Sorption of Cu (II) Ions by Adsorption using Orange Peel
01 May 2021-Vol. 1913, Iss: 1, pp 012090
About: The article was published on 2021-05-01 and is currently open access. It has received 2 citations till now. The article focuses on the topics: Sorption & Orange (colour).
Citations
More filters
TL;DR: In this paper , the adsorption kinetics for Cu(II) ions on beads followed a pseudo-second-order kinetic model, with a very good correlation in all cases.
Abstract: CABs (Ca alginate beads), AVCABs (Aloe vera Ca alginate beads), and AVMNCABs (Aloe-vera functionalized magnetic nanoparticles entrapped Ca alginate beads) were developed as adsorbents for the removal of Cu(II) from aqueous solutions. The materials were characterized using Fourier-transform infrared (FTIR) spectroscopy, high-resolution scanning electron microscopic (HR-SEM) analysis, X-ray diffraction (XRD), energy-dispersive X-ray (EDX) spectroscopy, and a vibrating-sample magnetometer (VSM). The effect of several parameters, such as pH, time, temperature, adsorbent dose, etc., were investigated. The adsorption isotherm of Cu(II) was adjusted best to the Langmuir model. The maximum adsorption capacities were 111.11 mg/g, 41.66 mg/g, and 15.38 mg/g for AVMNCABs, AVCABs, and CABs, respectively. The study of the adsorption kinetics for Cu(II) ions on beads followed a pseudo-second-order kinetic model, with a very good correlation in all cases. The adsorption studies used a spectrophotometric method, dealing with the reaction of Cu(II) with KSCN and variamine blue.
3 citations
References
More filters
TL;DR: Alkalinity measurements are used in the interpretation and control of water and wastewater treatment processes and can be interpreted in terms of specific substances only when the chemical composition of the sample is known.
Abstract: 1. Discussion Alkalinity of a water is its acid-neutralizing capacity. It is the sum of all the titratable bases. The measured value may vary significantly with the end-point pH used. Alkalinity is a measure of an aggregate property of water and can be interpreted in terms of specific substances only when the chemical composition of the sample is known. Alkalinity is significant in many uses and treatments of natural waters and wastewaters. Because the alkalinity of many surface waters is primarily a function of carbonate, bicarbonate, and hydroxide content, it is taken as an indication of the concentration of these constitutents. The measured values also may include contributions from borates, phosphates, silicates, or other bases if these are present. Alkalinity in excess of alkaline earth metal concentrations is significant in determining the suitability of a water for irrigation. Alkalinity measurements are used in the interpretation and control of water and wastewater treatment processes. Raw domestic wastewater has an alkalinity less than, or only slightly greater than, that of the water supply. Properly operating anaerobic digesters typically have supernatant alkalinities in the range of 2000 to 4000 mg calcium carbonate (CaCO3)/L. 1
7,510 citations
TL;DR: In this article, an extensive list of low-cost adsorbents (prepared by utilizing different types of waste materials) from vast literature has been compiled and their adsorption capacities for various aquatic pollutants as available in the literature are presented.
1,044 citations
Book•
01 Aug 1981
TL;DR: Process chemistry for water and wastewater treatment as mentioned in this paper, Process Chemistry for Water and Wastewater treatment, Process chemistry for wastewater treatment, and process chemistry for drinking water treatment, کتابخانه دانشگاه علوم پزδکی و خدمات بهداشتی درمانی
Abstract: Process chemistry for water and wastewater treatment , Process chemistry for water and wastewater treatment , کتابخانه دانشگاه علوم پزشکی و خدمات بهداشتی درمانی کرمان
589 citations
TL;DR: In this paper, a review compiles the work conducted by various researchers over the last few decades on the use of various agricultural waste peels as adsorbents for the water and wastewater treatment.
570 citations
TL;DR: Papaya wood was evaluated as a new biosorbent of heavy metals in this article, and the affinity of papaya wood to biosorb metals was in the order of copper(II)>cadmium(II),>zinc(II).
513 citations