Sodium-ion batteries: present and future
19 Jun 2017-Chemical Society Reviews (The Royal Society of Chemistry)-Vol. 46, Iss: 12, pp 3529-3614
TL;DR: Current research on materials is summarized and discussed and future directions for SIBs are proposed to provide important insights into scientific and practical issues in the development of S IBs.
Abstract: Energy production and storage technologies have attracted a great deal of attention for day-to-day applications. In recent decades, advances in lithium-ion battery (LIB) technology have improved living conditions around the globe. LIBs are used in most mobile electronic devices as well as in zero-emission electronic vehicles. However, there are increasing concerns regarding load leveling of renewable energy sources and the smart grid as well as the sustainability of lithium sources due to their limited availability and consequent expected price increase. Therefore, whether LIBs alone can satisfy the rising demand for small- and/or mid-to-large-format energy storage applications remains unclear. To mitigate these issues, recent research has focused on alternative energy storage systems. Sodium-ion batteries (SIBs) are considered as the best candidate power sources because sodium is widely available and exhibits similar chemistry to that of LIBs; therefore, SIBs are promising next-generation alternatives. Recently, sodiated layer transition metal oxides, phosphates and organic compounds have been introduced as cathode materials for SIBs. Simultaneously, recent developments have been facilitated by the use of select carbonaceous materials, transition metal oxides (or sulfides), and intermetallic and organic compounds as anodes for SIBs. Apart from electrode materials, suitable electrolytes, additives, and binders are equally important for the development of practical SIBs. Despite developments in electrode materials and other components, there remain several challenges, including cell design and electrode balancing, in the application of sodium ion cells. In this article, we summarize and discuss current research on materials and propose future directions for SIBs. This will provide important insights into scientific and practical issues in the development of SIBs.
Citations
More filters
TL;DR: The amorphous Sb2S3/CNT nanocomposites as an anode for NIBs exhibit excellent electrochemical performance and a high charge capacity, attributed to the synergic effects of the amorphously Sb 2S3 nanospheres and 3D porous conductive network constructed by the CNTs.
Abstract: Antimony sulfide (Sb2S3) with a high theoretical capacity is considered as a promising candidate for Na-ion batteries (NIBs) and K-ion batteries (KIBs). However, its poor electrochemical activity and structural stability are the main issues to be solved. Herein, amorphous Sb2S3 nanospheres/carbon nanotube (Sb2S3/CNT) nanocomposites are successfully synthesized via one step self-assembly method. In-situ growth of amorphous Sb2S3 nanospheres on the CNTs is confirmed by X-ray diffraction, field-emission scanning electron microscopy, and transmission electron microscopy. The amorphous Sb2S3/CNT nanocomposites as an anode for NIBs exhibit excellent electrochemical performance, delivering a high charge capacity of 870 mA h g−1 at 100 mA g−1, with an initial coulomb efficiency of 77.8%. Even at 3000 mA g−1, a charge capacity of 474 mA h g−1 can be achieved. As an anode for KIBs, the amorphous Sb2S3/CNT nanocomposites also demonstrate a high charge capacity of 451 mA h g−1 at 25 mA g−1. The remarkable performance of the amorphous Sb2S3/CNT nanocomposites is attributed to the synergic effects of the amorphous Sb2S3 nanospheres and 3D porous conductive network constructed by the CNTs.
21 citations
Cites background from "Sodium-ion batteries: present and f..."
...38 Å), however, it is difficult to find appropriate electrode materials, as they would need high capacities, rapid diffusion kinetics and long life cycles [3,4]....
[...]
TL;DR: In this paper , the recent advances in developing emerging 2D Ni-based materials for electrochemical energy storage have attracted considerable attention due to their distinctive properties, including high electro-activity, large specific surface areas, controllable chemical compositions, and abundant forms of composite materials.
21 citations
TL;DR: In this article, a series of Al-doped O3-NaFe(1/3-x)Ni 1/3Mn 1/ 3AlxO2 cathodes were investigated to enhance their electrochemical performance and air stability through stabilizing their structural and interface chemical properties.
Abstract: Na-ion batteries (NIBs) have been considered as potential candidates for large-scale energy storage, where O3-type Na-based layered oxide cathodes have attracted great attention due to their high capacity and low cost. However, O3-NaxTMO2 materials still suffer from insufficient air stability, which could lead to deteriorative electrochemical properties and thus hinder their practical application. In this work, a series of Al-doped O3-NaFe(1/3-x)Ni1/3Mn1/3AlxO2 cathodes prepared by a co-precipitation method were investigated to enhance their electrochemical performance and air stability through stabilizing their structural and interface chemical properties. The Al-doped O3-NaFe(1/3-0.01)Ni1/3Mn1/3Al0.01O2 (NFNMA0.01) cathode delivers a comparable capacity of 138 mAh g-1 and keeps a capacity retention of 85.88% after 50 cycles at 0.2 C, while the undoped O3-NaFe1/3Ni1/3Mn1/3O2 (NFNM) can only keep a capacity retention of 71.02%, although with an initial capacity of 141 mAh g-1 at 0.2 C. For the air stability, the capacity decay rates are 58.87 and 5.07% for the undoped NFNM and Al-doped NFNMA0.01 after the air exposure for 30 days, respectively. The greatly decaying electrochemical performance could be due to the formation of carbonates during air exposure, which can be efficiently suppressed by Al doping. The doped Al3+ has been confirmed to be inserted into the NFNM crystal lattice, inducing the reduced values of lattice parameters a and c due to the smaller ionic radius of Al3+ (53.5 pm) vs Fe3+ (55.0 pm). This study demonstrates that Al doping plays an important role in the air stability and cycling stability for layered cathode materials, which offers an efficient strategy to optimize the material design for their practical application in NIBs.
21 citations
TL;DR: In this paper, a simple synthesis for watermelon-like nanocomposites with Ti-based oxides as the matrix is presented, which exhibits a long cycle life and high capacity retention.
21 citations
TL;DR: In this paper, a composite material of anatase TiO 2 anchored on nitrogen and sulfur co-doped RGO matrix was successfully prepared by a rational designed process, which exhibited ultrasmall crystal size, rich porous structure, homogeneous heteroatoms doping and thin carbon coating.
21 citations
References
More filters
TL;DR: The battery systems reviewed here include sodium-sulfur batteries that are commercially available for grid applications, redox-flow batteries that offer low cost, and lithium-ion batteries whose development for commercial electronics and electric vehicles is being applied to grid storage.
Abstract: The increasing interest in energy storage for the grid can be attributed to multiple factors, including the capital costs of managing peak demands, the investments needed for grid reliability, and the integration of renewable energy sources. Although existing energy storage is dominated by pumped hydroelectric, there is the recognition that battery systems can offer a number of high-value opportunities, provided that lower costs can be obtained. The battery systems reviewed here include sodium-sulfur batteries that are commercially available for grid applications, redox-flow batteries that offer low cost, and lithium-ion batteries whose development for commercial electronics and electric vehicles is being applied to grid storage.
11,144 citations
TL;DR: In this paper, a single epitaxial graphene layer at the silicon carbide interface is shown to reveal the Dirac nature of the charge carriers, and all-graphene electronically coherent devices and device architectures are envisaged.
Abstract: Ultrathin epitaxial graphite was grown on single-crystal silicon carbide by vacuum graphitization. The material can be patterned using standard nanolithography methods. The transport properties, which are closely related to those of carbon nanotubes, are dominated by the single epitaxial graphene layer at the silicon carbide interface and reveal the Dirac nature of the charge carriers. Patterned structures show quantum confinement of electrons and phase coherence lengths beyond 1 micrometer at 4 kelvin, with mobilities exceeding 2.5 square meters per volt-second. All-graphene electronically coherent devices and device architectures are envisaged.
4,848 citations
Journal Article•
TL;DR: The transport properties, which are closely related to those of carbon nanotubes, are dominated by the single epitaxial graphene layer at the silicon carbide interface and reveal the Dirac nature of the charge carriers.
Abstract: Ultrathin epitaxial graphite was grown on single-crystal silicon carbide by vacuum graphitization. The material can be patterned using standard nanolithography methods. The transport properties, which are closely related to those of carbon nanotubes, are dominated by the single epitaxial graphene layer at the silicon carbide interface and reveal the Dirac nature of the charge carriers. Patterned structures show quantum confinement of electrons and phase coherence lengths beyond 1 micrometer at 4 kelvin, with mobilities exceeding 2.5 square meters per volt-second. All-graphene electronically coherent devices and device architectures are envisaged.
4,578 citations
4,311 citations
[...]
TL;DR: In this paper, the status of ambient temperature sodium ion batteries is reviewed in light of recent developments in anode, electrolyte and cathode materials, including high performance layered transition metal oxides and polyanionic compounds.
Abstract: The status of ambient temperature sodium ion batteries is reviewed in light of recent developments in anode, electrolyte and cathode materials. These devices, although early in their stage of development, are promising for large-scale grid storage applications due to the abundance and very low cost of sodium-containing precursors used to make the components. The engineering knowledge developed recently for highly successful Li ion batteries can be leveraged to ensure rapid progress in this area, although different electrode materials and electrolytes will be required for dual intercalation systems based on sodium. In particular, new anode materials need to be identified, since the graphite anode, commonly used in lithium systems, does not intercalate sodium to any appreciable extent. A wider array of choices is available for cathodes, including high performance layered transition metal oxides and polyanionic compounds. Recent developments in electrodes are encouraging, but a great deal of research is necessary, particularly in new electrolytes, and the understanding of the SEI films. The engineering modeling calculations of Na-ion battery energy density indicate that 210 Wh kg−1 in gravimetric energy is possible for Na-ion batteries compared to existing Li-ion technology if a cathode capacity of 200 mAh g−1 and a 500 mAh g−1 anode can be discovered with an average cell potential of 3.3 V.
3,776 citations