the thickness of the TiO2 film indicating that the InP QDs are adsorbed homogeneously on the TiO2 surface. We found that large particles adsorb better than smaller ones probably due to less hindrance by the stabilizer. The solid films exhibit strong photoconductivity in the visible region indicating photosensitization of TiO2 by InP QDs. The photocurrent action spectrum of the TiO2/InP QD film at a potential of +1 V is consistent with the absorption spectrum of the InP QDs. A photoelectrochemical cell was formed that consisted of p-type InP QDs loaded on TiO2, which was immersed in a I-/I3- or hydroquinone/quinone acetonitrile solution, and a Pt counter electrode....
556 citations
TL;DR: The results presented here on the decolorization of the azo dye AO7 represents a major step forward in the development of new advanced oxidation processes for the treatment of such industrial waste.
Abstract: We present here for the first time the results from electrochemically assisted photocatalytic experiments using coupled TiO{sub 2}/SnO{sub 2} semiconductor thin films in the degradation of textile dye effluent. We show that by using such a system the oxidative efficiency of photocatalytic semiconductor systems in degrading a commercial azo dye such as Acid Orange 7 (AO7) can be improved. The results presented here on the decolorization of the azo dye AO7 represents a major step forward in the development of new advanced oxidation processes for the treatment of such industrial waste. The improved charge separation as a result of coupling two semiconductor systems with different energy levels and the applied anodic bias is responsible for the enhancement in the rate of photocatalytic degradation. 20 refs., 6 figs.
552 citations
TL;DR: In this article, the charge carrier transport and recombination in two types of thermally treated bulk-heterojunction solar cells is reviewed: in regioregular poly(3-hexylthiophene) (RRP3HT) mixed with 1-(3-methoxycarbonyl)propyl-1-phenyl-[6,6]-methanofullerene (PCBM) and in the blend of poly[2-methyl-5-(3,7-dimethyl octyloxy)-phenylene vinylene] (MD
Abstract: The charge carrier transport and recombination in two types of thermally treated bulk-heterojunction solar cells is reviewed: in regioregular poly(3-hexylthiophene) (RRP3HT) mixed with 1-(3-methoxycarbonyl)propyl-1-phenyl-[6,6]-methanofullerene (PCBM) and in the blend of poly[2-methoxy-5-(3,7-dimethyloctyloxy)-phenylene vinylene] (MDMO-PPV) mixed with PCBM. The charge carrier mobility and bimolecular recombination coefficient have been comparatively studied by using various techniques including Time-of-Flight (ToF), Charge Extraction by Linearly Increasing Voltage (CELIV), Double Injection (DI) transients, Current–Voltage (I–V) technique. It was found that the carrier mobility is at least an order of magnitude higher in RRP3HT/PCBM blends compared to MDMO-PPV/PCBM. Moreover, all used techniques demonstrate a heavily reduced charge carrier recombination in RRP3HT/PCBM films compared to Langevin-type carrier bimolecular recombination in MDMO-PPV/PCBM blends. As a result of long carrier lifetimes the formation of high carrier concentration plasma in RRP3HT/PCBM blends is demonstrated and plasma extraction methods were used to directly estimate the charge carrier mobility and bimolecular recombination coefficients simultaneously. A weak dependence of bimolecular recombination coefficient on the applied electric field and temperature demonstrates that carrier recombination is not dominated by charge carrier mobility (Langevin-type recombination) in RRP3HT/PCBM blends. Furthermore, we found from CELIV techniques that electron mobility in RRP3HT/PCBM blends is independent on relaxation time in the experimental time window (approx. hundreds of microseconds to tens of milliseconds). This reduced carrier bimolecular recombination in RRP3HT/PCBM blends implies that the much longer carrier lifetimes can be reached at the same concentrations which finally results in higher photocurrent and larger power conversion efficiency of RRP3HT/PCBM solar cells. Copyright © 2007 John Wiley & Sons, Ltd.
550 citations