Solution‐Processed Metallic Conducting Polymer Films as Transparent Electrode of Optoelectronic Devices
TL;DR: These PEDOT:PSS films with conductivity and transparency comparable to ITO can replace ITO as the transparent electrode of optoelectronic devices.
Abstract: The conductivity of PEDOT:PSS films was significantly enhanced from 0.3 S cm(-1) to 3065 S cm(-1) through a treatment with dilute sulfuric acids. PEDOT:PSS films with a sheet resistance of 39 Ω sq(-1) and transparency of around 80% at 550 nm are obtained. These PEDOT:PSS films with conductivity and transparency comparable to ITO can replace ITO as the transparent electrode of optoelectronic devices.
Citations
More filters
••
TL;DR: Reducing dopant volume is found to be as important as optimizing carrier concentration when maximizing ZT in OSCs, and this stands in sharp contrast to ISCs, for which these parameters have trade-offs.
Abstract: The conversion efficiency of heat to electricity in thermoelectric materials depends on both their thermopower and electrical conductivity. It is now reported that, unlike their inorganic counterparts, organic thermoelectric materials show an improvement in both these parameters when the volume of dopant elements is minimized; furthermore, a high conversion efficiency is achieved in PEDOT:PSS blends.
1,366 citations
••
TL;DR: The fabrication of electronic devices based on organic materials, known as ’printed electronics’, is an emerging technology due to its unprecedented advantages involving fl exibility, light weight, and portability, which will ultimately lead to future ubiquitous applications.
Abstract: The fabrication of electronic devices based on organic materials, known as ’printed electronics’, is an emerging technology due to its unprecedented advantages involving fl exibility, light weight, and portability, which will ultimately lead to future ubiquitous applications. [ 1 ] The solution processability of semiconducting and metallic polymers enables the cost-effective fabrication of optoelectronic devices via high-throughput printing techniques. [ 2 ] These techniques require high-performance fl exible and transparent electrodes (FTEs) fabricated on plastic substrates, but currently, they depend on indium tin oxide (ITO) coated on plastic substrates. However, its intrinsic mechanical brittleness and inferior physical properties arising from lowtemperature ( T ) processing below the melting T of the plastic substrates (i.e., typically below 150 °C) have increased the demand for alternative FTE materials. [ 3 ]
825 citations
••
TL;DR: In this article, various physical and chemical approaches that can effectively improve the electrical conductivity of poly(3,4-ethylenedioxythiophene): poly(styrenesulfonic acid) (PEDOT:PSS) are summarized.
Abstract: The rapid development of novel organic technologies has led to significant applications of the organic electronic devices such as light-emitting diodes, solar cells, and field-effect transistors. There is a great need for conducting polymers with high conductivity and transparency to act as the charge transport layer or electrical interconnect in organic devices. Poly(3,4-ethylenedioxythiophene): poly(styrenesulfonic acid) (PEDOT:PSS), well-known as the most remarkable conducting polymer, has this role owing to its good film-forming properties, high transparency, tunable conductivity, and excellent thermal stability. In this Review, various of interesting physical and chemical approaches that can effectively improve the electrical conductivity of PEDOT:PSS are summarized, focusing especially on the mechanism of the conductivity enhancement as well as applications of PEDOT:PSS films. Prospects for future research efforts are also provided. It is expected that PEDOT:PSS films with high conductivity and transparency could be the focus of future organic electronic materials breakthroughs.
751 citations
••
TL;DR: An ionic touch panel based on a polyacrylamide hydrogel containing lithium chloride salts is demonstrated, which can be operated under more than 1000% areal strain without sacrificing its functionalities.
Abstract: Because human-computer interactions are increasingly important, touch panels may require stretchability and biocompatibility in order to allow integration with the human body. However, most touch panels have been developed based on stiff and brittle electrodes. We demonstrate an ionic touch panel based on a polyacrylamide hydrogel containing lithium chloride salts. The panel is soft and stretchable, so it can sustain a large deformation. The panel can freely transmit light information because the hydrogel is transparent, with 98% transmittance for visible light. A surface-capacitive touch system was adopted to sense a touched position. The panel can be operated under more than 1000% areal strain without sacrificing its functionalities. Epidermal touch panel use on skin was demonstrated by writing words, playing a piano, and playing games.
749 citations
••
TL;DR: In this review, thermoelectric properties of conducting polymers and small molecules are summarized, with recent progresses in materials, measurements and devices highlighted.
Abstract: The abundance of solar thermal energy and the widespread demands for waste heat recovery make thermoelectric generators (TEGs) very attractive in harvesting low-cost energy resources. Meanwhile, thermoelectric refrigeration is promising for local cooling and niche applications. In this context there is currently a growing interest in developing organic thermoelectric materials which are flexible, cost-effective, eco-friendly and potentially energy-efficient. In particular, the past several years have witnessed remarkable progress in organic thermoelectric materials and devices. In this review, thermoelectric properties of conducting polymers and small molecules are summarized, with recent progresses in materials, measurements and devices highlighted. Prospects and suggestions for future research efforts are also presented. The organic thermoelectric materials are emerging candidates for green energy conversion.
727 citations
References
More filters
••
TL;DR: The direct synthesis of large-scale graphene films using chemical vapour deposition on thin nickel layers is reported, and two different methods of patterning the films and transferring them to arbitrary substrates are presented, implying that the quality of graphene grown by chemical vapours is as high as mechanically cleaved graphene.
Abstract: Problems associated with large-scale pattern growth of graphene constitute one of the main obstacles to using this material in device applications. Recently, macroscopic-scale graphene films were prepared by two-dimensional assembly of graphene sheets chemically derived from graphite crystals and graphene oxides. However, the sheet resistance of these films was found to be much larger than theoretically expected values. Here we report the direct synthesis of large-scale graphene films using chemical vapour deposition on thin nickel layers, and present two different methods of patterning the films and transferring them to arbitrary substrates. The transferred graphene films show very low sheet resistance of approximately 280 Omega per square, with approximately 80 per cent optical transparency. At low temperatures, the monolayers transferred to silicon dioxide substrates show electron mobility greater than 3,700 cm(2) V(-1) s(-1) and exhibit the half-integer quantum Hall effect, implying that the quality of graphene grown by chemical vapour deposition is as high as mechanically cleaved graphene. Employing the outstanding mechanical properties of graphene, we also demonstrate the macroscopic use of these highly conducting and transparent electrodes in flexible, stretchable, foldable electronics.
10,033 citations
••
TL;DR: An overview of 3,4-ethylenedioxythiophene (PEDT) and its derivatives can be found in this article, along with a description of the broad array of properties accessible and a set of the more prominent applications in which they can be utilized.
Abstract: An overview of one of the most successful conducting polymers, poly(3,4-ethylenedioxythiophene) (PEDT) and its derivatives, is presented, detailing its early development, the synthesis of numerous hybrid and derivative materials, along with a description of the broad array of properties accessible and a description of a set of the more prominent applications in which they can be utilized. Synthetic flexibility and facility is the key to the many new 3,4-ethylenedioxythiophene- (EDT-) based monomers, oligomers, and (co) polymers. These (co) polymers provide highly conducting and especially stable doped states, a range of optical properties with electronic bandgaps varying across the entire visible spectrum, and enhanced redox properties, making them useful for numerous electrochemical devices. Present and future applications for PEDT that are discussed include static charge dissipation films and electrode materials in solid electrolyte capacitors.
3,080 citations
••
TL;DR: These experiments demonstrate solution-processed GO films have potential as transparent electrodes and sheet resistance and optical transparency using different reduction treatments.
Abstract: Processable, single-layered graphene oxide (GO) is an intriguing nanomaterial with tremendous potential for electronic applications. We spin-coated GO thin-films on quartz and characterized their sheet resistance and optical transparency using different reduction treatments. A thermal graphitization procedure was most effective, producing films with sheet resistances as low as 102 −103 Ω/square with 80% transmittance for 550 nm light. Our experiments demonstrate solution-processed GO films have potential as transparent electrodes.
3,011 citations
••
TL;DR: Characteristics of the fabrication of ultrathin, transparent, optically homogeneous, electrically conducting films of pure single-walled carbon nanotubes indicate broad applicability of the films for electrical coupling in photonic devices.
Abstract: We describe a simple process for the fabrication of ultrathin, transparent, optically homogeneous, electrically conducting films of pure single-walled carbon nanotubes and the transfer of those films to various substrates. For equivalent sheet resistance, the films exhibit optical transmittance comparable to that of commercial indium tin oxide in the visible spectrum, but far superior transmittance in the technologically relevant 2- to 5-micrometer infrared spectral band. These characteristics indicate broad applicability of the films for electrical coupling in photonic devices. In an example application, the films are used to construct an electric field-activated optical modulator, which constitutes an optical analog to the nanotube-based field effect transistor.
2,958 citations
••
TL;DR: In this article, the authors demonstrate solution-processed transparent electrodes consisting of random meshes of metal nanowires that exhibit an optical transparency equivalent to or better than that of metal-oxide thin films for the same sheet resistance.
Abstract: Transparent conductive electrodes are important components of thin-film solar cells, light-emitting diodes, and many display technologies. Doped metal oxides are commonly used, but their optical transparency is limited for films with a low sheet resistance. Furthermore, they are prone to cracking when deposited on flexible substrates, are costly, and require a high-temperature step for the best performance. We demonstrate solution-processed transparent electrodes consisting of random meshes of metal nanowires that exhibit an optical transparency equivalent to or better than that of metal-oxide thin films for the same sheet resistance. Organic solar cells deposited on these electrodes show a performance equivalent to that of devices based on a conventional metal-oxide transparent electrode.
1,819 citations