scispace - formally typeset
Open AccessJournal ArticleDOI

Sequencing technologies-the next generation

Michael L. Metzker
- 01 Jan 2010 - 
- Vol. 11, Iss: 1, pp 31-46
Reads0
Chats0
TLDR
A technical review of template preparation, sequencing and imaging, genome alignment and assembly approaches, and recent advances in current and near-term commercially available NGS instruments is presented.
Abstract
Demand has never been greater for revolutionary technologies that deliver fast, inexpensive and accurate genome information. This challenge has catalysed the development of next-generation sequencing (NGS) technologies. The inexpensive production of large volumes of sequence data is the primary advantage over conventional methods. Here, I present a technical review of template preparation, sequencing and imaging, genome alignment and assembly approaches, and recent advances in current and near-term commercially available NGS instruments. I also outline the broad range of applications for NGS technologies, in addition to providing guidelines for platform selection to address biological questions of interest.

read more

Content maybe subject to copyright    Report

TEMPLATE DESIGN © 2008
www.PosterPresentations.com
ABSTRACT
Conclusion and Future Work
Next Generation Sequencing
CONTACT INFO
Data Analysis Comparisons
Downstream Analysis
REFERENCES
DNA sequencing is one of the most important platforms for
study in biological systems today. The high-throughput-next
generation sequencing technologies delivers fast,
inexpensive, and accurate genome information. Next
generation sequencing can produce over 100 times more data
than methods based on Sanger Sequencing. The next
generation sequencing technologies offered from Illumina /
Solexa, ABI/SOLiD, 454/Roche, and Helicos has provided
unprecedented opportunity for high–throughput functional
genomic research. Next generation sequence technologies
offer novel and rapid ways for genome-wide characterization
and profiling of mRNAs, transcription factor regions, and DNA
patterns.
Fig. 7) This is a plot of the frequency of each percentage covered for all nodes.
BLAST is in blue, MUMmer is in green.
Sequencing Technologies – the Next Generation,
Micahel L. Metzkerh
Next Generation Sequencing Pipeline Development and Data Analysis
Fig. 9) This is a plot of the coverage of each Node. BLAST points are blue,
MUMmer points are red.
Fig. 6) This is a plot of the frequency of each percentage covered for all contigs.
BLAST is in blue, MUMmer is in green.
454/Roche – 454 Life Sciences is a Biotechnology company
that is a part of Roche and based in Branford, Connecticut.
The center develops ultra-fast high-throughput DNA
sequencing methods and tools.
Illumina/Solexa– Illumina is a company that develops and
manufactures integrated systems for the analysis of gene
variation. Solexa was founded to develop genome
sequencing technology.
ABI/SOLiD - (Sequencing by Oligonucleotide Ligation and
Detection) is a next-generation DNA sequencing technology
developed by Life Technologies and has been commercially
available since 2006. This next generation technology
generates hundreds of millions to billions of small sequence
reads at one time.
Helicos - Helicos's technology images the extension of
individual DNA molecules using a defined primer and
individual fluorescently labeled nucleotides, which contain a
"virtual terminator" preventing incorporation of multiple
nucleotides per cycle.
Julian Pierre
1
, Jordan Taylor
2
, Amit Upadhyay
3
, Bhanu Rekepalli
3
Fig. 8) This is a plot of the coverage of each Contig. BLAST points are blue,
MUMmer points are red.
Using the coverage of
each individual contig
ID, the results for both
BLAST and MUMmer
were plotted. While
BLAST hit more contigs,
there are more contigs
with a higher coverage
that were hit by
MUMmer.
Using the data gathered
from both BLAST and
MUMmer, the frequency
of the amount covered
for each contig was
plotted. From Fig 6), it
can be inferred that
MUMmer hit more
accurately for contigs.
Fig 4) from main.g2.bx.psu.edu
Once the results were found using both the BLAST and
MUMmer search tools, we created a program to see which
sequencing tool had the most hits per contig. The total
number of contigs in the database file is 160,749 and the
total number of nodes in the query file is 552,305. BLAST
returned a total of 123,070 hits and MUMmer returned a
total of 121,829 hits. From the results, MUMmer hit more
accurately than BLAST while BLAST hit more contigs than
MUMmer.
In Next-Generation Sequencing, data analysis is one of the
most expensive processes. While the cost of genome
sequencing goes down, the cost of analyzing data is still
expensive. In the future, the “$1,000 genome will come with
a $20,000 analysis price tag.”
The same process was
done with the Nodes.
From Fig 7), it can be
inferred that BLAST hit
more accurately with
nodes. However, there
are more BLAST results
with lower coverage.
The future of next generation sequencing can be broken
down into a variety of categories such as personalized
medicine, bio fuels, climate change, and other life science
fields.
Personalized Medicine is a medical model that proposes
the customization of medical decision to tailor an
individual
Bio Fuels present a source of alternative energy.
Microalgal biofuels use algae to synthesize the fuel. In
order to optimize the process, an understanding of the
gene-function relationship of algae would prove helpful.
Climate change is the active study of past and future
theoretical models which uses the past climate data to
make future projections.
In conclusion, we hope to contribute the knowledge we
have gained to contribute to fields such as these.
The same process was
done with the Nodes.
While BLAST hit more
Nodes, there are more
Nodes that hit with a
lower coverage using
BLAST.
1 Texas Southern University, 2 Austin Peay State University, 3 University of Tennessee
Next Gen Sequencing uses a wide array of tools to obtain results based
on the genome sequence. The most widely used Tools are BLAST,
HMMER, and MUMmer.
BLAST (Basic Local Alignment Search Tool) is a multi-sequence
alignment tool developed by NIH (National Institute of Health). It is
used find similar regions in different sequences and then compare
their similarities.
MUMmer (Maximum Unique Matches) is a rapid alignment system
used for rapidly aligning entire genomes. It can also align incomplete
genomes and can easily handle 1000’s of contigs from a shotgun
sequencing project.
HMMER (Hidden Markov Modeler) is used for searching sequence
databases for homologs of protein sequences, and for making protein
sequence alignments. It implements methods using probabilistic
models called profile hidden Markov models (HMMs)
Genome Assembly
Sequence Analysis refers to
the process of subjecting a
DNA, RNA or peptide
sequence to a wide range of
analytical methods to:
Compare sequences to find
similarities and infer if they
are Homologous
To identify the features of
the sequence such as gene
structure, distribution,
introns and exons, and
regulation of gene
expression
Identify Sequence
differences and variations
such as mutations
Fig. 1) This is figure shows three different Next Generation Sequencing methods. [2]
Fig. 2) Taken from A Hitchhiker’s Guide to Next-Generation Sequencing, by Gabe Rudy
Fig. 3) Taken from bio.davidson.edu/courses. Shows alignment results for yeast.
Fig 5) from jcvi.org shows the mapping of chr6 of a Human Genome
Julian Pierre – julz_pierre@yahoo.com
Jordan Taylor – jtaylor74@my.apsu.edu
Amit Upadhyay – aupadhy1@utk.edu
Bhanu Rekepalli – brekapal@utk.edu
http://www.roche.com/research_and_development/r_d_overview/
r_d_sites.htm?id=18
http://www.pnas.org/content/99/6/3712/F1.expansion.html
http://www.yerkes.emory.edu/nhp_genomics_core/Services/
Sequencing.html
http://www.illumina.com/technology/solexa_technology.ilmn
http://blast.ncbi.nlm.nih.gov/Blast.cgi
https://main.g2.bx.psu.edu/u/dan/p/fastq
http://ori.dhhs.gov/education/products/n_illinois_u/datamanagement/
datopic.htmll
http://www.jcvi.org/medicago/include/images/chr6.BamHI.maps.jpg
Gabe Rudy, (2010) A Hitchhikers Guide to Next-Generation
Sequencing, :1-9, Golden Helix
[1] John D. McPherson, (2009) Next-Generation Gap, 6:1-4, Nature
Methods Supplement
[2]Michael L. Metzker, (2010) Sequencing Technologies, - the next
generation, 11:1-5, Nature Reviews
Md. Fakruddin,Khanjada Shahnewaj Bin mannan, (2012) Next
Generation sequencing technologies – Principles and prospects,
6:1-9, Research and Reviews in Biosciences
Misra N., Panda P. K., Parida B. K., Mishra B. K., (2012)
Phylogenomic Study of Lipid Genes Involved in Mocroalgal Biofuel
Production – Candidate Gene Mining and Metabolic Pathway
Analyses, Evolutionary Bioinformatics 8:545-564, doi: 10.4137/
EBO.S10159
Galaxy is an open, web-based
platform for data intensive
biomedical research. It can be
used on its own free public
server where you can perform,
reproduce, and share complete
analyses.
An example of how Galaxy
reflects its data is shown in Fig 5.
Two FASTA files related to the same nucleotide sequence
were input into both BLAST and MUMmer and the results
were parsed into tables. Then, the coverage of all hit contigs
and nodes from both programs was found.
Citations
More filters
Journal ArticleDOI

featureCounts: an efficient general-purpose program for assigning sequence reads to genomic features

TL;DR: FeatureCounts as discussed by the authors is a read summarization program suitable for counting reads generated from either RNA or genomic DNA sequencing experiments, which implements highly efficient chromosome hashing and feature blocking techniques.
Journal ArticleDOI

Arlequin suite ver 3.5: a new series of programs to perform population genetics analyses under Linux and Windows

TL;DR: The main innovations of the new version of the Arlequin program include enhanced outputs in XML format, the possibility to embed graphics displaying computation results directly into output files, and the implementation of a new method to detect loci under selection from genome scans.
Journal ArticleDOI

phyloseq: an R package for reproducible interactive analysis and graphics of microbiome census data.

TL;DR: The phyloseq project for R is a new open-source software package dedicated to the object-oriented representation and analysis of microbiome census data in R, which supports importing data from a variety of common formats, as well as many analysis techniques.
Journal ArticleDOI

A Robust, Simple Genotyping-by-Sequencing (GBS) Approach for High Diversity Species

TL;DR: A procedure for constructing GBS libraries based on reducing genome complexity with restriction enzymes (REs) is reported, which is simple, quick, extremely specific, highly reproducible, and may reach important regions of the genome that are inaccessible to sequence capture approaches.
References
More filters
Journal ArticleDOI

Fluorescent in situ sequencing on polymerase colonies

TL;DR: Four advances that bring us closer to sequencing genomes cost-effectively using the polony technology are presented and a polymerase trapping technique enables efficient nucleotide extension by DNA polymerase in a polyacrylamide matrix and eliminates loss of enzyme during sequencing cycles.
Journal ArticleDOI

BTA, a novel reagent for DNA attachment on glass and efficient generation of solid-phase amplified DNA colonies

TL;DR: DNA colonies generated using the BTA reagent can be used for further sequence analysis in an unprecedented parallel fashion for low-cost genomic studies and can be quantitatively processed in situ by restriction enzymes digestion.

How to map billions of short reads onto

TL;DR: In this paper, the authors map the vast quantities of short sequence fragments produced by next-generation sequencing platforms, and present a set of programs that can be used to map these fragments.
Journal ArticleDOI

De novo fragment assembly with short mate-paired reads: Does the read length matter?

TL;DR: A new tool is described, EULER-USR, for assembling mate-paired short reads and the question of whether the read length matters is analyzed, which suggests that one may extend sequencing reactions that degrade with length "past their prime" to where the error rate grows above what is normally acceptable for fragment assembly.
Journal ArticleDOI

The dynamics and time scale of ongoing genomic erosion in symbiotic bacteria

TL;DR: The results provide a general model for the stepwise process leading to genome reduction and observe a high rate of small insertions and deletions associated with abundant DNA homopolymers, and occasional larger deletions.
Related Papers (5)

Initial sequencing and analysis of the human genome.

Eric S. Lander, +248 more
- 15 Feb 2001 -