Journal Article•
Sideband cooling micromechanical motion to the quantum ground state
TL;DR: In this article, a microwave cavity optomechanical system was realized by coupling the motion of an aluminum membrane to the resonance frequency of a superconducting circuit, and damping and cooling the membrane motion with radiation pressure forces.
Abstract: Accessing the full quantum nature of a macroscopic mechanical oscillator first requires elimination of its classical, thermal motion. The flourishing field of cavity optomechanics provides a nearly ideal architecture for both preparation and detection of mechanical motion at the quantum level. We realize a microwave cavity optomechanical system by coupling the motion of an aluminum membrane to the resonance frequency of a superconducting circuit [1]. By exciting the microwave circuit below its resonance frequency, we damp and cool the membrane motion with radiation pressure forces, analogous to laser cooling of the motion of trapped ions. The microwave excitation serves not only to cool, but also to monitor the displacement of the membrane. A nearly shot-noise limited, Josephson parametric amplifier is used to detect the mechanical sidebands of this microwave excitation and quantify the thermal motion as it is cooled with radiation pressure forces to its quantum ground state [2].
Citations
More filters
TL;DR: In this article, a coupled, nanoscale optical and mechanical resonator formed in a silicon microchip is used to cool the mechanical motion down to its quantum ground state (reaching an average phonon occupancy number of 0.85±0.08).
Abstract: The simple mechanical oscillator, canonically consisting of a coupled mass–spring system, is used in a wide variety of sensitive measurements, including the detection of weak forces and small masses. On the one hand, a classical oscillator has a well-defined amplitude of motion; a quantum oscillator, on the other hand, has a lowest-energy state, or ground state, with a finite-amplitude uncertainty corresponding to zero-point motion. On the macroscopic scale of our everyday experience, owing to interactions with its highly fluctuating thermal environment a mechanical oscillator is filled with many energy quanta and its quantum nature is all but hidden. Recently, in experiments performed at temperatures of a few hundredths of a kelvin, engineered nanomechanical resonators coupled to electrical circuits have been measured to be oscillating in their quantum ground state. These experiments, in addition to providing a glimpse into the underlying quantum behaviour of mesoscopic systems consisting of billions of atoms, represent the initial steps towards the use of mechanical devices as tools for quantum metrology or as a means of coupling hybrid quantum systems. Here we report the development of a coupled, nanoscale optical and mechanical resonator formed in a silicon microchip, in which radiation pressure from a laser is used to cool the mechanical motion down to its quantum ground state (reaching an average phonon occupancy number of 0.85±0.08). This cooling is realized at an environmental temperature of 20 K, roughly one thousand times larger than in previous experiments and paves the way for optical control of mesoscale mechanical oscillators in the quantum regime.
2,073 citations
TL;DR: Hybrid quantum circuits combine two or more physical systems, with the goal of harnessing the advantages and strengths of the different systems in order to better explore new phenomena and potentially bring about novel quantum technologies as discussed by the authors.
Abstract: Hybrid quantum circuits combine two or more physical systems, with the goal of harnessing the advantages and strengths of the different systems in order to better explore new phenomena and potentially bring about novel quantum technologies. This article presents a brief overview of the progress achieved so far in the field of hybrid circuits involving atoms, spins, and solid-state devices (including superconducting and nanomechanical systems). How these circuits combine elements from atomic physics, quantum optics, condensed matter physics, and nanoscience is discussed, and different possible approaches for integrating various systems into a single circuit are presented. In particular, hybrid quantum circuits can be fabricated on a chip, facilitating their future scalability, which is crucial for building future quantum technologies, including quantum detectors, simulators, and computers.
1,439 citations
TL;DR: An object-oriented open-source framework for solving the dynamics of open quantum systems written in Python that is particularly well suited to the fields of quantum optics, superconducting circuit devices, nanomechanics, and trapped ions, while also being ideal for use in classroom instruction.
1,430 citations
TL;DR: The observation of optomechanical normal mode splitting is reported, which provides unambiguous evidence for strong coupling of cavity photons to a mechanical resonator, which paves the way towards full quantum optical control of nano- and micromechanical devices.
Abstract: Achieving coherent quantum control over massive mechanical resonators is a current research goal. Nano- and micromechanical devices can be coupled to a variety of systems, for example to single electrons by electrostatic or magnetic coupling, and to photons by radiation pressure or optical dipole forces. So far, all such experiments have operated in a regime of weak coupling, in which reversible energy exchange between the mechanical device and its coupled partner is suppressed by fast decoherence of the individual systems to their local environments. Controlled quantum experiments are in principle not possible in such a regime, but instead require strong coupling. So far, this has been demonstrated only between microscopic quantum systems, such as atoms and photons (in the context of cavity quantum electrodynamics) or solid state qubits and photons. Strong coupling is an essential requirement for the preparation of mechanical quantum states, such as squeezed or entangled states, and also for using mechanical resonators in the context of quantum information processing, for example, as quantum transducers. Here we report the observation of optomechanical normal mode splitting, which provides unambiguous evidence for strong coupling of cavity photons to a mechanical resonator. This paves the way towards full quantum optical control of nano- and micromechanical devices.
848 citations
TL;DR: The emergence of the 0-law, I- law, II-law and III-law of thermodynamics from quantum considerations is presented and it is claimed that inconsistency is the result of faulty analysis, pointing to flaws in approximations.
Abstract: Quantum thermodynamics addresses the emergence of thermodynamic laws from quantum mechanics. The viewpoint advocated is based on the intimate connection of quantum thermodynamics with the theory of open quantum systems. Quantum mechanics inserts dynamics into thermodynamics, giving a sound foundation to finite-time-thermodynamics. The emergence of the 0-law, I-law, II-law and III-law of thermodynamics from quantum considerations is presented. The emphasis is on consistency between the two theories, which address the same subject from different foundations. We claim that inconsistency is the result of faulty analysis, pointing to flaws in approximations.
815 citations
References
More filters
TL;DR: A Bose-Einstein condensate was produced in a vapor of rubidium-87 atoms that was confined by magnetic fields and evaporatively cooled and exhibited a nonthermal, anisotropic velocity distribution expected of the minimum-energy quantum state of the magnetic trap in contrast to the isotropic, thermal velocity distribution observed in the broad uncondensed fraction.
Abstract: A Bose-Einstein condensate was produced in a vapor of rubidium-87 atoms that was confined by magnetic fields and evaporatively cooled. The condensate fraction first appeared near a temperature of 170 nanokelvin and a number density of 2.5 x 10 12 per cubic centimeter and could be preserved for more than 15 seconds. Three primary signatures of Bose-Einstein condensation were seen. (i) On top of a broad thermal velocity distribution, a narrow peak appeared that was centered at zero velocity. (ii) The fraction of the atoms that were in this low-velocity peak increased abruptly as the sample temperature was lowered. (iii) The peak exhibited a nonthermal, anisotropic velocity distribution expected of the minimum-energy quantum state of the magnetic trap in contrast to the isotropic, thermal velocity distribution observed in the broad uncondensed fraction.
6,074 citations
TL;DR: This work shows that conventional cryogenic refrigeration can be used to cool a mechanical mode to its quantum ground state by using a microwave-frequency mechanical oscillator—a ‘quantum drum’—coupled to a quantum bit, which is used to measure the quantum state of the resonator.
Abstract: Quantum mechanics provides a highly accurate description of a wide variety of physical systems. However, a demonstration that quantum mechanics applies equally to macroscopic mechanical systems has been a long-standing challenge, hindered by the difficulty of cooling a mechanical mode to its quantum ground state. The temperatures required are typically far below those attainable with standard cryogenic methods, so significant effort has been devoted to developing alternative cooling techniques. Once in the ground state, quantum-limited measurements must then be demonstrated. Here, using conventional cryogenic refrigeration, we show that we can cool a mechanical mode to its quantum ground state by using a microwave-frequency mechanical oscillator—a ‘quantum drum’—coupled to a quantum bit, which is used to measure the quantum state of the resonator. We further show that we can controllably create single quantum excitations (phonons) in the resonator, thus taking the first steps to complete quantum control of a mechanical system. The bizarre, often counter-intuitive predictions of quantum mechanics have been observed in atomic-scale optical and electrical systems, but efforts to demonstrate that quantum mechanics applies equally to a mechanical system, especially one large enough to be seen with the naked eye, have proved challenging. The difficulty is cooling a mechanical system to its quantum ground state, where all classical noise is eliminated. A team at the Department of Physics at the University of California, Santa Barbara, has overcome this obstacle. Using conventional cryogenic refrigeration, they cool a mechanical resonator with a very high oscillation frequency to one-fortieth of a degree above absolute zero. This resonator, called a 'quantum drum', is coupled to a superconducting quantum bit that acts as a quantum thermometer to detect whether there are any excitations left in the resonator. When it is confirmed there are none, it is further shown that a single quantum of excitation, a phonon, can be introduced in this system and exchanged between resonator and qubit many times, thereby taking the first steps towards complete quantum control of a mechanical system. Quantum mechanics provides an accurate description of a wide variety of physical systems but it is very challenging to prove that it also applies to macroscopic (classical) mechanical systems. This is because it has been impossible to cool a mechanical mode to its quantum ground state, in which all classical noise is eliminated. Recently, various mechanical devices have been cooled to a near-ground state, but this paper demonstrates the milestone result of a piezoelectric resonator with a mechanical mode cooled to its quantum ground state.
1,800 citations
TL;DR: Recent experiments have reached a regime where the back-action of photons caused by radiation pressure can influence the optomechanical dynamics, giving rise to a host of long-anticipated phenomena.
Abstract: The coupling of optical and mechanical degrees of freedom is the underlying principle of many techniques to measure mechanical displacement, from macroscale gravitational wave detectors to microscale cantilevers used in scanning probe microscopy. Recent experiments have reached a regime where the back-action of photons caused by radiation pressure can influence the optomechanical dynamics, giving rise to a host of long-anticipated phenomena. Here we review these developments and discuss the opportunities for innovative technology as well as for fundamental science.
1,718 citations
TL;DR: In this paper, a pedagogical introduction to the physics of quantum noise and its connections to quantum measurement and quantum amplification is given, and the basics of weak continuous measurements are described.
Abstract: The topic of quantum noise has become extremely timely due to the rise of quantum information physics and the resulting interchange of ideas between the condensed matter and atomic, molecular, optical--quantum optics communities. This review gives a pedagogical introduction to the physics of quantum noise and its connections to quantum measurement and quantum amplification. After introducing quantum noise spectra and methods for their detection, the basics of weak continuous measurements are described. Particular attention is given to the treatment of the standard quantum limit on linear amplifiers and position detectors within a general linear-response framework. This approach is shown how it relates to the standard Haus-Caves quantum limit for a bosonic amplifier known in quantum optics and its application to the case of electrical circuits is illustrated, including mesoscopic detectors and resonant cavity detectors.
1,581 citations
TL;DR: Electromagnetically induced transparency in an optomechanical system whereby the coupling of a cavity to a light pulse is used to control the transmission of light through the cavity may help to allow the engineering of light storage and routing on an optical chip.
Abstract: Electromagnetically induced transparency is a quantum interference effect observed in atoms and molecules, in which the optical response of an atomic medium is controlled by an electromagnetic field. We demonstrated a form of induced transparency enabled by radiation-pressure coupling of an optical and a mechanical mode. A control optical beam tuned to a sideband transition of a micro-optomechanical system leads to destructive interference for the excitation of an intracavity probe field, inducing a tunable transparency window for the probe beam. Optomechanically induced transparency may be used for slowing and on-chip storage of light pulses via microfabricated optomechanical arrays.
1,316 citations