Book•
Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing
12 May 1990-
TL;DR: Gel-Derived and Conventional Ceramics: as discussed by the authors Theoretical analysis of deformation and flow in gels and a comparison of gel-derived and conventional ceramics.
Abstract: Preface. Acknowledgments. Introduction. Hydrolysis and Condensation I: Nonsilicates. Hydrolysis and Condensation II: Silicates. Particulate Sols and Gels. Gelation. Aging of Gels. Theory of Deformation and Flow in Gels. Drying. Structural Evolution during Consolidation. Surface Chemistry and Chemical Modification. Sintering. Comparison of Gel-Derived and Conventional Ceramics. Film Formation. Applications. Index.
Citations
More filters
TL;DR: A review of surface modification techniques for titanium and titanium alloys can be found in this article, where the authors have shown that the wear resistance, corrosion resistance, and biological properties can be improved selectively using the appropriate surface treatment techniques while the desirable bulk attributes of the materials are retained.
Abstract: Titanium and titanium alloys are widely used in biomedical devices and components, especially as hard tissue replacements as well as in cardiac and cardiovascular applications, because of their desirable properties, such as relatively low modulus, good fatigue strength, formability, machinability, corrosion resistance, and biocompatibility. However, titanium and its alloys cannot meet all of the clinical requirements. Therefore, in order to improve the biological, chemical, and mechanical properties, surface modification is often performed. This article reviews the various surface modification technologies pertaining to titanium and titanium alloys including mechanical treatment, thermal spraying, sol–gel, chemical and electrochemical treatment, and ion implantation from the perspective of biomedical engineering. Recent work has shown that the wear resistance, corrosion resistance, and biological properties of titanium and titanium alloys can be improved selectively using the appropriate surface treatment techniques while the desirable bulk attributes of the materials are retained. The proper surface treatment expands the use of titanium and titanium alloys in the biomedical fields. Some of the recent applications are also discussed in this paper.
3,019 citations
Cites background from "Sol-Gel Science: The Physics and Ch..."
...A sol is a colloid suspension of solid particles in a liquid and a gel is a substance that contains a continuous solid skeleton enclosing a continuous liquid phase [109]....
[...]
2,970 citations
2,877 citations
TL;DR: The development of novel materials is a fundamental focal point of chemical research; and this interest is mandated by advancements in all areas of industry and technology.
Abstract: The development of novel materials is a fundamental focal point of chemical research; and this interest is mandated by advancements in all areas of industry and technology. A good example of the synergism between scientific discovery and technological development is the electronics industry, where discoveries of new semiconducting materials resulted in the evolution from vacuum tubes to diodes and transistors, and eventually to miniature chips. The progression of this technology led to the development * To whom correspondence should be addressed. B.L.C.: (504) 2801385 (phone); (504) 280-3185 (fax); bcushing@uno.edu (e-mail). C.J.O.: (504)280-6846(phone);(504)280-3185(fax);coconnor@uno.edu (e-mail). 3893 Chem. Rev. 2004, 104, 3893−3946
2,621 citations
TL;DR: In this article, the authors propose a vectorial chemistry approach for the generation of new generations of hybrid materials, which will open a land of promising applications in many areas: optics, electronics, ionics, mechanics, energy, environment, biology, medicine for example as membranes and separation devices, functional smart coatings, fuel and solar cells, catalysts, sensors, etc.
Abstract: Organic–inorganic hybrid materials do not represent only a creative alternative to design new materials and compounds for academic research, but their improved or unusual features allow the development of innovative industrial applications. Nowadays, most of the hybrid materials that have already entered the market are synthesised and processed by using conventional soft chemistry based routes developed in the eighties. These processes are based on: a) the copolymerisation of functional organosilanes, macromonomers, and metal alkoxides, b) the encapsulation of organic components within sol–gel derived silica or metallic oxides, c) the organic functionalisation of nanofillers, nanoclays or other compounds with lamellar structures, etc. The chemical strategies (self-assembly, nanobuilding block approaches, hybrid MOF (Metal Organic Frameworks), integrative synthesis, coupled processes, bio-inspired strategies, etc.) offered nowadays by academic research allow, through an intelligent tuned coding, the development of a new vectorial chemistry, able to direct the assembling of a large variety of structurally well defined nano-objects into complex hybrid architectures hierarchically organised in terms of structure and functions. Looking to the future, there is no doubt that these new generations of hybrid materials, born from the very fruitful activities in this research field, will open a land of promising applications in many areas: optics, electronics, ionics, mechanics, energy, environment, biology, medicine for example as membranes and separation devices, functional smart coatings, fuel and solar cells, catalysts, sensors, etc.
2,321 citations