Spray-coated paper supercapacitors
08 Jul 2020-Vol. 4, Iss: 1, pp 1-7
TL;DR: In this paper, the authors demonstrate a sequential production protocol to fabricate supercapacitors including electrodes based on cellulose nanofibrils (CNF) and the conducting polymer PEDOT:PSS.
Abstract: The increasing demands to further electrify and digitalize our society set demands for a green electrical energy storage technology that can be scaled between very small, and heavily distributed electrical energy sources, to very large volumes. Such technology must be compatible with fast-throughput, large-volume and low-cost fabrication processes, such as using printing and coating techniques. Here, we demonstrate a sequential production protocol to fabricate supercapacitors including electrodes based on cellulose nanofibrils (CNF) and the conducting polymer PEDOT:PSS. Thin and lightweight paper electrodes, carbon adhesion layers and the gel electrolyte are fabricated using spray coating, screen printing, and bar coating, respectively. These all solid-state supercapacitors are flexible, mechanically robust and exhibit a low equivalent series resistance (0.22 Ω), thus resulting in a high power density (∼104 W/kg) energy technology. The supercapacitors are combined and connected to a power management circuit to demonstrate a smart packaging application. This work shows that operational and embedded supercapacitors can be manufactured in a manner to allow for the integration with, for instance smart packaging solutions, thus enabling powered, active internet-of-things (IoT) devices in a highly distributed application.
Citations
More filters
16 Nov 2020
TL;DR: In this paper, the recent progress of advanced micro-supercapacitors in fabrication strategies, structural design, electrode materials design and function, and integrated applications, where typical examples are highlighted and analyzed.
Abstract: The rapid development of wearable, highly integrated, and flexible electronics has stimulated great demand for on-chip and miniaturized energy storage devices. By virtue of their high power density and long cycle life, micro-supercapacitors (MSCs), especially those with interdigital structures, have attracted considerable attention. In recent years, tremendous theoretical and experimental explorations have been carried out on the structures and electrode materials of MSCs, aiming to obtain better mechanical and electrochemical properties. The high-performance MSCs can be used in many fields, such as energy storage and medical assistant examination. Here, this review focuses on the recent progress of advanced MSCs in fabrication strategies, structural design, electrode materials design and function, and integrated applications, where typical examples are highlighted and analyzed. Furthermore, the current challenges and future development directions of advanced MSCs are also discussed.
123 citations
30 Sep 2020
TL;DR: In this paper, the status, key challenges and opportunities for the field of next-generation flexible devices are elaborated in terms of materials, fabrication and specific applications, where the definition of flexibility differs from application to application.
Abstract: The concept of flexible electronics has been around for several decades. In principle, anything thin or very long can become flexible. While cables and wiring are the prime example for flexibility, it was not until the space race that silicon wafers used for solar cells in satellites were thinned to increase their power per weight ratio, thus allowing a certain degree of warping. This concept permitted the first flexible solar cells in the 1960s (Crabb and Treble, 1967). The development of conductive polymers (Shirakawa et al., 1977), organic semiconductors, and amorphous silicon (Chittick et al., 1969; Okaniwa et al., 1983) in the following decades meant huge strides toward flexibility and processability, and thus these materials became the base for electronic devices in applications that require bending, rolling, folding, and stretching, among other properties that cannot be fulfilled by conventional electronics (Cheng and Wagner, 2009) (Figure 1). Presently there is great interest in new materials and fabrication techniques which allow for highperformance scalable electronic devices to be manufactured directly onto flexible substrates. This interest has also extended to not only flexibility but also properties like stretchability and healability which can be achieved by utilizing elastomeric substrates with strong molecular interactions (Oh et al., 2016; Kang et al., 2018). Likewise, biocompatibility and biodegradability has been achieved through polymers that do not cause adverse effect to the body and can be broken down into smaller constituent pieces after utilization (Bettinger and Bao, 2010; Irimia-Vladu et al., 2010; Liu H. et al., 2019). This new progress is now enabling devices which can conform to complex and dynamic surfaces, such as those found in biological systems and bioinspired soft robotics. These next-generation flexible electronics open up a wide range of exciting new applications such as flexible lighting and display technologies for consumer electronics, architecture, and textiles, wearables with sensors that help monitor our health and habits, implantable electronics for improved medical imaging and diagnostics, as well as extending the functionality of robots and unmanned aircraft through lightweight and conformable energy harvesting devices and sensors. While conventional electronics are very capable of these functions, flexible electronics are intended to expand the mechanical features to adhere to novel form factors through hybrid strategies, or as standalone solutions where the application does not require high computation power, intended to be highly robust to deformation, low cost, thin, or disposable. The definition of flexibility differs from application to application. From bending and rolling for easier handling of large area photovoltaics, to conforming onto irregular shapes, folding, twisting, stretching, and deforming required for devices in electronic skin, all while maintaining device performance and reliability. While early progress and many important innovations have already been achieved, the field of flexible electronics has many challenges before it becomes part of our daily life. This represents a huge opportunity for scientific research and development to rapidly and considerably advance this area (Figure 2). In this article the status, key challenges and opportunities for the field of nextgeneration flexible devices are elaborated in terms of materials, fabrication and specific applications. Edited and Reviewed by: Jhonathan Prieto Rojas, King Fahd University of Petroleum and Minerals, Saudi Arabia
99 citations
TL;DR: In this article, a low-cost, large-scale, and rapid preparation of flexible and transparent MXene films via inkjet printing is reported, which shows great promise in the field of transparent supercapacitors.
Abstract: MXene is a generic name for a large family of two-dimensional transition metal carbides or nitrides, which show great promise in the field of transparent supercapacitors. However, the manufacturing of supercapacitor electrodes with a high charge storage capacity and desirable transmittance is a challenging task. Herein, a low-cost, large-scale, and rapid preparation of flexible and transparent MXene films via inkjet printing is reported. The MXene films realized the sheet resistance (Rs) of 1.66 ± 0.16 MΩ sq-1 to 1.47 ± 0.1 kΩ sq-1 at the transmissivity of 87-24% (λ = 550 nm), respectively, corresponding to the figure of merit (the ratio of electronic to optical conductivity, σDC/σOP) of ∼0.0012 to 0.13. Furthermore, the potential of inkjet-printed transparent MXene films in transparent supercapacitors was assessed by electrochemical characterization. The MXene film, with a transmittance of 24%, exhibited a superior areal capacitance of 887.5 μF cm-2 and retained 85% of the initial capacitance after 10,000 charge/discharge cycles at the scan rate of 10 mV s-1. Interestingly, the areal capacitance (192 μF cm-2) of an assembled symmetric MXene transparent supercapacitor, with a high transmittance of 73%, still surpasses the performance of previously reported graphene and single-walled carbon nanotube (SWCNT)-based transparent electrodes. The convenient manufacturing and superior electrochemical performance of inkjet-printed flexible and transparent MXene films widen the application horizon of this strategy for flexible energy storage devices.
55 citations
TL;DR: In this article, the authors reviewed the development of the ink's formulation principle, printable electrode materials, and integrated application of flexible supercapacitors (FSCs), and concluded that 3D printing and new printable electrodes materials will be key in successfully designing next-generation printed FSC with high energy and high power.
Abstract: Flexible supercapacitors (FSCs) have attracted extensive attention due to their lightweight, easy integration, high power density, fast charge/discharge rate, and safe features. Printed FSC has provided an economical and simple solution for the fabrication of FSCs different from the traditional manufacturing methods. The successful preparation of printed FSCs mainly depends on the formulating of functional inks and designing of innovative electrode materials. Here, we reviewed the recent development of the ink's formulation principle, printable electrode materials, and integrated application of FSCs devices. The inks with excellent rheological properties, acquired by tuning the components (including binders, additives and solvents), are first introduced to match different printing techniques. The design of printable electrode materials is also highlighted, focusing on electrical double-layer capacitive carbons, pseudocapacitive materials (metal oxides, conducting polymer, etc.), and the newly emerging materials (MXenes, etc.). We concluded that 3D printing and new printable electrode materials will be key in successfully designing next-generation printed FSC with high energy and high power, and thus offer general guidelines to its integrated applications.
46 citations
TL;DR: In this article , a ternary hybrid material polyaniline-coated γ-MnO2/carbon cloth is synthesized via facile hydrothermal and in-situ electrochemical polymerization reactions for superior supercapacitor electrode materials.
39 citations
References
More filters
TL;DR: This work bridges the technological gap between signal transduction, conditioning, processing and wireless transmission in wearable biosensors by merging plastic-based sensors that interface with the skin with silicon integrated circuits consolidated on a flexible circuit board for complex signal processing.
Abstract: Wearable sensor technologies are essential to the realization of personalized medicine through continuously monitoring an individual's state of health. Sampling human sweat, which is rich in physiological information, could enable non-invasive monitoring. Previously reported sweat-based and other non-invasive biosensors either can only monitor a single analyte at a time or lack on-site signal processing circuitry and sensor calibration mechanisms for accurate analysis of the physiological state. Given the complexity of sweat secretion, simultaneous and multiplexed screening of target biomarkers is critical and requires full system integration to ensure the accuracy of measurements. Here we present a mechanically flexible and fully integrated (that is, no external analysis is needed) sensor array for multiplexed in situ perspiration analysis, which simultaneously and selectively measures sweat metabolites (such as glucose and lactate) and electrolytes (such as sodium and potassium ions), as well as the skin temperature (to calibrate the response of the sensors). Our work bridges the technological gap between signal transduction, conditioning (amplification and filtering), processing and wireless transmission in wearable biosensors by merging plastic-based sensors that interface with the skin with silicon integrated circuits consolidated on a flexible circuit board for complex signal processing. This application could not have been realized using either of these technologies alone owing to their respective inherent limitations. The wearable system is used to measure the detailed sweat profile of human subjects engaged in prolonged indoor and outdoor physical activities, and to make a real-time assessment of the physiological state of the subjects. This platform enables a wide range of personalized diagnostic and physiological monitoring applications.
3,235 citations
TL;DR: The performance of a supercapacitor can be characterized by a series of key parameters, including the cell capacitance, operating voltage, equivalent series resistance, power density, energy density, and time constant.
Abstract: The performance of a supercapacitor can be characterized by a series of key parameters, including the cell capacitance, operating voltage, equivalent series resistance, power density, energy density, and time constant. To accurately measure these parameters, a variety of methods have been proposed and are used in academia and industry. As a result, some confusion has been caused due to the inconsistencies between different evaluation methods and practices. Such confusion hinders effective communication of new research findings, and creates a hurdle in transferring novel supercapacitor technologies from research labs to commercial applications. Based on public sources, this article is an attempt to inventory, critique and hopefully streamline the commonly used instruments, key performance metrics, calculation methods, and major affecting factors for supercapacitor performance evaluation. Thereafter the primary sources of inconsistencies are identified and possible solutions are suggested, with emphasis on device performance vs. material properties and the rate dependency of supercapacitors. We hope, by using reliable, intrinsic, and comparable parameters produced, the existing inconsistencies and confusion can be largely eliminated so as to facilitate further progress in the field.
1,013 citations
TL;DR: Recent progress in the development of the most commonly used electronically conducting polymers used in flexible device prototypes are discussed, the advantages and disadvantages of this type of energy storage devices, as well as the two main approaches used in the manufacturing of paper-based charge storage devices.
Abstract: All-polymer and paper-based energy storage devices have significant inherent advantages in comparison with many currently employed batteries and supercapacitors regarding environmental friendliness, flexibility, cost and versatility. The research within this field is currently undergoing an exciting development as new polymers, composites and paper-based devices are being developed. In this report, we review recent progress concerning the development of flexible energy storage devices based on electronically conducting polymers and cellulose containing composites with particular emphasis on paper-based batteries and supercapacitors. We discuss recent progress in the development of the most commonly used electronically conducting polymers used in flexible device prototypes, the advantages and disadvantages of this type of energy storage devices, as well as the two main approaches used in the manufacturing of paper-based charge storage devices.
946 citations
TL;DR: Graphene can be printed onto water-soluble silk, which permits intimate biotransfer of graphene nanosensors onto biomaterials, including tooth enamel, which is a fully biointerfaced sensing platform, which can be tuned to detect target analytes.
Abstract: Direct interfacing of nanosensors onto biomaterials could impact health quality monitoring and adaptive threat detection. Graphene is capable of highly sensitive analyte detection due to its nanoscale nature. Here we show that graphene can be printed onto water-soluble silk. This in turn permits intimate biotransfer of graphene nanosensors onto biomaterials, including tooth enamel. The result is a fully biointerfaced sensing platform, which can be tuned to detect target analytes. For example, via self-assembly of antimicrobial peptides onto graphene, we show bioselective detection of bacteria at single-cell levels. Incorporation of a resonant coil eliminates the need for onboard power and external connections. Combining these elements yields two-tiered interfacing of peptide-graphene nanosensors with biomaterials. In particular, we demonstrate integration onto a tooth for remote monitoring of respiration and bacteria detection in saliva. Overall, this strategy of interfacing graphene nanosensors with biomaterials represents a versatile approach for ubiquitous detection of biochemical targets.
772 citations