scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Solid-state NMR characterization of the molecular conformation in disordered methyl α-L-rhamnofuranoside.

20 Jun 2013-Journal of Physical Chemistry A (American Chemical Society (ACS))-Vol. 117, Iss: 26, pp 5534-5541
TL;DR: A concerted rearrangement of OH hydrogens is proposed to account for the observed dynamic disorder in disordered methyl α-L-rhamnofuranoside and the relatively minor differences in non-hydrogen atom positions suggest that characterization of a complete crystal structure by X-ray powder diffraction may be feasible.
Abstract: A combination of solid-state 13C NMR tensor data and DFT computational methods is utilized to predict the conformation in disordered methyl α-l-rhamnofuranoside. This previously uncharacterized solid is found to be crystalline and consists of at least six distinct conformations that exchange on the kHz time scale. A total of 66 model structures were evaluated, and six were identified as being consistent with experimental 13C NMR data. All feasible structures have very similar carbon and oxygen positions and differ most significantly in OH hydrogen orientations. A concerted rearrangement of OH hydrogens is proposed to account for the observed dynamic disorder. This rearrangement is accompanied by smaller changes in ring conformation and is slow enough to be observed on the NMR time scale due to severe steric crowding among ring substituents. The relatively minor differences in non-hydrogen atom positions in the final structures suggest that characterization of a complete crystal structure by X-ray powder d...

Summary (2 min read)

Introduction.

  • For the past century the insights provided by crystallography have help guide the development of science in a remarkably wide range of disciplines.
  • A key early development in the pursuit of crystal structure by NMR was the ability to characterize molecular conformation by solid-state NMR.
  • Many materials form solids containing molecules that are partially disordered or that consist of mixtures of several lattice types (i.e. mixed phase materials).
  • Conformational characterization for each unique structure in these solids is valuable because such structures provide the initial models needed for crystal structure determination by powder diffraction methods.
  • Accordingly, the aim of the present study is to characterize the molecular conformations of one such disordered solid, namely, methyl α-L-rhamnofuranoside .

Experimental and Theoretical Methods.

  • Hz per point was obtained in the acquisition dimension.
  • Of equal importance, the C2 13 C tensor data computed using this conformation was found to agree well with experimental data.
  • To further establish conformations, all combinations of conformations about C4-O, C5-C6 and C6-O had to be considered because none can be considered isolated from the other sites.
  • Overall, this process required consideration of 66 conformations rather than the 243 structures that would have been evaluated if isolated regions had not been utilized.

Characterizing disorder.

  • Such NMR spectra can arise from either static or dynamic disorder of the individual molecules.
  • Fortunately, solids with Z' > 1 can usually be distinguished from disordered materials since they contain resonances that are relatively insensitive to temperature variations and that occur in approximately 1:1 ratios.
  • The disorder was found to be dynamic based upon spectra acquired over a range of spinning speeds from 2.3 -4.8 kHz .
  • In these experiments, the number of resonances per position was found to vary with spinning speed.
  • This result is consistent with conformational exchanges that occur at rates comparable to the spinning speed with significant differences observed at C2, C3, C4, and C8.

Assignment of 1 H and 13 C chemical shifts.

  • Accurate structural studies require that all chemical shifts be correctly assigned to the corresponding nuclei.
  • 14 Since these assignments were based exclusively on 1D data, new solution phase analyses were performed to verify all assignments.
  • These new data were conducted in CD 3 OD and rely primarily on DQF-COSY data (see experimental).
  • All assignments and important DQF-COSY correlations are listed in Table 1 .
  • All chemical shift assignments in solid methyl α-L-rhamnofuranoside were made by comparison to those in solution.

Conformational predictions.

  • Prior work has demonstrated that accurate conformations can be predicted from 13 C chemical shift tensor information.
  • In disordered samples, comparison between experimental and calculated tensor shift values is challenging because multiple resonances are observed for each 13 C site in the molecule and identifying one particular set of lines arising from a single conformation can be difficult.
  • Thus, most of the experimental values for a given position display differences less than the error in the calculated values.
  • When each of these experimental datasets was compared to the model structures, six conformations were found to be compatible with the experimental data.
  • The structures selected show that the disorder in methyl α-L-rhamnofuranoside consists primarily of disorder in hydrogen positions.

Conclusions.

  • Solid-state NMR 13 C tensor data are paired with computational methods to establish molecular conformation in a small carbohydrate that is dynamically disordered in the solid state and unsuitable for conventional single crystal diffraction techniques.
  • The solid consists of at least six conformations that interconvert on the kHz timescale.
  • An evaluation of dozens of candidate structures by computational methods identifies six conformations that are consistent with the NMR data.
  • These structures differ primarily at OH hydrogen positions with heavier atoms exhibiting only minor differences that appear to arise from changes in ring conformation that accompany the OH hydrogen reorientations.
  • This study serves to define the structure in the crystallographic asymmetric unit and to identify favorable intramolecular hydrogen bonding arrangements.

Did you find this useful? Give us your feedback

Figures (12)

Content maybe subject to copyright    Report

http://www.diva-portal.org
Preprint
This is the submitted version of a paper published in Journal of Physical Chemistry A.
Citation for the original published paper (version of record):
Harper, J K., Tishler, D., Richardson, D., Lokvam, J., Pendrill, R. et al. (2013)
Solid-State NMR Characterization of the Molecular Conformation in Disordered Methyl alpha-
L-Rhamnofuranoside.
Journal of Physical Chemistry A, 117(26): 5534-5541
http://dx.doi.org/10.1021/jp4036666
Access to the published version may require subscription.
N.B. When citing this work, cite the original published paper.
Permanent link to this version:
http://urn.kb.se/resolve?urn=urn:nbn:se:su:diva-92801

1
Solid-state NMR Characterization of Molecular Conformation in Disordered Methyl α
L–rhamnofuranoside.
James K. Harper,*
a
Derek Tishler,
b
David Richardson,
a
John Lokvam,
c
Robert Pendrill,
d
ran Widmalm.
d
a
University of Central Florida, Department of Chemistry, 4000 Central Florida Blvd.,
Orlando, FL 32816, USA.
b
University of Central Florida, Department of Physics, Orlando, FL 32816, USA.
c
University of California Berkeley, Department of Biology, Berkeley, CA 94720, USA.
d
Department of Organic Chemistry, Arrhenius Laboratory, Stockholm University, S-106
91, Stockholm, Sweden.

2
Solid-state NMR Characterization of Molecular Conformation in Disordered Methyl α
L–rhamnofuranoside.
Abstract.
A combination of solid-state
13
C NMR tensor data and DFT computational
methods are utilized to predict conformation in disordered methyl α–L–
rhamnofuranoside. This previously uncharacterized solid is found to be crystalline and
consists of at least six distinct conformations that exchange on the kHz timescale. A total
of 66 model structures were evaluated and six were identified as being consistent with
experimental
13
C NMR data. All feasible structures have very similar heavy atom
positions and differ most significantly in OH hydrogen orientations. A concerted
rearrangement of OH hydrogens is proposed to account for the observed dynamic
disorder. This rearrangement is accompanied by smaller changes in ring conformation
and is slow enough to be observed on the NMR timescale due to severe steric crowding
among ring substituents. The relatively minor heavy atom differences in the final
structures suggest that characterization of a complete crystal structure by x-ray powder
diffraction may be feasible.
Keywords.
13
C tensor principal values, NMR crystallography.

3
Introduction.
For the past century the insights provided by crystallography have help guide the
development of science in a remarkably wide range of disciplines. Several well-
established diffraction techniques are now available for determining structure in materials
that form crystals and, to a lesser extent, microcrystalline powders. Recently, the
methods of solid-state NMR have been directed toward the problem of crystallographic
characterization and the prospect of performing “NMR crystallography” has become
feasible.
1
Presently, most NMR crystallographic studies emphasize the NMR
characterization of the molecular structure of an individual molecule or the repeating unit
in framework materials.
2
The longer-range lattice order needed to identify a space group
is usually obtained independently from x-ray powder diffraction methods that rely on the
NMR determined structure as a starting model. However, alternative methods
3
including
theoretical crystal structure prediction methods have also been found to be capable of
also providing the lattice structure.
2b,4
Crystallographic analysis by NMR spectroscopy is appealing because NMR is
capable of characterizing a diverse variety of solids that can be difficult to treat by
conventional diffraction methods. A key early development in the pursuit of crystal
structure by NMR was the ability to characterize molecular conformation by solid-state
NMR.
5
Such structural characterizations can now be achieved using a variety of methods
and have been used to elucidate structure in proteins,
6
inorganic materials
2a,2b,2h,2i,2l,2m
and
smaller organic molecules.
7
Presently, these studies have largely been limited to well-
ordered crystalline solids and extension to more challenging materials is desirable. For
example, many materials form solids containing molecules that are partially disordered or

4
that consist of mixtures of several lattice types (i.e. mixed phase materials). In these
cases NMR has the potential to provide molecular conformation for each unique structure
found in the solid because several resonances are usually observed for each atomic
position due to the multiple distinct conformations present in the solid.
Solid-state NMR is remarkably sensitive to even minor differences in structure
and such variations, when present, often result in new resonances for a given site. Thus,
disordered or mixed phase solids usually exhibit several resonances for each atom in the
molecule. Conformational characterization for each unique structure in these solids is
valuable because such structures provide the initial models needed for crystal structure
determination by powder diffraction methods. Accordingly, the aim of the present study
is to characterize the molecular conformations of one such disordered solid, namely,
methyl αL–rhamnofuranoside (Figure 1). Presently, there is no known crystal structure
for methyl αL–rhamnofuranoside and this study will provide the structure of the
crystallographic asymmetric unit for each conformation present. Inspection of the
13
C
NMR spectrum of solid methyl α–L–rhamnofuranoside shows disorder at several of the
carbons and narrow lines characteristic of a crystalline solid. Here,
13
C tensor principal
values are measured for all sites. Assignment of conformation is accomplished using a
previously described approach
5a
that evaluates a wide variety of possible conformations
and retains structures having computed tensors that agree with experimental data.

Citations
More filters
Journal ArticleDOI
04 Dec 2018-Langmuir
TL;DR: CO-loaded PbSDB and CdSDB were characterized using variable-temperature (VT) 13C solid-state nuclear magnetic resonance (SSNMR) spectroscopy to probe variations in binding behavior and the CO adsorption mechanism was concluded to be analogous to that of CO2.
Abstract: Metal–organic frameworks (MOFs) are promising materials for greener carbon monoxide (CO) capture and separation processes. SDB-based (SDB = 4,4’-sulfonyldibenzoate) MOFs are particularly attractive due to their remarkable gas adsorption capacity under humid conditions. However, to the best of our knowledge, their CO adsorption abilities have yet to be investigated. In this report, CO-loaded PbSDB and CdSDB were characterized using variable-temperature (VT) 13C solid-state nuclear magnetic resonance (SSNMR) spectroscopy. These MOFs readily captured CO, with the adsorbed CO exhibiting dynamics as indicated by the temperature-dependent changes in the SSNMR spectra. Spectral simulations revealed that the CO simultaneously undergoes a localized wobbling about the adsorption site and a nonlocalized hopping between adjacent adsorption sites. The wobbling and hopping angles were also found to be temperature-dependent. From the appearance of the VT spectra and the extracted motional data, the CO adsorption mechani...

9 citations

Reference EntryDOI
15 Sep 2014
TL;DR: The chemical-shift tensor provides an exquisitely sensitive measure of the electronic environment around a nucleus The tensor is defined by a real symmetric 3'×'3 matrix with six measurable components Single crystals are usually required to measure all six components whereas three shifts per nucleus are measurable in powders as mentioned in this paper.
Abstract: The chemical-shift tensor provides an exquisitely sensitive measure of the electronic environment around a nucleus The tensor is defined by a real symmetric 3 × 3 matrix with six measurable components Single crystals are usually required to measure all six components whereas three shifts per nucleus are measurable in powders These powder data, known as principal values, are defined as δ11 ≥ δ22 ≥ δ33 Presently, most 2D experiments measuring tensor data display the 1D isotropic spectrum along one axis and the tensor patterns for each resonance along the second dimension Experiments most frequently used are two-dimensional phase-adjusted spinning sideband (2D PASS), phase corrected magic angle turning (PHORMAT), FIREMAT (five π replicated magic angle turning), RAI (recoupling of anistropic information), SUPER (separation of undistorted powder patterns by effortless recoupling), and CSA (chemical shift anisotropy) amplification Very few simple relationships exist between principal values and structure, thus comparison with model structures from computational methods has become important Recently, these computational methods have been used to predict structure in solids that are intractable to traditional methods Tensor data have also been found to be extremely sensitive to crystal structure and can therefore be used to further refine some structures, including single crystal structures The prospect of predicting entire crystal structures from 13C tensor data and computational methods is now realistic, and a few structures have recently been determined without diffraction data

5 citations

Journal ArticleDOI
TL;DR: In this paper, two theoretical methods are evaluated for their ability to assign 15 N shifts from guanosine dihydrate to one of the two independent molecules present in the lattice.
Abstract: The ability to theoretically predict accurate NMR chemical shifts in solids is increasingly important due to the roles such shifts play in selecting among proposed model structures. Here, two theoretical methods are evaluated for their ability to assign 15 N shifts from guanosine dihydrate to one of the two independent molecules present in the lattice. The NMR data consist of 15 N shift tensors from 10 resonances. Analysis using periodic boundary or fragment methods consider a benchmark dataset to estimate errors and predict uncertainties of 5.6 and 6.2 ppm, respectively. Despite this high accuracy, only one of the five sites were confidently assigned to a specific molecule of the asymmetric unit. This limitation is not due to negligible differences in experimental data, as most sites exhibit differences of > 6.0 ppm between pairs of resonances representing a given position. Instead, the theoretical methods are insufficiently accurate to make assignments at most positions.

4 citations

Journal ArticleDOI
TL;DR: The analysis of 1H NMR data in solution can establish the connection between the macro level (experimental) and the sub-micro level (theoretical), which is not so apparent to us and appears to be more appropriate than the thermodynamic stability criterion in conformational analysis studies.
Abstract: Chloroquine (CQ) and hydroxychloroquine (HCQ) have been standard antimalarial drugs since the early 1950s, and very recently, the possibility of their use for the treatment of COVID-19 patients has been considered. To understand the drug mode of action at the submicroscopic level (atoms and molecules), molecular modeling studies with the aid of computational chemistry methods have been of great help. A fundamental step in such theoretical investigations is the knowledge of the predominant drug molecular structure in solution, which is the real environment for the interaction with biological targets. Our strategy to access this valuable information is to perform density functional theory (DFT) calculations of 1H NMR chemical shifts for several plausible molecular conformers and then find the best match with experimental NMR profile in solution (since it is extremely sensitive to conformational changes). Through this procedure, after optimizing 30 trial distinct molecular structures (ωB97x-D/6-31G(d,p)-PCM level of calculation), which may be considered representative conformations, we concluded that the global minimum (named M24), stabilized by an intramolecular N-H hydrogen bond, is not likely to be observed in water, chloroform, and dimethyl sulfoxide (DMSO) solution. Among fully optimized conformations (named M1 to M30, and MD1 and MD2), we found M12 (having no intramolecular H-bond) as the most probable structure of CQ and HCQ in water solution, which is a good approximate starting geometry in drug-receptor interaction simulations. On the other hand, the preferred CQ and HCQ structure in chloroform (and CQ in DMSO-d6) solution was assigned as M8, showing the solvent effects on conformational preferences. We believe that the analysis of 1H NMR data in solution can establish the connection between the macro level (experimental) and the sub-micro level (theoretical), which is not so apparent to us and appears to be more appropriate than the thermodynamic stability criterion in conformational analysis studies.

1 citations

01 Jan 2013
TL;DR: In this paper, the conformational preferences of several oligosaccharides are investigated using a combination of NMR spectroscopy and molecular dynamics simulations, focusing on the torsion angles as...
Abstract: The conformational preferences of several oligosaccharides are investigated herein using a combination of NMR spectroscopy and molecular dynamics (MD) simulations, focusing on the torsion angles as ...
References
More filters
Journal ArticleDOI
TL;DR: In this article, a semi-empirical exchange correlation functional with local spin density, gradient, and exact exchange terms was proposed. But this functional performed significantly better than previous functionals with gradient corrections only, and fits experimental atomization energies with an impressively small average absolute deviation of 2.4 kcal/mol.
Abstract: Despite the remarkable thermochemical accuracy of Kohn–Sham density‐functional theories with gradient corrections for exchange‐correlation [see, for example, A. D. Becke, J. Chem. Phys. 96, 2155 (1992)], we believe that further improvements are unlikely unless exact‐exchange information is considered. Arguments to support this view are presented, and a semiempirical exchange‐correlation functional containing local‐spin‐density, gradient, and exact‐exchange terms is tested on 56 atomization energies, 42 ionization potentials, 8 proton affinities, and 10 total atomic energies of first‐ and second‐row systems. This functional performs significantly better than previous functionals with gradient corrections only, and fits experimental atomization energies with an impressively small average absolute deviation of 2.4 kcal/mol.

87,732 citations

Journal ArticleDOI
TL;DR: Numerical calculations on a number of atoms, positive ions, and molecules, of both open- and closed-shell type, show that density-functional formulas for the correlation energy and correlation potential give correlation energies within a few percent.
Abstract: A correlation-energy formula due to Colle and Salvetti [Theor. Chim. Acta 37, 329 (1975)], in which the correlation energy density is expressed in terms of the electron density and a Laplacian of the second-order Hartree-Fock density matrix, is restated as a formula involving the density and local kinetic-energy density. On insertion of gradient expansions for the local kinetic-energy density, density-functional formulas for the correlation energy and correlation potential are then obtained. Through numerical calculations on a number of atoms, positive ions, and molecules, of both open- and closed-shell type, it is demonstrated that these formulas, like the original Colle-Salvetti formulas, give correlation energies within a few percent.

84,646 citations

Journal ArticleDOI
TL;DR: A simple analytic representation of the correlation energy for a uniform electron gas, as a function of density parameter and relative spin polarization \ensuremath{\zeta}, which confirms the practical accuracy of the VWN and PZ representations and eliminates some minor problems.
Abstract: We propose a simple analytic representation of the correlation energy ${\mathrm{\ensuremath{\varepsilon}}}_{\mathit{c}}$ for a uniform electron gas, as a function of density parameter ${\mathit{r}}_{\mathit{s}}$ and relative spin polarization \ensuremath{\zeta}. Within the random-phase approximation (RPA), this representation allows for the ${\mathit{r}}_{\mathit{s}}^{\mathrm{\ensuremath{-}}3/4}$ behavior as ${\mathit{r}}_{\mathit{s}}$\ensuremath{\rightarrow}\ensuremath{\infty}. Close agreement with numerical RPA values for ${\mathrm{\ensuremath{\varepsilon}}}_{\mathit{c}}$(${\mathit{r}}_{\mathit{s}}$,0), ${\mathrm{\ensuremath{\varepsilon}}}_{\mathit{c}}$(${\mathit{r}}_{\mathit{s}}$,1), and the spin stiffness ${\mathrm{\ensuremath{\alpha}}}_{\mathit{c}}$(${\mathit{r}}_{\mathit{s}}$)=${\mathrm{\ensuremath{\partial}}}^{2}$${\mathrm{\ensuremath{\varepsilon}}}_{\mathit{c}}$(${\mathit{r}}_{\mathit{s}}$, \ensuremath{\zeta}=0)/\ensuremath{\delta}${\mathrm{\ensuremath{\zeta}}}^{2}$, and recovery of the correct ${\mathit{r}}_{\mathit{s}}$ln${\mathit{r}}_{\mathit{s}}$ term for ${\mathit{r}}_{\mathit{s}}$\ensuremath{\rightarrow}0, indicate the appropriateness of the chosen analytic form. Beyond RPA, different parameters for the same analytic form are found by fitting to the Green's-function Monte Carlo data of Ceperley and Alder [Phys. Rev. Lett. 45, 566 (1980)], taking into account data uncertainties that have been ignored in earlier fits by Vosko, Wilk, and Nusair (VWN) [Can. J. Phys. 58, 1200 (1980)] or by Perdew and Zunger (PZ) [Phys. Rev. B 23, 5048 (1981)]. While we confirm the practical accuracy of the VWN and PZ representations, we eliminate some minor problems with these forms. We study the \ensuremath{\zeta}-dependent coefficients in the high- and low-density expansions, and the ${\mathit{r}}_{\mathit{s}}$-dependent spin susceptibility. We also present a conjecture for the exact low-density limit. The correlation potential ${\mathrm{\ensuremath{\mu}}}_{\mathit{c}}^{\mathrm{\ensuremath{\sigma}}}$(${\mathit{r}}_{\mathit{s}}$,\ensuremath{\zeta}) is evaluated for use in self-consistent density-functional calculations.

21,353 citations

Journal ArticleDOI
TL;DR: In this article, a unique mean plane is defined for a general monocyclic puckered ring, which is described by amplitude and phase coordinates which are generalizations of those introduced for cyclopentane by Kilpatrick, Pitzer, and Spitzer.
Abstract: A unique mean plane is defined for a general monocyclic puckered ring. The geometry of the puckering relative to this plane is described by amplitude and phase coordinates which are generalizations of those introduced for cyclopentane by Kilpatrick, Pitzer, and Spitzer. Unlike earlier treatments based on torsion angles, no mathematical approximations are involved. A short treatment of the four-, five-, and six-membered ring demonstrates the usefulness of this concept. Finally, an example is given of the analysis of crystallographic structural data in terms of these coordinates. Although the nonplanar character of closed rings in many cyclic compounds has been widely recognized for many years, there remain some difficulties in its quantitative specification. An important first step was taken by Kilpatrick, Pitzer, and Spitzer in their 1947 discussion of the molecular structure of cyclopentane.' Starting with the normal modes of out-of-plane motions of a planar regular pentagon,* they pointed out that displacement of the j t h carbon atom perpendicular to the plane could be written 2 112 zj = (/'SI 4 COS (2+ + 4 n ( j 11/51 (11 where q is a puckering amplitude and $ is a phase angle describing various kinds of puckering. By considering changes in an empirical potential energy for displacements perpendicular to the original planar form, they gave reasons to believe that the lowest energy was obtained for a nonzero value of q (finite puckering) but that this minimum was largely independent of $. Motion involving a change in fi at constant q was described as pseudorotation. Subsequent refinement of this work has involved models in which constraints to require constant bond lengths are imposed3q4 and extensions to larger rings5-' and some heterocyclic systems are considered.* Although the correctness of the model of Kilpatrick, et a f . , I and the utility of the (q. $) coordinate system is generally accepted, application to a general five-membered ring with unequal bond lengths and angles is not straightforward. Given the Cartesian coordinates for the five atoms (as from a crystal structure), determination of puckering displacements z, requires specification of the plane z = 0. A least-squares choice (minimization of Zz i2) is one possibility, but the five displacements relative to this plane cannot generally be expressed in terms of two parameters q and $ according to eq 1. An attempt to define a generalized set of puckering cordinates which avoids these difficulties was made by Geise, Altona, Romers, and S~ndara l ingam.~l ' Their quantitative description of puckering in five-membered rings involves the five torsion angles 0, rather than displacements perpendicular to some plane. These torsion angles are directly derivable from the atomic coordinates and are all zero in the planar form. They proposed a relationship of the form\

6,526 citations

Journal ArticleDOI
TL;DR: In this article, a simple two pulse phase modulation (TPPM) scheme was proposed to reduce the residual linewidths arising from insufficient proton decoupling power in double resonance magic angle spinning (MAS) experiments.
Abstract: A simple two pulse phase modulation (TPPM) scheme greatly reduces the residual linewidths arising from insufficient proton decoupling power in double resonance magic angle spinning (MAS) experiments. Optimization of pulse lengths and phases in the sequence produces substantial improvements in both the resolution and sensitivity of dilute spins (e.g., 13C) over a broad range of spinning speeds at high magnetic field. The theoretical complications introduced by large homo‐ and heteronuclear interactions among the spins, as well as the amplitude modulation imposed by MAS, are explored analytically and numerically. To our knowledge, this method is the first phase‐switched sequence to exhibit improvement over continuous‐wave (cw) decoupling in a strongly coupled homogeneous spin system undergoing sample spinning.

2,044 citations

Frequently Asked Questions (1)
Q1. What are the contributions in this paper?

Chichester et al. this paper used solid-state NMR tensor data and computational methods to establish molecular conformation in a small carbohydrate that is dynamically disordered in the solid state and unsuitable for conventional single crystal diffraction techniques.