Silicon quantum wire array fabrication by electrochemical and chemical dissolution of wafers
TL;DR: In this paper, free standing Si quantum wires can be fabricated without the use of epitaxial deposition or lithography using electrochemical and chemical dissolution steps to define networks of isolated wires out of bulk wafers.
Abstract: Indirect evidence is presented that free‐standing Si quantum wires can be fabricated without the use of epitaxial deposition or lithography. The novel approach uses electrochemical and chemical dissolution steps to define networks of isolated wires out of bulk wafers. Mesoporous Si layers of high porosity exhibit visible (red) photoluminescence at room temperature, observable with the naked eye under <1 mW unfocused (<0.1 W cm−2) green or blue laser line excitation. This is attributed to dramatic two‐dimensional quantum size effects which can produce emission far above the band gap of bulk crystalline Si.
Citations
More filters
TL;DR: In this article, the authors focus on the properties of quantum dots and their ability to join the dots into complex assemblies creates many opportunities for scientific discovery, such as the ability of joining the dots to complex assemblies.
Abstract: Current research into semiconductor clusters is focused on the properties of quantum dots-fragments of semiconductor consisting of hundreds to many thousands of atoms-with the bulk bonding geometry and with surface states eliminated by enclosure in a material that has a larger band gap. Quantum dots exhibit strongly size-dependent optical and electrical properties. The ability to join the dots into complex assemblies creates many opportunities for scientific discovery.
10,737 citations
TL;DR: Dye-sensitized solar cells (DSCs) offer the possibilities to design solar cells with a large flexibility in shape, color, and transparency as mentioned in this paper, and many DSC research groups have been established around the world.
Abstract: Dye-sensitized solar cells (DSCs) offer the possibilities to design solar cells with a large flexibility in shape, color, and transparency. DSC research groups have been established around the worl ...
8,707 citations
Cites background from "Silicon quantum wire array fabricat..."
...The striking optical properties of nanoporous silicon obtained by photoanodic etching [54] extended the materials research scope of photoelectrochemistry to other porous crystalline semiconductors [55]....
[...]
TL;DR: In this article, the authors present methods of severe plastic deformation and formation of nanostructures, including Torsion straining under high pressure, ECA pressing, and multiple forging.
5,763 citations
TL;DR: The synthesis of massive arrays of monodispersed carbon nanotubes that are self-oriented on patterned porous silicon and plain silicon substrates is reported and the mechanisms of nanotube growth and self-orientation are elucidated.
Abstract: The synthesis of massive arrays of monodispersed carbon nanotubes that are self-oriented on patterned porous silicon and plain silicon substrates is reported. The approach involves chemical vapor deposition, catalytic particle size control by substrate design, nanotube positioning by patterning, and nanotube self-assembly for orientation. The mechanisms of nanotube growth and self-orientation are elucidated. The well-ordered nanotubes can be used as electron field emission arrays. Scaling up of the synthesis process should be entirely compatible with the existing semiconductor processes, and should allow the development of nanotube devices integrated into silicon technology.
3,093 citations
TL;DR: A large amount of work world wide has been directed towards obtaining an understanding of the fundamental characteristics of porous Si as mentioned in this paper, and the key importance of crystalline Si nanostructures in determining the behaviour of porous si is highlighted.
Abstract: A large amount of work world-wide has been directed towards obtaining an understanding of the fundamental characteristics of porous Si. Much progress has been made following the demonstration in 1990 that highly porous material could emit very efficient visible photoluminescence at room temperature. Since that time, all features of the structural, optical and electronic properties of the material have been subjected to in-depth scrutiny. It is the purpose of the present review to survey the work which has been carried out and to detail the level of understanding which has been attained. The key importance of crystalline Si nanostructures in determining the behaviour of porous Si is highlighted. The fabrication of solid-state electroluminescent devices is a prominent goal of many studies and the impressive progress in this area is described.
2,371 citations
References
More filters
TL;DR: In this paper, the formation and properties of porous silicon formed by anodising silicon under a wide range of conditions were investigated and the currentvoltage characteristics of the silicon-hydrofluoric acid system were presented.
477 citations
TL;DR: The structural analysis showed that the materials consist of small crystalline silicon particles surrounded by hydrogen atoms, whose diameters are 20--30 A\r{}.
Abstract: We have succeeded in fabricating the mostly crystallized Si:H materials having a wide optical band gap of up to 2.4 eV by means of a reactive sputtering technique with a low substrate temperature of \ensuremath{\sim}100 K. The structural analysis showed that the materials consist of small crystalline silicon particles surrounded by hydrogen atoms, whose diameters are 20--30 A\r{}. The widening of the optical band gap can be explained by a three-dimensional quantum-well effect in the small particles.
400 citations
TL;DR: The detailed structure of porous Si (PS) layers formed in p-type wafers with resistivities 0.01-25 Omega cm has been investigated using reflectance, transmission, ellipsometry and photoluminescence techniques as discussed by the authors.
Abstract: The detailed structure of porous Si (PS) layers formed in p-type wafers with resistivities 0.01-25 Omega cm has been investigated using reflectance, transmission, ellipsometry and photoluminescence techniques. Marked differences were observed in the optical properties of PS formed in degenerate or non-degenerate Si and these results are correlated with the results of other techniques. The optical techniques together with effective medium modelling have been shown to be useful non-destructive methods for either assessment of PS density or detection of unsuspected phases. The degenerate PS layers consistently showed good retention of the single-crystal characteristics of the starting wafer, only c-Si and voids being detected. For these samples, good agreement was obtained between optical and gravimetric densities. However, the non-degenerate PS had much greater variability, with greater loss of crystallinity and significant incorporation of oxygen, due to partial oxidation having occurred on or immediately after anodisation. Oxide fractions have been determined both optically and gravimetrically, with up to 50% oxide being detected in some samples. Non-degenerate PS samples with high oxygen concentrations appeared to be in the form of a chemical mixture, SiOx, from interpretation of the optical constants. Photoluminescence measurements together with the other techniques indicated a complex mixture of phases in the latter samples-voids, alpha -Si:O (and/or alpha -Si:H), an unknown amorphous phase and silicon oxide. This complex structure probably contributes to the observed instability of thick non-degenerate PS layers when heated in UHV as part of the cleaning procedure prior to epitaxial growth, all degenerate samples being able to withstand heat treatment.
272 citations
TL;DR: In this paper, the difference in lattice parameter between the silicon substrate and the porous layer and the strains of the porous lattice have been determined accurately on a double crystal diffractometer for a series of porous structures.
197 citations