Selectivity between Oxygen and Chlorine Evolution in the Chlor-Alkali and Chlorate Processes
TL;DR: This review focuses on the unwanted production of oxygen gas, which decreases the charge yield by up to 5% and summarizes the research, since the early 1900s until today, concerning the selectivity between chlorine and oxygen evolution in chlorate and chlor-alkali production.
Abstract: Chlorine gas and sodium chlorate are two base chemicals produced through electrolysis of sodium chloride brine which find uses in many areas of industrial chemistry. Although the industrial production of these chemicals started over 100 years ago, there are still factors that limit the energy efficiencies of the processes. This review focuses on the unwanted production of oxygen gas, which decreases the charge yield by up to 5%. Understanding the factors that control the rate of oxygen production requires understanding of both chemical reactions occurring in the electrolyte, as well as surface reactions occurring on the anodes. The dominant anode material used in chlorate and chlor-alkali production is the dimensionally stable anode (DSA), Ti coated by a mixed oxide of RuO2 and TiO2. Although the selectivity for chlorine evolution on DSA is high, the fundamental reasons for this high selectivity are just now becoming elucidated. This review summarizes the research, since the early 1900s until today, conce...
Citations
More filters
TL;DR: In this article, a cobalt molybdenum phosphide nanocrystal coated by a few-layer N-doped carbon shell (CoMoP@C) is used for hydrogen evolution reaction.
Abstract: The hydrogen evolution reaction (HER) based on water electrolysis is a promising strategy for hydrogen energy production, in which the key point is seeking low-cost, high efficiency and stable electrocatalysts. Currently, the most efficient electrocatalysts for the HER are Pt-based catalysts (especially commercial Pt/C), but the low abundance and high cost of Pt hinder their widespread application. Herein, we demonstrate that a cobalt molybdenum phosphide nanocrystal coated by a few-layer N-doped carbon shell (CoMoP@C) is an excellent substitute for the HER. CoMoP@C is prepared by a one-step pyrolysis method on a large scale with polyoxometalate (POM) as a molecular platform. The catalytic activity of CoMoP@C is close to that of commercial 20% Pt/C under pH = 0–1 conditions and superior to that of 20% Pt/C under pH = 2–14 conditions at high overpotential (e.g. η > 240 mV at pH = 2.2). In real seawater, CoMoP@C exhibits stable HER performance with a high Faradaic efficiency (FE) of 92.5%, while the HER activity of 20% Pt/C dramatically decreases after 4 h. The remarkable HER performance of CoMoP@C should be attributed to the low free energy of H on the central CoMoP crystalline core and the multiple functions of the outer N-doped C shell (especially the strong H+ absorption behavior). This work may provide new options for the design and preparation of promising HER electrocatalysts superior to Pt/C, which can be used directly in seawater.
559 citations
TL;DR: In this paper, the authors discuss the competition between anodic chlorine chemistry and the oxygen evolution reaction (OER) in direct and selective splitting of seawater into molecular hydrogen and oxygen.
Abstract: Hot, coastal, hyper-arid regions with intense solar irradiation and strong on- and off-shore wind patterns are ideal locations for the production of renewable electricity using wind turbines or photovoltaics. Given ample access to seawater and scarce freshwater resources, such regions make the direct and selective electrolytic splitting of seawater into molecular hydrogen and oxygen a potentially attractive technology. The key catalytic challenge consists of the competition between anodic chlorine chemistry and the oxygen evolution reaction (OER). This Perspective addresses some aspects related to direct seawater electrolyzers equipped with selective OER and hydrogen evolution reaction (HER) electrocatalysts. Starting from a historical background to the most recent achievements, it will provide insights into the current state and future perspectives of the topic. This Perspective also addresses prospects of the combination of direct seawater electrolysis with hydrogen fuel cell technology (reversible seaw...
439 citations
Journal Article•
TL;DR: This study highlights a novel, highly active oxygen evolution catalyst and provides novel important insights into the structure and performance of bimetallic oxide OER electrocatalysts in corrosive acidic environments.
Abstract: Mixed bimetallic oxides offer great opportunities for a systematic tuning of electrocatalytic activity and stability. Here, we demonstrate the power of this strategy using well-defined thermally prepared Ir–Ni mixed oxide thin film catalysts for the electrochemical oxygen evolution reaction (OER) under highly corrosive conditions such as in acidic proton exchange membrane (PEM) electrolyzers and photoelectrochemical cells (PEC). Variation of the Ir to Ni ratio resulted in a volcano type OER activity curve with an unprecedented 20-fold improvement in Ir mass-based activity over pure Ir oxide. In situ spectroscopic probing of metal dissolution indicated that, against common views, activity and stability are not directly anticorrelated. To uncover activity and stability controlling parameters, the Ir–Ni mixed thin oxide film catalysts were characterized by a wide array of spectroscopic, microscopic, scattering, and electrochemical techniques in conjunction with DFT theoretical computations. By means of an in...
429 citations
TL;DR: In this article, the challenges of water electrolysis in the presence of common impurities such as metal ions, chloride and bio-organisms are addressed through catalyst and electrolyser design.
Abstract: Powered by renewable energy sources such as solar, marine, geothermal and wind, generation of storable hydrogen fuel through water electrolysis provides a promising path towards energy sustainability. However, state-of-the-art electrolysis requires support from associated processes such as desalination of water sources, further purification of desalinated water, and transportation of water, which often contribute financial and energy costs. One strategy to avoid these operations is to develop electrolysers that are capable of operating with impure water feeds directly. Here we review recent developments in electrode materials/catalysts for water electrolysis using low-grade and saline water, a significantly more abundant resource worldwide compared to potable water. We address the associated challenges in design of electrolysers, and discuss future potential approaches that may yield highly active and selective materials for water electrolysis in the presence of common impurities such as metal ions, chloride and bio-organisms. Production of hydrogen fuel by electrolysis of low-grade or saline water, as opposed to pure water, could have benefits in terms of resource availability and cost. This Review examines the challenges of this approach and how they can be addressed through catalyst and electrolyser design.
423 citations
TL;DR: The identification of a general and tunable surface structure, coordinatively unsaturated metal cation (MCUS), as a good surface reactivity descriptor for TMOs in OER is shown.
Abstract: A number of important reactions such as the oxygen evolution reaction (OER) are catalyzed by transition metal oxides (TMOs), the surface reactivity of which is rather elusive. Therefore, rationally tailoring adsorption energy of intermediates on TMOs to achieve desirable catalytic performance still remains a great challenge. Here we show the identification of a general and tunable surface structure, coordinatively unsaturated metal cation (MCUS), as a good surface reactivity descriptor for TMOs in OER. Surface reactivity of a given TMO increases monotonically with the density of MCUS, and thus the increase in MCUS improves the catalytic activity for weak-binding TMOs but impairs that for strong-binding ones. The electronic origin of the surface reactivity can be well explained by a new model proposed in this work, wherein the energy of the highest-occupied d-states relative to the Fermi level determines the intermediates' bonding strength by affecting the filling of the antibonding states. Our model for the first time well describes the reactivity trends among TMOs, and would initiate viable design principles for, but not limited to, OER catalysts.
312 citations
References
More filters
TL;DR: In this paper, the stability of reaction intermediates of electrochemical processes on the basis of electronic structure calculations was analyzed and a detailed description of the free energy landscape of the electrochemical oxygen reduction reaction over Pt(111) as a function of applied bias was presented.
Abstract: We present a method for calculating the stability of reaction intermediates of electrochemical processes on the basis of electronic structure calculations. We used that method in combination with detailed density functional calculations to develop a detailed description of the free-energy landscape of the electrochemical oxygen reduction reaction over Pt(111) as a function of applied bias. This allowed us to identify the origin of the overpotential found for this reaction. Adsorbed oxygen and hydroxyl are found to be very stable intermediates at potentials close to equilibrium, and the calculated rate constant for the activated proton/electron transfer to adsorbed oxygen or hydroxyl can account quantitatively for the observed kinetics. On the basis of a database of calculated oxygen and hydroxyl adsorption energies, the trends in the oxygen reduction rate for a large number of different transition and noble metals can be accounted for. Alternative reaction mechanisms involving proton/electron transfer to ...
7,711 citations
TL;DR: Titanium dioxide is the most investigated single-crystalline system in the surface science of metal oxides, and the literature on rutile (1.1) and anatase surfaces is reviewed in this paper.
7,056 citations
TL;DR: The Materials Project (www.materialsproject.org) is a core program of the Materials Genome Initiative that uses high-throughput computing to uncover the properties of all known inorganic materials as discussed by the authors.
Abstract: Accelerating the discovery of advanced materials is essential for human welfare and sustainable, clean energy. In this paper, we introduce the Materials Project (www.materialsproject.org), a core program of the Materials Genome Initiative that uses high-throughput computing to uncover the properties of all known inorganic materials. This open dataset can be accessed through multiple channels for both interactive exploration and data mining. The Materials Project also seeks to create open-source platforms for developing robust, sophisticated materials analyses. Future efforts will enable users to perform ‘‘rapid-prototyping’’ of new materials in silico, and provide researchers with new avenues for cost-effective, data-driven materials design. © 2013 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution 3.0 Unported License.
6,566 citations
TL;DR: A new set of ORR electrocatalysts consisting of Pd or Pt alloyed with early transition metals such as Sc or Y, identified using density functional theory calculations as being the most stable Pt- and Pd-based binary alloys with ORR activity likely to be better than Pt.
Abstract: The widespread use of low-temperature polymer electrolyte membrane fuel cells for mobile applications will require significant reductions in the amount of expensive Pt contained within their cathodes, which drive the oxygen reduction reaction (ORR). Although progress has been made in this respect, further reductions through the development of more active and stable electrocatalysts are still necessary. Here we describe a new set of ORR electrocatalysts consisting of Pd or Pt alloyed with early transition metals such as Sc or Y. They were identified using density functional theory calculations as being the most stable Pt- and Pd-based binary alloys with ORR activity likely to be better than Pt. Electrochemical measurements show that the activity of polycrystalline Pt(3)Sc and Pt(3)Y electrodes is enhanced relative to pure Pt by a factor of 1.5-1.8 and 6-10, respectively, in the range 0.9-0.87 V.
2,588 citations
TL;DR: In this paper, density functional theory (DFT) calculations are performed to analyze the electrochemical water-splitting process producing molecular oxygen (O 2 ) and hydrogen (H 2 ).
2,063 citations