Recent progress in fiber-optic extrinsic Fabry–Perot interferometric sensors
TL;DR: In this article, the optical amplification technology is adopted into the EFPI sensor system to enhance the interferometric signal considerably, and both spatial-frequency multiplexing and coarse-wavelength division multiple-xing technologies are demonstrated for the Fizeau sensor in order to realize the measurement of multiple parameters such as displacement, transverse load, static strain, temperature, and vibration.
About: This article is published in Optical Fiber Technology.The article was published on 2006-07-01. It has received 356 citations till now.
Citations
More filters
TL;DR: Each type of interferometric sensor is reviewed in terms of operating principles, fabrication methods, and application fields and some specific examples of recently reported interferometeric sensor technologies are presented in detail to show their large potential in practical applications.
Abstract: Fiber optic interferometers to sense various physical parameters including temperature, strain, pressure, and refractive index have been widely investigated. They can be categorized into four types: Fabry-Perot, Mach-Zehnder, Michelson, and Sagnac. In this paper, each type of interferometric sensor is reviewed in terms of operating principles, fabrication methods, and application fields. Some specific examples of recently reported interferometeric sensor technologies are presented in detail to show their large potential in practical applications. Some of the simple to fabricate but exceedingly effective Fabry-Perot interferometers, implemented in both extrinsic and intrinsic structures, are discussed. Also, a wide variety of Mach-Zehnder and Michelson interferometric sensors based on photonic crystal fibers are introduced along with their remarkable sensing performances. Finally, the simultaneous multi-parameter sensing capability of a pair of long period fiber grating (LPG) is presented in two types of structures; one is the Mach-Zehnder interferometer formed in a double cladding fiber and the other is the highly sensitive Sagnac interferometer cascaded with an LPG pair.
524 citations
Cites background from "Recent progress in fiber-optic extr..."
...Indeed, some fiber optic sensors are used for real time deformation monitoring of aircrafts, ships, bridges, and constructions [17]....
[...]
...The extrinsic FPI sensor uses the reflections from an external cavity formed out of the interesting fiber [17]....
[...]
TL;DR: Recent research and applications in structural health monitoring of composite aircraft structures using FOS have been critically reviewed, considering both the multi-point and distributed sensing techniques.
Abstract: In-service structural health monitoring of composite aircraft structures plays a key role in the assessment of their performance and integrity. In recent years, Fibre Optic Sensors (FOS) have proved to be a potentially excellent technique for real-time in-situ monitoring of these structures due to their numerous advantages, such as immunity to electromagnetic interference, small size, light weight, durability, and high bandwidth, which allows a great number of sensors to operate in the same system, and the possibility to be integrated within the material. However, more effort is still needed to bring the technology to a fully mature readiness level. In this paper, recent research and applications in structural health monitoring of composite aircraft structures using FOS have been critically reviewed, considering both the multi-point and distributed sensing techniques.
461 citations
Cites background from "Recent progress in fiber-optic extr..."
...Fabry-Perot sensors [21,22] can attain a resolution as high as 0....
[...]
TL;DR: The miniaturized fiber inline Fabry-Perot interferometer, with an open micro-notch cavity fabricated by one-step fs laser micromachining, is reported for highly sensitive refractive index measurement.
Abstract: We report a miniaturized fiber inline Fabry-Perot interferometer (FPI), with an open micro-notch cavity fabricated by one-step fs laser micromachining, for highly sensitive refractive index measurement. The device was tested for measurement of the refractive indices of various liquids including isopropanol, acetone and methanol at room temperature, as well as the temperature-dependent refractive index of deionized water from 3 to 90 degrees C. The sensitivity for measurement of refractive index change of water was 1163 nm/RIU at the wavelength of 1550 nm. The temperature cross-sensitivity of the device was about 1.1x10(-6) RIU/degrees C. The small size, all-fiber structure, small temperature dependence, linear response and high sensitivity, make the device attractive for chemical and biological sensing.
395 citations
TL;DR: A miniature Fabry-Perot (FP) interferometric fiber-optic sensor suitable for high-temperature sensing is proposed and demonstrated and shows that the thermal-optics effect of the cavity material is much more appreciable than its thermal expansion.
Abstract: A miniature Fabry-Perot (FP) interferometric fiber-optic sensor suitable for high-temperature sensing is proposed and demonstrated. The sensor head consists of two FP cavities formed by fusion splicing a short hollow-core fiber and a piece of single-mode fiber at a photonic crystal fiber in series. The reflection spectra of an implemented sensor are measured at several temperatures and analyzed in the spatial frequency domain. The experiment shows that the thermal-optic effect of the cavity material is much more appreciable than its thermal expansion. The temperature measurements up to 1000 degrees C with a step of 50 degrees C confirm that it could be applicable as a high-temperature sensor.
340 citations
TL;DR: Experimental results showed that the liquid refractive index information can be simultaneously provided from measuring the sensitivity of the liquid level and from employing a multimode fiber as a mode coupler in the thinned fiber based Mach-Zehnder interferometer.
Abstract: We propose and demonstrate a thinned fiber based Mach-Zehnder interferometer for multi-purpose sensing applications. The sensor head is formed by all-fiber in-line singlemode-multimode-thinned-singlemode (SMTS) fiber structure, only using the splicing method. The principle of operation relies on the effect that the thinned fiber cladding modes interference with the core mode by employing a multimode fiber as a mode coupler. Experimental results showed that the liquid refractive index information can be simultaneously provided from measuring the sensitivity of the liquid level. A 9.00 mm long thinned fiber sensor at a wavelength of 1538.7228 nm exhibits a water level sensitivity of -175.8 pm/mm, and refractive index sensitivity as high as -1868.42 (pm/mm)/RIU, respectively. The measuring method is novel, for the first time to our knowledge. In addition, it also demonstrates that by monitoring the wavelength shift, the sensor at a wavelength of 1566.4785 nm exhibits a refractive index sensitivity of -25.2935 nm/RIU, temperature sensitivity of 0.0615 nm/°C, and axial strain sensitivity of -2.99 pm/μe, respectively. Moreover, the sensor fabrication process is very simple and cost effective.
312 citations
References
More filters
TL;DR: In-fibre Bragg grating (FBG) sensors are one of the most exciting developments in the field of optical fiber sensors in recent years as discussed by the authors, and significant progress has been made in applications to strain and temperature measurements.
Abstract: In-fibre Bragg grating (FBG) sensors are one of the most exciting developments in the field of optical fibre sensors in recent years. Compared with conventional fibre-optic sensors, FBG sensors have a number of distinguishing advantages. Significant progress has been made in applications to strain and temperature measurements. FBG sensors prove to be one of the most promising candidates for fibre-optic smart structures. This article presents a comprehensive and systematic overview of FBG sensor technology regarding many aspects including sensing principles, properties, fabrication, interrogation and multiplexing of FBG sensors. It is anticipated that FBG sensor systems will be commercialized and widely applied in practice in the near future due to the maturity of economical production of FBGs and the availability of cost effective interrogation and multiplexing techniques.
1,170 citations
TL;DR: A signal enhancement algorithm is developed that seeks to recover a signal from noise-contaminated distorted measurements made on that signal by utilizing a set of properties which the signal is known or is hypothesized as possessing.
Abstract: A signal enhancement algorithm is developed that seeks to recover a signal from noise-contaminated distorted measurements made on that signal. This object is achieved by utilizing a set of properties which the signal is known or is hypothesized as possessing. The measured signal is modified to the smallest degree necessary to sequentially possess each of the individual properties. Conditions for the algorithm's convergence are established in which the primary requirement is that a composite property mapping be closed. This is a relatively unrestricted condition in comparison to that required of most existing signal-enhancement algorithms. >
703 citations
[...]
TL;DR: Fiber optic sensors have become indispensable tools for biomedical study because of their unique features such as high sensitivity, small footprint and endoscopic compatibility, multiple agent distributive sensing capability, and immunity from electromagnetic interference as discussed by the authors.
Abstract: Fiber optic sensors have become indispensable tools for biomedical study because of their unique features such as (1) high sensitivity, (2) small footprint and endoscopic compatibility, (3) multiple agent distributive sensing capability, and (4) immunity from electromagnetic interference. In this chapter, we will provide a brief overview on the basic principle of fiber optic sensors, types of fiber optic sensors, and their applications to biomedical sensing. As a result of the page limitation, important work in this area may not be included in this chapter. Readers may find those contents in the listed reference material.
Keywords:
fiber optic sensors;
light;
sensing mechanism;
biomedical sensing
594 citations
01 Jun 1996
TL;DR: Fiber optic sensor technology has experienced tremendous growth since its early beginnings in the 1970's with early laboratory demonstrations of fiber optic gyros and acoustic sensors and the introduction of the first commercial intensity and spectrally based sensors as mentioned in this paper.
Abstract: Fiber optic sensor technology has experienced tremendous growth since its early beginnings in the 1970's with early laboratory demonstrations of fiber optic gyros and acoustic sensors and the introduction of the first commercial intensity and spectrally based sensors. These early efforts were followed by a tremendous growth of interest in the 1980's when the number of workers in the field increased from perhaps a few hundred to thousands. The result was the introduction in the 1990's of the first mass produced fiber optic sensors that are being used to support navigation and medical applications. The number of fiber optic sensor products can be expected to grow tremendously in the years to come as rapid progress continues to be made in the related optoelectronic and communication fields. This paper provides an overview of some of the technologies being used to support fiber optic sensor development and how they are being applied.
435 citations
TL;DR: In this paper, a novel long-period fiber grating (LPFG) fabricated by using a new writing technique that is mainly based on the thermal shock effect of focused high-frequency CO/sub 2/ laser pulses at several kilohertz was reported.
Abstract: In this paper, we report a novel long-period fiber grating (LPFG) fabricated by using a new writing technique that is mainly based on the thermal shock effect of focused high-frequency CO/sub 2/ laser pulses at several kilohertz. A number of unique characteristics of such a LPFG, such as bend, torsion, and transverse load, are observed by experiments, for the first time, to our knowledge. Based on these unique features, a novel bend-insensitive LPFG sensor that could solve the problem of cross-sensitivity between bend and other measurands, a novel torsion sensor that can realize absolute measurement of twist rate, and a load sensor that can achieve simultaneous measurement of transverse load and temperature using a single LPFG element are proposed and demonstrated. These unique features of the LPFGs are mainly due to the asymmetrical distribution of the refractive index on the cross section of the LPFG induced by high-frequency CO/sub 2/ laser pulses.
384 citations