scispace - formally typeset
Search or ask a question
DOI

Recent Progress in the Transfer of Graphene Films and Nanostructures

05 Nov 2021-pp 2100771
About: The article was published on 2021-11-05 and is currently open access. It has received 12 citations till now. The article focuses on the topics: Graphene & Chemical vapor deposition.
Citations
More filters
Journal ArticleDOI
TL;DR: In this article , a new laser processing method, combining the in situ graphitization of polyimide with simultaneous transfer of the graphene patterns to arbitrary substrates, was reported. But the method was applied to the fabrication of hybrid supercapacitors, which exhibited very good electrochemical performance.
Abstract: In this article we report a new laser processing method, combining the in situ graphitization of polyimide with simultaneous transfer of the graphene patterns to arbitrary substrates. The synthesis conditions are similar to those normally used for the well-known laser-induced graphene method. The approach is based on the enclosure of polyimide sheets between microscope glass slides. Graphene patterns have been successfully generated on glass and on PDMS, as well as graphene decorated with metals and oxides. In order to illustrate the usefulness of the proposed approach, the method was applied to the fabrication of hybrid supercapacitors, which exhibited very good electrochemical performance.

34 citations

Journal ArticleDOI
TL;DR: In this paper , the critical aspects of structural design and fabrication of nanocarbon materials for extreme environments are reviewed, including a description of the underlying mechanism supporting the performance of carbon nanotubes (CNTs) against extreme environments, the principles of structural designs for the optimization of extreme environmental performances, and the fabrication processes developed for the realization of specific extreme environmental applications.
Abstract: Extreme environments represent numerous harsh environmental conditions, such as temperature, pressure, corrosion, and radiation. The tolerance of applications in extreme environments exemplifies significant challenges to both materials and their structures. Given the superior mechanical strength, electrical conductivity, thermal stability, and chemical stability of nanocarbon materials, such as carbon nanotubes (CNTs) and graphene, they are widely investigated as base materials for extreme environmental applications and have shown numerous breakthroughs in the fields of wide‐temperature structural‐material construction, low‐temperature energy storage, underwater sensing, and electronics operated at high temperatures. Here, the critical aspects of structural design and fabrication of nanocarbon materials for extreme environments are reviewed, including a description of the underlying mechanism supporting the performance of nanocarbon materials against extreme environments, the principles of structural design of nanocarbon materials for the optimization of extreme environmental performances, and the fabrication processes developed for the realization of specific extreme environmental applications. Finally, perspectives on how CNTs and graphene can further contribute to the development of extreme environmental applications are presented.

8 citations

Journal ArticleDOI
TL;DR: Graphene is a two-dimensional material with extraordinary optical, thermal, mechanical, and electrical properties as mentioned in this paper , which has a versatile surface chemistry and large surface area, and has been used extensively in environmental applications.
Abstract: Graphene is fundamentally a two-dimensional material with extraordinary optical, thermal, mechanical, and electrical characteristics. It has a versatile surface chemistry and large surface area. It is a carbon nanomaterial, which comprises sp2 hybridized carbon atoms placed in a hexagonal lattice with one-atom thickness, giving it a two-dimensional structure. A large number of synthesis techniques including epitaxial growth, liquid phase exfoliation, electrochemical exfoliation, mechanical exfoliation, and chemical vapor deposition are used for the synthesis of graphene. Graphene prepared using different techniques can have a number of benefits and deficiencies depending on its application. This study provides a summary of graphene preparation techniques and critically assesses the use of graphene, its derivates, and composites in environmental applications. These applications include the use of graphene as membrane material for the detoxication and purification of water, active material for gas sensing, heavy metal ions detection, and CO2 conversion. Furthermore, a trend analysis of both synthesis techniques and environmental applications of graphene has been performed by extracting and analyzing Scopus data from the past ten years. Finally, conclusions and outlook are provided to address the residual challenges related to the synthesis of the material and its use for environmental applications.

6 citations

Journal ArticleDOI
TL;DR: In this paper , an optical-thermally actuated multi-layer graphene resonator for humidity sensing is presented, which has an up to 350 Hz/%RH humidity sensitivity in the range of 0-100% RH at 25 °C.
Abstract: This paper demonstrates an optical-thermally actuated multi-layer graphene resonator for humidity sensing. A ~10-layered graphene resonator with a diameter of 125 μm peripherally clamped on the fiber ferrule end face was actuated to vibrate using the intensity-modulated laser, and the vibration was detected based on the optical fiber Fabry-Perot interference method. The humidity sensing experiment exhibited an up to 350 Hz/%RH humidity sensitivity in the range of 0-100% RH at 25 °C, which was 10 times higher than those of the previously reported Quartz Crystal Microbalance (QCM)-based humidity sensors. Also, a good repeatability of the frequency-humidity response was observed for the presented graphene resonator. Moreover, in view of the coupling effect of temperature on the graphene resonator, the temperature drift of 0.942 kHz/°C was measured in the range of 25-50 °C, thereby inducing an absolute humidity error of about 0.6 g/(m 3 ·°C). • Micro fiber-optic graphene resonators are fabricated and used for humidity sensing innovatively. • Graphene resonators exhibit a much higher humidity sensitivity of 350 Hz/%RH compared with the Quartz Crystal Microbalance. • The humidity response of the graphene resonators shows the good linearity and stability at atmospheric pressure.

3 citations

Journal ArticleDOI
TL;DR: In this paper , a field effect transistor (FET)-based biosensor was developed using ultraclean graphene and an aptamer for ultrasound sensitive tetracycline detection, which achieved a dynamic detection range of 5 orders of magnitude, a sensitivity of 21.7 mV/decade, and a low detection limit of 100 fM.
Abstract: Antibiotics are powerful tools to treat bacterial infections, but antibiotic pollution is becoming a severe threat to the effective treatment of human bacterial infections. The detection of antibiotics in water has been a crucial research area for bioassays in recent years. There is still an urgent need for a simple ultrasensitive detection approach to achieve accurate antibiotic detection at low concentrations. Herein, a field-effect transistor (FET)-based biosensor was developed using ultraclean graphene and an aptamer for ultrasensitive tetracycline detection. Using a newly designed camphor-rosin clean transfer (CRCT) scheme to prepare ultraclean graphene, the carrier mobility of the FET is found to be improved by more than 10 times compared with the FET prepared by the conventional PMMA transfer (CPT) method. Based on the FET, aptamer-functionalized transistor antibiotic biosensors were constructed and characterized. A dynamic detection range of 5 orders of magnitude, a sensitivity of 21.7 mV/decade, and a low detection limit of 100 fM are achieved for the CRCT-FET biosensors with good stability, which are much improved compared with the biosensor prepared by the CPT method. The antibiotic sensing and sensing performance enhancement mechanisms for the CRCT-FET biosensor were studied and analyzed based on experimental results and a biosensing model. Finally, the CRCT-FET biosensor was verified by detecting antibiotics in actual samples obtained from the entrances of Bohai Bay.

3 citations

References
More filters
Journal ArticleDOI
22 Oct 2004-Science
TL;DR: Monocrystalline graphitic films are found to be a two-dimensional semimetal with a tiny overlap between valence and conductance bands and they exhibit a strong ambipolar electric field effect.
Abstract: We describe monocrystalline graphitic films, which are a few atoms thick but are nonetheless stable under ambient conditions, metallic, and of remarkably high quality. The films are found to be a two-dimensional semimetal with a tiny overlap between valence and conductance bands, and they exhibit a strong ambipolar electric field effect such that electrons and holes in concentrations up to 10 13 per square centimeter and with room-temperature mobilities of ∼10,000 square centimeters per volt-second can be induced by applying gate voltage.

55,532 citations

Journal ArticleDOI
Changgu Lee1, Xiaoding Wei1, Jeffrey W. Kysar1, James Hone1, James Hone2 
18 Jul 2008-Science
TL;DR: Graphene is established as the strongest material ever measured, and atomically perfect nanoscale materials can be mechanically tested to deformations well beyond the linear regime.
Abstract: We measured the elastic properties and intrinsic breaking strength of free-standing monolayer graphene membranes by nanoindentation in an atomic force microscope. The force-displacement behavior is interpreted within a framework of nonlinear elastic stress-strain response, and yields second- and third-order elastic stiffnesses of 340 newtons per meter (N m(-1)) and -690 Nm(-1), respectively. The breaking strength is 42 N m(-1) and represents the intrinsic strength of a defect-free sheet. These quantities correspond to a Young's modulus of E = 1.0 terapascals, third-order elastic stiffness of D = -2.0 terapascals, and intrinsic strength of sigma(int) = 130 gigapascals for bulk graphite. These experiments establish graphene as the strongest material ever measured, and show that atomically perfect nanoscale materials can be mechanically tested to deformations well beyond the linear regime.

18,008 citations

Journal ArticleDOI
05 Jun 2009-Science
TL;DR: It is shown that graphene grows in a self-limiting way on copper films as large-area sheets (one square centimeter) from methane through a chemical vapor deposition process, and graphene film transfer processes to arbitrary substrates showed electron mobilities as high as 4050 square centimeters per volt per second at room temperature.
Abstract: Graphene has been attracting great interest because of its distinctive band structure and physical properties. Today, graphene is limited to small sizes because it is produced mostly by exfoliating graphite. We grew large-area graphene films of the order of centimeters on copper substrates by chemical vapor deposition using methane. The films are predominantly single-layer graphene, with a small percentage (less than 5%) of the area having few layers, and are continuous across copper surface steps and grain boundaries. The low solubility of carbon in copper appears to help make this growth process self-limiting. We also developed graphene film transfer processes to arbitrary substrates, and dual-gated field-effect transistors fabricated on silicon/silicon dioxide substrates showed electron mobilities as high as 4050 square centimeters per volt per second at room temperature.

10,663 citations

Journal ArticleDOI
05 Feb 2009-Nature
TL;DR: The direct synthesis of large-scale graphene films using chemical vapour deposition on thin nickel layers is reported, and two different methods of patterning the films and transferring them to arbitrary substrates are presented, implying that the quality of graphene grown by chemical vapours is as high as mechanically cleaved graphene.
Abstract: Problems associated with large-scale pattern growth of graphene constitute one of the main obstacles to using this material in device applications. Recently, macroscopic-scale graphene films were prepared by two-dimensional assembly of graphene sheets chemically derived from graphite crystals and graphene oxides. However, the sheet resistance of these films was found to be much larger than theoretically expected values. Here we report the direct synthesis of large-scale graphene films using chemical vapour deposition on thin nickel layers, and present two different methods of patterning the films and transferring them to arbitrary substrates. The transferred graphene films show very low sheet resistance of approximately 280 Omega per square, with approximately 80 per cent optical transparency. At low temperatures, the monolayers transferred to silicon dioxide substrates show electron mobility greater than 3,700 cm(2) V(-1) s(-1) and exhibit the half-integer quantum Hall effect, implying that the quality of graphene grown by chemical vapour deposition is as high as mechanically cleaved graphene. Employing the outstanding mechanical properties of graphene, we also demonstrate the macroscopic use of these highly conducting and transparent electrodes in flexible, stretchable, foldable electronics.

10,033 citations

Journal ArticleDOI
03 Feb 2020-Nature
TL;DR: Phylogenetic and metagenomic analyses of the complete viral genome of a new coronavirus from the family Coronaviridae reveal that the virus is closely related to a group of SARS-like coronaviruses found in bats in China.
Abstract: Emerging infectious diseases, such as severe acute respiratory syndrome (SARS) and Zika virus disease, present a major threat to public health1–3. Despite intense research efforts, how, when and where new diseases appear are still a source of considerable uncertainty. A severe respiratory disease was recently reported in Wuhan, Hubei province, China. As of 25 January 2020, at least 1,975 cases had been reported since the first patient was hospitalized on 12 December 2019. Epidemiological investigations have suggested that the outbreak was associated with a seafood market in Wuhan. Here we study a single patient who was a worker at the market and who was admitted to the Central Hospital of Wuhan on 26 December 2019 while experiencing a severe respiratory syndrome that included fever, dizziness and a cough. Metagenomic RNA sequencing4 of a sample of bronchoalveolar lavage fluid from the patient identified a new RNA virus strain from the family Coronaviridae, which is designated here ‘WH-Human 1’ coronavirus (and has also been referred to as ‘2019-nCoV’). Phylogenetic analysis of the complete viral genome (29,903 nucleotides) revealed that the virus was most closely related (89.1% nucleotide similarity) to a group of SARS-like coronaviruses (genus Betacoronavirus, subgenus Sarbecovirus) that had previously been found in bats in China5. This outbreak highlights the ongoing ability of viral spill-over from animals to cause severe disease in humans. Phylogenetic and metagenomic analyses of the complete viral genome of a new coronavirus from the family Coronaviridae reveal that the virus is closely related to a group of SARS-like coronaviruses found in bats in China.

9,231 citations