scispace - formally typeset
Journal ArticleDOI

Solvent engineering for high-quality perovskite solar cell with an efficiency approaching 20%

Reads0
Chats0
TLDR
In this paper, a ternary-mixed-solvent method for the growth of high-quality [Cs0.05(MA0.17FA0.95Pb(I0.83)0.3] cation-anion-mixed perovskite films by introducing N-methyl-2-pyrrolidone (NMP) into the precursor mixed solution was developed.
About
This article is published in Journal of Power Sources.The article was published on 2017-10-15. It has received 58 citations till now. The article focuses on the topics: Perovskite solar cell & Perovskite (structure).

read more

Citations
More filters
Journal ArticleDOI

Improving the Stability and Monodispersity of Layered Cesium Lead Iodide Perovskite Thin Films by Tuning Crystallization Dynamics

TL;DR: In this paper, the authors showed that α-CsPbI3 ((C4H9NH3)2Csn-1PbnI3n+1) with nominal layer thicknesses of n = 1, 2, 3, and 4 can be deposited at temperatures as low as 100 °C, substantially below the phase-transition temperature of bulk α-CpbII3, and they demonstrated that incorporating solvents with high complexation strength into the precursor solution promotes the formation of intermediate phases within the thin film, slowing down LHP
Journal ArticleDOI

Facile synthesis of triphenylamine-based hole-transporting materials for planar perovskite solar cells

TL;DR: In this paper, three small-molecule triphenylamine-based hole-transporting materials are easily synthesized by using commercially available and inexpensive starting reagents as a precursor.
Journal ArticleDOI

Minimizing voltage deficit in Methylammonium-Free perovskite solar cells via surface reconstruction

TL;DR: In this article , a surface reconstruction strategy to constituted 2D/3D heterojunction via imidazole hydrobromide post-treatment is proposed to maximize the open circuit voltage and thus the power conversion efficiency of perovskite solar cells.
Journal ArticleDOI

The synergistic effect of dimethyl sulfoxide vapor treatment and C-60 electron transporting layer towards enhancing current collection in mixed-ion inverted perovskite solar cells

TL;DR: Inverted perovskite solar cells (PSCs) have been introduced as better candidate for roll-to-roll printing and scaleup than their conventional configuration counterparts, while their fabrication is....
Journal ArticleDOI

Laser-Induced Optoelectronic and Crystallographic Tuning of Methyl Ammonium Iodobismuthate Perovskite for Improved Performance of Sandwich-Type Photodetectors

TL;DR: For the development of high performance perovskite-based photodetectors, it is required that the optical and crystallographic properties as discussed by the authors are enhanced through their modificat...
References
More filters
Journal ArticleDOI

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

TL;DR: Two organolead halide perovskite nanocrystals were found to efficiently sensitize TiO(2) for visible-light conversion in photoelectrochemical cells, which exhibit strong band-gap absorptions as semiconductors.
Journal ArticleDOI

Sequential deposition as a route to high-performance perovskite-sensitized solar cells

TL;DR: A sequential deposition method for the formation of the perovskite pigment within the porous metal oxide film that greatly increases the reproducibility of their performance and allows the fabrication of solid-state mesoscopic solar cells with unprecedented power conversion efficiencies and high stability.
Journal ArticleDOI

Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber.

TL;DR: In this article, transient absorption and photoluminescence-quenching measurements were performed to determine the electron-hole diffusion lengths, diffusion constants, and lifetimes in mixed halide and triiodide perovskite absorbers.
Journal ArticleDOI

Efficient planar heterojunction perovskite solar cells by vapour deposition

TL;DR: It is shown that perovskite absorbers can function at the highest efficiencies in simplified device architectures, without the need for complex nanostructures.
Journal Article

Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber

TL;DR: In this paper, transient absorption and photoluminescence-quenching measurements were performed to determine the electron-hole diffusion lengths, diffusion constants, and lifetimes in mixed halide and triiodide perovskite absorbers.
Related Papers (5)
Trending Questions (1)
Where to buy perovskite solar panels?

The research presented here provides a facile, low-cost and highly efficient way for the preparation of perovskite solar cells.