scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Solar cell efficiency tables (Version 38)

About: This article is published in Progress in Photovoltaics.The article was published on 2011-08-01. It has received 326 citations till now. The article focuses on the topics: Solar energy & Solar cell.
Citations
More filters
Journal ArticleDOI
TL;DR: This work reviews the roll-to-roll processing techniques required to bring the magnificent 10-10 targets into reality, using quick methods with low environmental impact and low cost and highlights some new targets related to processing speed, materials, and environmental impact.

1,276 citations

Journal ArticleDOI
TL;DR: O'Regan and Gratzel demonstrated that a film of titania nanoparticles deposited on a DSC would act as a mesoporous n-type photoanode and thereby increase the available surface area for dye attachment by a factor of more than a thousand.
Abstract: Dye-sensitized solar cells (DSCs) are attractive because they are made from cheap materials that do not need to be highly purified and can be printed at low cost 1 . DSCs are unique compared with almost all other kinds of solar cells in that electron transport, light absorption and hole transport are each handled by different materials in the cell 2,3 . The sensitizing dye in a DSC is anchored to a wide-bandgap semiconductor such as TiO2, SnO2 or ZnO. When the dye absorbs light, the photoexcited electron rapidly transfers to the conduction band of the semiconductor, which carries the electron to one of the electrodes 4 . A redox couple, usually comprised of iodide/triiodide (I – /I3 – ), then reduces the oxidized dye back to its neutral state and transports the positive charge to the platinized counter-electrode 5 . In 1991, O’Regan and Gratzel demonstrated that a film of titania (TiO2) nanoparticles deposited on a DSC would act as a mesoporous n-type photoanode and thereby increase the available surface area for dye attachment by a factor of more than a thousand 1 . This approach dramatically improved light absorption and brought power-conversion efficiencies into a range that allowed the DSC to be viewed as a serious competitor to other solar cell technologies 6 . A schematic and energy level diagram showing the operation of a typical DSC is shown in Fig. 1. During the 1990s and the early 2000s, researchers found that organometallic complexes based on ruthenium provided the highest power-conversion efficiencies 7,8

1,215 citations

Journal ArticleDOI
TL;DR: In this paper, the authors provide an overview on the recent development of solution processed organic, inorganic, and hybrid interfacial materials for bulk-heterojunction polymer solar cells.
Abstract: This article provides an overview on the recent development of solution processed organic, inorganic, and hybrid interfacial materials for bulk-heterojunction polymer solar cells. The introduction of proper interfacial materials to optimize the electronic and electrical properties between the interfaces of the light-harvesting active layer and the charge-collecting electrode has become an important criterion to improve the performance of polymer solar cells. The electronic processes at these interfaces play a critical role in determining the efficiency for photon-to-electricity conversion. An ideal interface requires the formation of Ohmic contact with minimum resistance and high charge selectivity to prevent charge carriers from reaching the opposite electrodes. For long-term stability of polymer solar cells, interfaces with matched surface energy are required to prevent interfacial dewetting and delamination. Several classes of interfacial materials including inorganic metal oxides, crosslinkable charge-transporting materials, conjugated polymer electrolytes, self-assembled functional molecules, and graphene-based materials are highlighted and the integration of these interfacial materials with new low bandgap polymers and fullerene derivatives as active materials in different device architectures is also discussed.

995 citations

Journal ArticleDOI
TL;DR: The relationship between the photovoltaic performance and the structure of perylene imides is discussed and perylene imides-based copolymers or oligomers play an important role in single junction devices.
Abstract: Perylene imides have been an object of research for 100 years and their derivatives are key n-type semiconductors in the field of organic electronics. While perylene diimides have been applied in many electronic and photonic devices, their use can be traced back to the first efficient organic solar cell. By functionalizing different positions of the in total 12 positions (four peri, four bay, and four ortho-positions) on the perylene core, perylene imides with significantly different optical, electronic and morphological properties may be prepared. Perylene imides and their derivatives have been used in several types of organic photovoltaics, including flat-, and bulk-heterojunction devices as well as dye-sensitized solar cells. Additionally perylene imides-based copolymers or oligomers play an important role in single junction devices. In this review, the relationship between the photovoltaic performance and the structure of perylene imides is discussed.

794 citations

References
More filters
Journal ArticleDOI
TL;DR: In this article, the current understanding of stability/degradation in organic and polymer solar cell devices is presented and the methods for studying and elucidating degradation are discussed Methods for enhancing the stability through the choice of better active materials, encapsulation, application of getter materials and UV-filters are also discussed

2,284 citations


Additional excerpts

  • ...[30,31] review the stability of similar devices....

    [...]

Journal ArticleDOI
TL;DR: In this paper, the authors reported a new record total area efficiency of 19·9% for thin-film solar cells using three-stage co-evaporation with a modified surface termination.
Abstract: We report a new record total-area efficiency of 19·9% for CuInGaSe2-based thin-film solar cells. Improved performance is due to higher fill factor. The device was made by three-stage co-evaporation with a modified surface termination. Growth conditions, device analysis, and basic film characterization are presented. Published in 2008 by John Wiley & Sons, Ltd.

1,964 citations

Journal ArticleDOI
TL;DR: In this article, the authors presented a new certified world record efficiency of 20.1 and 20.3% for thin-film solar cells for the first time and analyzed the characteristics of solar cells on such a performance level and demonstrate a high degree of reproducibility.
Abstract: In this contribution, we present a new certified world record efficiency of 20.1 and 20.3% for Cu(In,Ga)Se2 thin-film solar cells. We analyse the characteristics of solar cells on such a performance level and demonstrate a high degree of reproducibility. Copyright © 2011 John Wiley & Sons, Ltd.

1,951 citations


Additional excerpts

  • ...CIGS on glass [42]...

    [...]

Journal ArticleDOI
TL;DR: A non-vacuum, slurry-based coating method that combines advantages of both solution processing and particlebased deposition is shown, enabling fabrication of Cu2ZnSn(Se,S)4 devices with over 9.6% efficiency—a factor of five performance improvement relative to previous attempts to use highthroughput ink-based approaches and >40% higher than previous record devices prepared using vacuum-based methods.
Abstract: 2010 WILEY-VCH Verlag Gmb Chalcogenide-based solar cells provide a critical pathway to cost parity between photovoltaic (PV) and conventional energy sources. Currently, only Cu(In,Ga)(S,Se)2 (CIGS) and CdTe technologies have reached commercial module production with stable power conversion efficiencies of over 9 percent. Despite the promise of these technologies, restrictions on heavy metal usage for Cd and limitations in supply for In and Te are projected to restrict the production capacity of the existing chalcogen-based technologies to <100GWp per year, a small fraction of our growing energy needs, which are expected to double to 27 TW by 2050. Earth-abundant copper-zinc-tin-chalcogenide kesterites, Cu2ZnSnS4 and Cu2ZnSnSe4, have been examined as potential alternatives for the two leading technologies, reaching promising but not yet marketable efficiencies of 6.7% and 3.2%, respectively, by multilayer vacuum deposition. Here we show a non-vacuum, slurry-based coating method that combines advantages of both solution processing and particlebased deposition, enabling fabrication of Cu2ZnSn(Se,S)4 devices with over 9.6% efficiency—a factor of five performance improvement relative to previous attempts to use highthroughput ink-based approaches and >40% higher than previous record devices prepared using vacuum-based methods. To address the issue of cost, non-vacuum ‘‘ink’’-based approaches—both from solutions and suspensions—are being developed for chalcogenide-based absorber layer deposition to replace potentially more expensive vacuum-based techniques. True solutions allow intermixing of the constituents at a molecular level and the formation of smooth homogeneous films, as demonstrated with spin-coated CIGS absorber layers from hydrazine (N2H4) solutions. [11–13] The chemically reducing character of hydrazine stabilizes solutions of anions with direct metal-chalcogen bonding for select elements (e.g. Cu, In, Ga, Sn), without the necessity to introduce typical impurities (e.g., C, O, Cl). Suspension approaches employ solid particles designed to be deposited on a substrate and reacted or fused with each other, to form a desired crystalline phase and grain structure. Normally insoluble components can be deposited by this approach using typical liquid-based deposition (e.g., printing, spin coating, slit casting, spraying). Although high-quality large-grained absorber layers can be formed for selected systems using either solutionor particlebased deposition, numerous challenges confront each approach for more general deposition needs. Solution processing is limited by the solubility of many materials of interest (e.g., ZnSe1–xSx in hydrazine solvents—relevant for the deposition of Cu2ZnSnS4 or Cu2ZnSnSe4). In addition, volume contraction upon drying of solution-deposited layers creates stress in the film that may cause crack formation in thicker films. In suspension approaches, a common difficulty is achieving single-phase crystallization among the solid particles. Particle-based approaches (as well as some solution methods) typically require the addition of organic agents to improve wetting and particle dispersion, and to avoid film cracks and delamination. Most of these non-volatile organic additives introduce carbon contamination in the final layer. Because of these challenges, vacuum-based techniques have historically shown superior performance to liquid coating. In the case of the earth-abundant Cu2ZnSn(S,Se)4 materials, ink-based approaches have to date yielded at most <1.6% efficiency devices. Here we demonstrate an hybrid solution-particle approach, using the earth-abundant Cu2ZnSn(S,Se)4 system as an example, which enables fabrication of PV devices with over 9.6% power conversion efficiency. The slurry (or ink) employed for deposition comprises a Cu–Sn chalcogenide (S or S–Se) solution in hydrazine (see Experimental section), with the in situ formation of readily dispersible particle-based Zn-chalcogenide precursors, ZnSe(N2H4) (Figure 1a,d) or ZnS(N2H4) (Figure 1b). Thermogravimetric analysis (TGA) of the isolated selenide particle precursor shows decomposition at approximately 200 8C, with mass loss of about 20%, close to the theoretical value expected upon transition to pure ZnSe (Figure 1c,d). Deposition using this hybrid slurry successfully combines the advantages of solution and suspension deposition routes by use of solutions containing solid particles, wherein both components (i.e., solution and particle) contain metal and chalcogen elements that integrate into the final film. Using the hybrid slurry method (i) solubility limitations are resolved, as virtually any materials system can be constituted by a combination of solid and dissolved components; (ii) the dissolved components can be engineered as an efficient binding media for the particles, eliminating the need of separate organic binders; (iii) solid particles act as stress-relief and crack-deflection centers allowing the deposition of thicker layers than pure solution processes; and (iv) the intimate contact between the two phases allows rapid reaction and homogeneous phase formation. Complete conversion of all constituents of the spin-coated hybrid precursor films into a single-phase, highly crystalline Cu2ZnSn(S,Se)4 is achieved by annealing at 540 8C on a hot plate. Three main types of samples were targeted – high selenium content (A), intermediate sulfoselenide (B) and pure sulfide (C) –

1,085 citations


"Solar cell efficiency tables (Versi..." refers background in this paper

  • ...4 NREL (8/09) IBM solution grown [10] a-Si/nc-Si/nc-Si (tandem) 12....

    [...]

Journal ArticleDOI
TL;DR: In this paper, a hexagonally symmetric honeycomb surface texture was used to reduce reflection loss in multicrystalline silicon solar cells and increase the cell's effective optical thickness.
Abstract: Multicrystalline silicon wafers, widely used in commercial photovoltaic cell production, traditionally give much poorer cell performance than monocrystalline wafers (the previously highest performance laboratory devices have solar energy conversion efficiencies of 186% and 240%, respectively) A substantially improved efficiency for a multicrystalline silicon solar cell of 198% is reported together with an incremental improvement in monocrystalline cell efficiency to 244% The improved multicrystalline cell performance results from enshrouding cell surfaces in thermally grown oxide to reduce their detrimental electronic activity and from isotropic etching to form an hexagonally symmetric “honeycomb” surface texture This texture reduces reflection loss as well as substantially increasing the cell’s effective optical thickness by causing light to be trapped within the cell by total internal reflection

977 citations