Open AccessBook
Springer Handbook of Experimental Solid Mechanics
Reads0
Chats0
TLDR
The first € price and the £ and $ price are net prices, subject to local VAT as discussed by the authors, and they are subject to change without notice. All errors and omissions excepted.Abstract:
The first € price and the £ and $ price are net prices, subject to local VAT. Prices indicated with * include VAT for books; the €(D) includes 7% for Germany, the €(A) includes 10% for Austria. Prices indicated with ** include VAT for electronic products; 19% for Germany, 20% for Austria. All prices exclusive of carriage charges. Prices and other details are subject to change without notice. All errors and omissions excepted.read more
Citations
More filters
Journal ArticleDOI
A Review of Dynamic Experimental Techniques and Mechanical Behaviour of Rock Materials
TL;DR: A review of the development and the state of the art in dynamic testing techniques and dynamic mechanical behaviour of rock materials can be found in this article, where a detailed description of various dynamic mechanical properties (e.g., uniaxial and triaxial compressive strength, tensile strength, shear strength and fracture toughness) and corresponding fracture behaviour are discussed.
Journal ArticleDOI
Assessment of digital image correlation measurement errors: methodology and results
Michel Bornert,Fabrice Brémand,Pascal Doumalin,Jean-Christophe Dupré,Marina Fazzini,Michel Grédia,François Hild,Sébastien Mistou,Jérôme Molimard,Jean-José Orteu,Laurent Robert,Yves Surrel,Pierre Vacher,Bertrand Wattrisse +13 more
TL;DR: A methodology is proposed to assess the metrological performances of the image processing algorithms that constitute their main component, the knowledge of which being required for a global assessment of the whole measurement system.
Journal ArticleDOI
Experimental characterization of the mechanical properties of 3D-printed ABS and polycarbonate parts
Jason T. Cantrell,Sean Rohde,David Damiani,Rishi Gurnani,Luke DiSandro,Josh Anton,Andie Young,Alex Jerez,Douglas Steinbach,Calvin Kroese,Peter Ifju +10 more
TL;DR: In this article, the authors present the methodology and results of the mechanical characterization of acrylonitrile butadiene styrene (ABS) and polycarbonate (PC) 3D printed parts to determine the extent of anisotropy present in 3-D printed materials.
Journal ArticleDOI
Strengthening mechanisms in an Al–Mg alloy
TL;DR: In this paper, the authors present a complete experimental data set for conventional Al-5083 H-131, with primary alloying element Mg (4.77) and secondary element Mn (0.68) in compression over a range of strain rates (10−4−6000 s−1) at room temperature.
Journal ArticleDOI
3-D computer vision in experimental mechanics
TL;DR: In this paper, a list of applications of stereovision (and 3-D DIC) to experimental mechanics is given at the end of the paper, along with a quite inclusive list of references.
References
More filters
Journal ArticleDOI
A polymer gel with electrically driven motility
TL;DR: In this paper, the authors describe a chemomechanical system of this sort based on a synthetic polymer gel, which is anionic, and positively charged surfactant molecules can therefore bind to its surface, inducing local shrinkage by decreasing the difference in osmotic pressure between the gel interior and the solution outside.
Journal ArticleDOI
Phenomenological theory of electro-osmotic effect and water management in polymer electrolyte proton-conducting membranes
TL;DR: In this article, a model which accounts for the electro-osmotically induced drag of water from anode to cathode and the counterflow in a hydraulic pressure gradient is proposed.
Proceedings ArticleDOI
Polymer electrolyte actuator with gold electrodes
TL;DR: In this paper, a tubular actuator with four electrodes was fabricated with the newly developed components and bent more than 90 degree in 2 cm length to all directions, and the displacement of the strip of actuator in typical dimension of 0.2 mm thick and 10 mm long is more than 5 mm.
Effect of solvents on the chemical and physical properties of ionic polymer-metal composites - eScholarship
S Nemat-Nassera,S Zamani,Y Tor +2 more
TL;DR: In this article, a series of tests on both Nafion and Flemion-based IPMCs with ethylene glycol, glycerol, and crown ethers as solvents are presented.