Raman spectrum of graphene and graphene layers.
TL;DR: This work shows that graphene's electronic structure is captured in its Raman spectrum that clearly evolves with the number of layers, and allows unambiguous, high-throughput, nondestructive identification of graphene layers, which is critically lacking in this emerging research area.
Abstract: Graphene is the two-dimensional building block for carbon allotropes of every other dimensionality We show that its electronic structure is captured in its Raman spectrum that clearly evolves with the number of layers The D peak second order changes in shape, width, and position for an increasing number of layers, reflecting the change in the electron bands via a double resonant Raman process The G peak slightly down-shifts This allows unambiguous, high-throughput, nondestructive identification of graphene layers, which is critically lacking in this emerging research area
Citations
More filters
TL;DR: In this article, the authors examine three promising, scalable methods of graphene production, namely the graphite oxide, liquid-phase exfoliation (LPE) and electrochemical routes, with focus on their recent progress and remaining challenges.
261 citations
TL;DR: In this paper, the authors reported the first experimental study of process-induced defects and stress in graphene using Raman spectroscopy and imaging, and showed that a compressive stress (as high as 2.1 GPa) was induced in graphene by depositing a 5 nm SiO2 followed by annealing, whereas a tensile stress (~ 0.7 GPA) was obtained by inserting a thin silicon capping layer.
Abstract: Graphene has many unique properties which make it an attractive material for fundamental study as well as for potential applications. In this paper, we report the first experimental study of process-induced defects and stress in graphene using Raman spectroscopy and imaging. While defects lead to the observation of defect-related Raman bands, stress causes shift in phonon frequency. A compressive stress (as high as 2.1 GPa) was induced in graphene by depositing a 5 nm SiO2 followed by annealing, whereas a tensile stress (~ 0.7 GPa) was obtained by depositing a thin silicon capping layer. In the former case, both the magnitude of the compressive stress and number of graphene layers can be controlled or modified by the annealing temperature. As both the stress and thickness affect the physical properties of graphene, this study may open up the possibility of utilizing thickness and stress engineering to improve the performance of graphene-based devices. Local heating techniques may be used to either induce the stress or reduce the thickness selectively.
261 citations
TL;DR: In this paper, a sintered graphene nanoplatelet (GNP) was used as a reinforcing and lubricating phase in ceramic matrix composites synthesized by spark plasma sintering.
260 citations
Cites background from "Raman spectrum of graphene and grap..."
...[24] Ferrari AC, Meyer JC, Scardaci V, Casiraghi C, Lazzeri M, Piscanec S, et al....
[...]
...The intensity ratio of 2D/G peak is almost 4 for single layer graphene [24] and decreases with an increase in the number of layers [24–27]....
[...]
...Both samples show presence of 2D peak at 2700 cm (1), as reported for graphene Raman spectra at 514 nm [24]....
[...]
TL;DR: In this article, the authors demonstrate mode-locking of a thulium-doped fiber laser operating at 1.94 μm, using a graphene-polymer based saturable absorber.
Abstract: We demonstrate mode-locking of a thulium-doped fiber laser operating at 1.94 μm, using a graphene-polymer based saturable absorber. The laser outputs 3.6 ps pulses, with ~0.4 nJ energy and an amplitude fluctuation ~0.5%, at 6.46 MHz. This is a simple, low-cost, stable and convenient laser oscillator for applications where eye-safe and low-photon-energy light sources are required, such as sensing and biomedical diagnostics.
259 citations
TL;DR: Graphene microflowers with highly porous structure for high-performance MA filler material show outstanding MA performance with the aid of rational microstructure design and exhibit advantages in facile processibility and large-scale production compared with other porous graphene materials including aerogels and foams.
Abstract: Graphene has shown great potential in microwave absorption (MA) owing to its high surface area, low density, tunable electrical conductivity and good chemical stability. To fully realize grapheneʼs MA ability, the microstructure of graphene should be carefully addressed. Here we prepared graphene microflowers (Gmfs) with highly porous structure for high-performance MA filler material. The efficient absorption bandwidth (reflection loss ≤ −10 dB) reaches 5.59 GHz and the minimum reflection loss is up to −42.9 dB, showing significant increment compared with stacked graphene. Such performance is higher than most graphene-based materials in the literature. Besides, the low filling content (10 wt%) and low density (40–50 mg cm−3) are beneficial for the practical applications. Without compounding with magnetic materials or conductive polymers, Gmfs show outstanding MA performance with the aid of rational microstructure design. Furthermore, Gmfs exhibit advantages in facile processibility and large-scale production compared with other porous graphene materials including aerogels and foams.
259 citations
References
More filters
28 Jul 2005
TL;DR: PfPMP1）与感染红细胞、树突状组胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作�ly.
Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。
18,940 citations