scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Single step synthesis of activated bio-carbons with a high surface area and their excellent CO2 adsorption capacity

01 May 2017-Carbon (Pergamon)-Vol. 116, pp 448-455
TL;DR: In this paper, a single step reaction between Arundo donax and solid KOH at 600°C for 2h was developed to synthesize activated microporous carbons with a high specific surface area.
About: This article is published in Carbon.The article was published on 2017-05-01. It has received 234 citations till now. The article focuses on the topics: Microporous material & Adsorption.
Citations
More filters
Journal ArticleDOI
TL;DR: This review encompasses the approaches and the wide range of methodologies that have been employed over the last five years in the preparation and functionalisation of nanoporous carbon materials via incorporation of metals, non-metal heteroatoms, multiple heteroatOMs, and various surface functional groups that mostly dictate their place in a widerange of practical applications.
Abstract: Functionalized nanoporous carbon materials have attracted the colossal interest of the materials science fraternity owing to their intriguing physical and chemical properties including a well-ordered porous structure, exemplary high specific surface areas, electronic and ionic conductivity, excellent accessibility to active sites, and enhanced mass transport and diffusion. These properties make them a special and unique choice for various applications in divergent fields such as energy storage batteries, supercapacitors, energy conversion fuel cells, adsorption/separation of bulky molecules, heterogeneous catalysts, catalyst supports, photocatalysis, carbon capture, gas storage, biomolecule detection, vapour sensing and drug delivery. Because of the anisotropic and synergistic effects arising from the heteroatom doping at the nanoscale, these novel materials show high potential especially in electrochemical applications such as batteries, supercapacitors and electrocatalysts for fuel cell applications and water electrolysis. In order to gain the optimal benefit, it is necessary to implement tailor made functionalities in the porous carbon surfaces as well as in the carbon skeleton through the comprehensive experimentation. These most appealing nanoporous carbon materials can be synthesized through the carbonization of high carbon containing molecular precursors by using soft or hard templating or non-templating pathways. This review encompasses the approaches and the wide range of methodologies that have been employed over the last five years in the preparation and functionalisation of nanoporous carbon materials via incorporation of metals, non-metal heteroatoms, multiple heteroatoms, and various surface functional groups that mostly dictate their place in a wide range of practical applications.

653 citations

Journal ArticleDOI
TL;DR: In this paper, a microwave pyrolysis of biomass is proposed to produce activated biochar with desirable properties for wide application in pollution control, catalysis and energy storage, and the key implications for future development are highlighted.

433 citations

Journal ArticleDOI
TL;DR: The emerging trends in major porous adsorbents such as MOFs, zeolites, POPs, porous carbons, and mesoporous materials for CO2 capture and conversion are discussed and their surface texture and chemistry and the influence of various other features on their efficiency, selectivity, and recyclability are explained and compared thoroughly.
Abstract: The presence of an excessive concentration of CO2 in the atmosphere needs to be curbed with suitable measures including the reduction of CO2 emissions at stationary point sources such as power plants through carbon capture technologies and subsequent conversion of the captured CO2 into non-polluting clean fuels/chemicals using photo and/or electrocatalytic pathways. Porous materials have attracted much attention for carbon capture and in the recent past; they have witnessed significant advancements in their design and implementation for CO2 capture and conversion. In this context, the emerging trends in major porous adsorbents such as MOFs, zeolites, POPs, porous carbons, and mesoporous materials for CO2 capture and conversion are discussed. Their surface texture and chemistry, and the influence of various other features on their efficiency, selectivity, and recyclability for CO2 capture and conversion are explained and compared thoroughly. The scientific and technical advances on the material structure versus CO2 capture and conversion provide deep insights into designing effective porous materials. The review concludes with a summary, which compiles the key challenges in the field, current trends and critical challenges in the development of porous materials, and future research directions combined with possible solutions for realising the deployment of porous materials in CO2 capture and conversion.

371 citations

Journal ArticleDOI
01 Jul 2019-Carbon
TL;DR: In this paper, the key results from published literature have been consolidated and critical commentary has been provided to give a broad insight into the production of biochar and activated porous carbons and their application in CO2 capture.

310 citations

Journal ArticleDOI
TL;DR: The activated bio-chars (AB) were successfully synthesized from rice husk by one- and two-step KOH-catalyzed pyrolysis, and the adsorption process defined well with the pseudo-second-order model.

224 citations

References
More filters
Journal ArticleDOI
TL;DR: The CO(2) adsorption behavior of several different classes of solid carbon dioxide adsorbents, including zeolites, activated carbons, calcium oxides, hydrotalcites, organic-inorganic hybrids, and metal-organic frameworks are described.
Abstract: Since the time of the industrial revolution, the atmospheric CO(2) concentration has risen by nearly 35 % to its current level of 383 ppm. The increased carbon dioxide concentration in the atmosphere has been suggested to be a leading contributor to global climate change. To slow the increase, reductions in anthropogenic CO(2) emissions are necessary. Large emission point sources, such as fossil-fuel-based power generation facilities, are the first targets for these reductions. A benchmark, mature technology for the separation of dilute CO(2) from gas streams is via absorption with aqueous amines. However, the use of solid adsorbents is now being widely considered as an alternative, potentially less-energy-intensive separation technology. This Review describes the CO(2) adsorption behavior of several different classes of solid carbon dioxide adsorbents, including zeolites, activated carbons, calcium oxides, hydrotalcites, organic-inorganic hybrids, and metal-organic frameworks. These adsorbents are evaluated in terms of their equilibrium CO(2) capacities as well as other important parameters such as adsorption-desorption kinetics, operating windows, stability, and regenerability. The scope of currently available CO(2) adsorbents and their critical properties that will ultimately affect their incorporation into large-scale separation processes is presented.

2,149 citations

Journal ArticleDOI
TL;DR: In this article, the textural properties and surface chemistry of KOH-activated carbons depend on not only the synthesis parameters, but also different carbon sources employed including fossil/biomass-derived materials, synthetic organic polymers, and various nanostructured carbons (e.g. carbon nanotubes, carbon nanofibers, carbon aerogels, carbide-derived carbons, graphene, etc.).
Abstract: Because of their availability, adjustable microstructure, varieties of forms, and large specific surface area, porous carbon materials are of increasing interest for use in hydrogen storage adsorbents and electrode materials in supercapacitors and lithium–sulfur cells from the viewpoint of social sustainability and environmental friendliness. Therefore, much effort has been made to synthesize and tailor the microstructures of porous carbon materials via various activation procedures (physical and chemical activation). In particular, the chemical activation of various carbon sources using KOH as the activating reagent is very promising because of its lower activation temperature and higher yields, and well-defined micropore size distribution and ultrahigh specific surface area up to 3000 m2 g−1 of the resulting porous carbons. In this feature article, we will cover recent research progress since 2007 on the synthesis of KOH-activated carbons for hydrogen and electrical energy storage (supercapacitors and lithium–sulfur batteries). The textural properties and surface chemistry of KOH-activated carbons depend on not only the synthesis parameters, but also different carbon sources employed including fossil/biomass-derived materials, synthetic organic polymers, and various nanostructured carbons (e.g. carbon nanotubes, carbon nanofibers, carbon aerogels, carbide-derived carbons, graphene, etc.). Following the introduction to KOH activation mechanisms and processing technologies, the characteristics and performance of KOH-activated carbons as well as their relationships are summarized and discussed through the extensive analysis of the literature based on different energy storage systems.

2,046 citations

Journal ArticleDOI
TL;DR: In this article, a route for the controlled synthesis of mesoporous polymer nanospheres, which can be further converted into carbon nanosphere through carbonization, is presented.
Abstract: The controlled synthesis of monodisperse nanospheres faces a number of difficulties, such as extensive crosslinking during hydrothermal processes. Here, the authors show a route for the controlled synthesis of mesoporous polymer nanospheres, which can be further converted into carbon nanospheres through carbonization.

1,542 citations

Journal ArticleDOI
TL;DR: The forms of alkalis of the biochars produced from the straws of canola, corn, soybean and peanut at different temperatures (300, 500 and 700°C) were studied by means of oxygen-limited pyrolysis and it was suggested that carbonates were the major alkaline components in theBiochars generated at the high temperature.

1,482 citations

Journal ArticleDOI
01 Feb 2003-Carbon
TL;DR: In this article, the drying process, the atmosphere during the carbonisation, the chemical state of the activating agents (NaOH, KOH and Na 2 CO 3 ) and the chemical reactions occurring during the heat treatment have been analyzed to deep into the fundamental of the knowledge of this chemical activation process.

989 citations