Recent Applications of RNA Sequencing in Food and Agriculture
29 Apr 2021-
TL;DR: This chapter introduces RNA-Seq and surveys its recent food and agriculture applications, ranging from differential gene expression, variants calling and detection, allele-specific expression, alternative splicing, alternative polyadenylation site usage, microRNA profiling, circular RNAs, single-cell RNA- Seq, metatranscriptomics, and systems biology.
Abstract: RNA sequencing (RNA-Seq) is the leading, routine, high-throughput, and cost-effective next-generation sequencing (NGS) approach for mapping and quantifying transcriptomes, and determining the transcriptional structure. The transcriptome is a complete collection of transcripts found in a cell or tissue or organism at a given time point or specific developmental or environmental or physiological condition. The emergence and evolution of RNA-Seq chemistries have changed the landscape and the pace of transcriptome research in life sciences over a decade. This chapter introduces RNA-Seq and surveys its recent food and agriculture applications, ranging from differential gene expression, variants calling and detection, allele-specific expression, alternative splicing, alternative polyadenylation site usage, microRNA profiling, circular RNAs, single-cell RNA-Seq, metatranscriptomics, and systems biology. A few popular RNA-Seq databases and analysis tools are also presented for each application. We began to witness the broader impacts of RNA-Seq in addressing complex biological questions in food and agriculture.
Citations
More filters
TL;DR: In this article , the authors obtained transcriptome profiling data using the Gentiana triflora cultivar ‘Maciry’, which typically flowers in late July, and conducted deep RNA sequencing analysis using gentian plants grown under natural field conditions for three months before flowering.
Abstract: Japanese cultivated gentians are perennial plants that flower in early summer to late autumn in Japan, depending on the cultivar. Several flowering-related genes, including GtFT1 and GtTFL1, are known to be involved in regulating flowering time, but many such genes remain unidentified. In this study, we obtained transcriptome profiling data using the Gentiana triflora cultivar ‘Maciry’, which typically flowers in late July. We conducted deep RNA sequencing analysis using gentian plants grown under natural field conditions for three months before flowering. To investigate diurnal changes, the plants were sampled at 4 h intervals over 24 h. Using these transcriptome data, we determined the expression profiles of leaves based on homology searches against the Flowering-Interactive Database of Arabidopsis. In particular, we focused on transcription factor genes, belonging to the BBX and MADS-box families, and analyzed their developmental and diurnal variation. The expression levels of representative BBX genes were also analyzed under long- and short-day conditions using in-vitro-grown seedlings, and the expression patterns of some BBX genes differed. Clustering analysis revealed that the transcription factor genes were coexpressed with GtFT1. Overall, these expression profiles will facilitate further analysis of the molecular mechanisms underlying the control of flowering time in gentians.
References
More filters
TL;DR: This work presents DESeq2, a method for differential analysis of count data, using shrinkage estimation for dispersions and fold changes to improve stability and interpretability of estimates, which enables a more quantitative analysis focused on the strength rather than the mere presence of differential expression.
Abstract: In comparative high-throughput sequencing assays, a fundamental task is the analysis of count data, such as read counts per gene in RNA-seq, for evidence of systematic changes across experimental conditions. Small replicate numbers, discreteness, large dynamic range and the presence of outliers require a suitable statistical approach. We present DESeq2, a method for differential analysis of count data, using shrinkage estimation for dispersions and fold changes to improve stability and interpretability of estimates. This enables a more quantitative analysis focused on the strength rather than the mere presence of differential expression. The DESeq2 package is available at http://www.bioconductor.org/packages/release/bioc/html/DESeq2.html
.
47,038 citations
TL;DR: The philosophy and design of the limma package is reviewed, summarizing both new and historical features, with an emphasis on recent enhancements and features that have not been previously described.
Abstract: limma is an R/Bioconductor software package that provides an integrated solution for analysing data from gene expression experiments. It contains rich features for handling complex experimental designs and for information borrowing to overcome the problem of small sample sizes. Over the past decade, limma has been a popular choice for gene discovery through differential expression analyses of microarray and high-throughput PCR data. The package contains particularly strong facilities for reading, normalizing and exploring such data. Recently, the capabilities of limma have been significantly expanded in two important directions. First, the package can now perform both differential expression and differential splicing analyses of RNA sequencing (RNA-seq) data. All the downstream analysis tools previously restricted to microarray data are now available for RNA-seq as well. These capabilities allow users to analyse both RNA-seq and microarray data with very similar pipelines. Second, the package is now able to go past the traditional gene-wise expression analyses in a variety of ways, analysing expression profiles in terms of co-regulated sets of genes or in terms of higher-order expression signatures. This provides enhanced possibilities for biological interpretation of gene expression differences. This article reviews the philosophy and design of the limma package, summarizing both new and historical features, with an emphasis on recent enhancements and features that have not been previously described.
22,147 citations
TL;DR: The RNA-Seq approach to transcriptome profiling that uses deep-sequencing technologies provides a far more precise measurement of levels of transcripts and their isoforms than other methods.
Abstract: RNA-Seq is a recently developed approach to transcriptome profiling that uses deep-sequencing technologies. Studies using this method have already altered our view of the extent and complexity of eukaryotic transcriptomes. RNA-Seq also provides a far more precise measurement of levels of transcripts and their isoforms than other methods. This article describes the RNA-Seq approach, the challenges associated with its application, and the advances made so far in characterizing several eukaryote transcriptomes.
11,528 citations
Northern Arizona University1, National Institutes of Health2, University of Minnesota3, University of California, Davis4, Woods Hole Oceanographic Institution5, Massachusetts Institute of Technology6, University of Copenhagen7, University of Trento8, Chinese Academy of Sciences9, University of California, San Francisco10, University of Pennsylvania11, Pacific Northwest National Laboratory12, North Carolina State University13, University of California, San Diego14, Institute for Systems Biology15, Dalhousie University16, University of British Columbia17, Statens Serum Institut18, Anschutz Medical Campus19, University of Washington20, Michigan State University21, Stanford University22, Harvard University23, Broad Institute24, Australian National University25, University of Düsseldorf26, University of New South Wales27, Sookmyung Women's University28, San Diego State University29, Howard Hughes Medical Institute30, Cornell University31, Max Planck Society32, Colorado State University33, Google34, Syracuse University35, Webster University36, United States Department of Agriculture37, University of Arkansas for Medical Sciences38, Colorado School of Mines39, University of Southern Mississippi40, National Oceanic and Atmospheric Administration41, University of California, Merced42, Wageningen University and Research Centre43, University of Arizona44, Environment Agency45, University of Florida46, Merck & Co.47
TL;DR: QIIME 2 development was primarily funded by NSF Awards 1565100 to J.G.C. and R.K.P. and partial support was also provided by the following: grants NIH U54CA143925 and U54MD012388.
Abstract: QIIME 2 development was primarily funded by NSF Awards 1565100 to J.G.C. and 1565057 to R.K. Partial support was also provided by the following: grants NIH U54CA143925 (J.G.C. and T.P.) and U54MD012388 (J.G.C. and T.P.); grants from the Alfred P. Sloan Foundation (J.G.C. and R.K.); ERCSTG project MetaPG (N.S.); the Strategic Priority Research Program of the Chinese Academy of Sciences QYZDB-SSW-SMC021 (Y.B.); the Australian National Health and Medical Research Council APP1085372 (G.A.H., J.G.C., Von Bing Yap and R.K.); the Natural Sciences and Engineering Research Council (NSERC) to D.L.G.; and the State of Arizona Technology and Research Initiative Fund (TRIF), administered by the Arizona Board of Regents, through Northern Arizona University. All NCI coauthors were supported by the Intramural Research Program of the National Cancer Institute. S.M.G. and C. Diener were supported by the Washington Research Foundation Distinguished Investigator Award.
8,821 citations
TL;DR: It is shown that recently reported non-canonical sites do not mediate repression despite binding the miRNA, which indicates that the vast majority of functional sites are canonical.
Abstract: Proteins are built by using the information contained in molecules of messenger RNA (mRNA). Cells have several ways of controlling the amounts of different proteins they make. For example, a so-called ‘microRNA’ molecule can bind to an mRNA molecule to cause it to be more rapidly degraded and less efficiently used, thereby reducing the amount of protein built from that mRNA. Indeed, microRNAs are thought to help control the amount of protein made from most human genes, and biologists are working to predict the amount of control imparted by each microRNA on each of its mRNA targets. All RNA molecules are made up of a sequence of bases, each commonly known by a single letter—‘A’, ‘U’, ‘C’ or ‘G’. These bases can each pair up with one specific other base—‘A’ pairs with ‘U’, and ‘C’ pairs with ‘G’. To direct the repression of an mRNA molecule, a region of the microRNA known as a ‘seed’ binds to a complementary sequence in the target mRNA. ‘Canonical sites’ are regions in the mRNA that contain the exact sequence of partner bases for the bases in the microRNA seed. Some canonical sites are more effective at mRNA control than others. ‘Non-canonical sites’ also exist in which the pairing between the microRNA seed and mRNA does not completely match. Previous work has suggested that many non-canonical sites can also control mRNA degradation and usage. Agarwal et al. first used large experimental datasets from many sources to investigate microRNA activity in more detail. As expected, when mRNAs had canonical sites that matched the microRNA, mRNA levels and usage tended to drop. However, no effect was observed when the mRNAs only had recently identified non-canonical sites. This suggests that microRNAs primarily bind to canonical sites to control protein production. Based on these results, Agarwal et al. further developed a statistical model that predicts the effects of microRNAs binding to canonical sites. The updated model considers 14 different features of the microRNA, microRNA site, or mRNA—including the mRNA sequence around the site—to predict which sites within mRNAs are most effectively targeted by microRNAs. Tests showed that Agarwal et al.'s model was as good as experimental approaches at identifying the effective target sites, and was better than existing computational models. The model has been used to power the latest version of a freely available resource called TargetScan, and so could prove a valuable resource for researchers investigating the many important roles of microRNAs in controlling protein production.
5,365 citations