Stagnation-point flow of a nanofluid towards a stretching sheet
01 Dec 2011-International Journal of Heat and Mass Transfer (Pergamon)-Vol. 54, Iss: 25, pp 5588-5594
TL;DR: In this article, the authors reported the flow of a nanofluid near a stagnation point towards a stretching surface and the effects of Brownian motion and thermophoresis are further taken into account.
About: This article is published in International Journal of Heat and Mass Transfer.The article was published on 2011-12-01. It has received 298 citations till now. The article focuses on the topics: Nusselt number & Thermophoresis.
Citations
More filters
TL;DR: In this paper, the effect of thermal radiation on magnetohydrodynamics nanofluid flow between two horizontal rotating plates is studied and the significant effects of Brownian motion and thermophoresis have been included in the model of Nanofluide.
700 citations
TL;DR: In this paper, the effects of Brownian motion on the effective viscosity and thermal conductivity of nanofluid were investigated. And the results were presented graphically in terms of streamlines, isotherms and isokinetic energy.
556 citations
TL;DR: In this paper, the influence of an external magnetic field on ferrofluid flow and heat transfer in a semi annulus enclosure with sinusoidal hot wall is investigated and the governing equations which are derived by considering the both effects of FHD and MHD (Magnetohydrodynamic) are solved via CVFEM (Control Volume based Finite Element Method).
393 citations
TL;DR: In this article, the effect of Brownian motion on the effective thermal conductivity and viscosity of nanofluid is investigated using Lattice Boltzmann method to solve the governing equations.
346 citations
TL;DR: In this paper, an extensive literature review of various turbulators (coiled tubes, extended surfaces (fin, louvered strip, winglet), rough surfaces (Corrugated tube, Rib) and swirl flow devices such as twisted tape, conical ring, snail entry turbulator, vortex rings, coiled wire) for enhancing heat transfer in heat exchangers.
Abstract: Economic reasons (material and energy saving) leads to make efforts for making more efficient heat exchange. The heat transfer enhancement techniques are widely used in many applications in the heating process to make possible reduction in weight and size or enhance the performance of heat exchangers. These techniques are classified as active and passive techniques. The active technique required external power while the passive technique does not need any external power. The passive techniques are valuable compared with the active techniques because the swirl inserts manufacturing process is simple and can be easily employed in an existing heat exchanger. Insertion of swirl flow devices enhance the convective heat transfer by making swirl into the bulk flow and disrupting the boundary layer at the tube surface due to repeated changes in the surface geometry. An effort has been made in this paper to carry out an extensive literature review of various turbulators (coiled tubes, extended surfaces (fin, louvered strip, winglet), rough surfaces (Corrugated tube, Rib) and swirl flow devices such as twisted tape, conical ring, snail entry turbulator, vortex rings, coiled wire) for enhancing heat transfer in heat exchangers. It can be concluded that wire coil gives better overall performance if the pressure drop penalty is considered. The use of coiled square wire turbulators leads to a considerable increase in heat transfer and friction loss over those of a smooth wall tube.
344 citations
References
More filters
TL;DR: In this article, the authors considered seven slip mechanisms that can produce a relative velocity between the nanoparticles and the base fluid and concluded that only Brownian diffusion and thermophoresis are important slip mechanisms in nanofluids.
Abstract: Nanofluids are engineered colloids made of a base fluid and nanoparticles (1-100 nm) Nanofluids have higher thermal conductivity' and single-phase heat transfer coefficients than their base fluids In particular the heat transfer coefficient increases appear to go beyond the mere thermal-conductivity effect, and cannot be predicted by traditional pure-fluid correlations such as Dittus-Boelter's In the nanofluid literature this behavior is generally attributed to thermal dispersion and intensified turbulence, brought about by nanoparticle motion To test the validity of this assumption, we have considered seven slip mechanisms that can produce a relative velocity between the nanoparticles and the base fluid These are inertia, Brownian diffusion, thermophoresis, diffusioplwresis, Magnus effect, fluid drainage, and gravity We concluded that, of these seven, only Brownian diffusion and thermophoresis are important slip mechanisms in nanofluids Based on this finding, we developed a two-component four-equation nonhomogeneous equilibrium model for mass, momentum, and heat transport in nanofluids A nondimensional analysis of the equations suggests that energy transfer by nanoparticle dispersion is negligible, and thus cannot explain the abnormal heat transfer coefficient increases Furthermore, a comparison of the nanoparticle and turbulent eddy time and length scales clearly indicates that the nanoparticles move homogeneously with the fluid in the presence of turbulent eddies so an effect on turbulence intensity is also doubtful Thus, we propose an alternative explanation for the abnormal heat transfer coefficient increases: the nanofluid properties may vary significantly within the boundary layer because of the effect of the temperature gradient and thermophoresis For a heated fluid, these effects can result in a significant decrease of viscosity within the boundary layer, thus leading to heat transfer enhancement A correlation structure that captures these effects is proposed
5,329 citations
TL;DR: In this article, an innovative new class of heat transfer fluids can be engineered by suspending metallic nanoparticles in conventional heat-transfer fluids, which are expected to exhibit high thermal conductivities compared to those of currently used heat transfer fluid, and they represent the best hope for enhancing heat transfer.
Abstract: Low thermal conductivity is a primary limitation in the development of energy-efficient heat transfer fluids that are required in many industrial applications. In this paper we propose that an innovative new class of heat transfer fluids can be engineered by suspending metallic nanoparticles in conventional heat transfer fluids. The resulting {open_quotes}nanofluids{close_quotes} are expected to exhibit high thermal conductivities compared to those of currently used heat transfer fluids, and they represent the best hope for enhancement of heat transfer. The results of a theoretical study of the thermal conductivity of nanofluids with copper nanophase materials are presented, the potential benefits of the fluids are estimated, and it is shown that one of the benefits of nanofluids will be dramatic reductions in heat exchanger pumping power.
4,634 citations
TL;DR: In this paper, a plastischem material fliesst aus einem Spalt with einer Geschwindigkeit, die proportional zum Abstand vom Spalt ist.
Abstract: Eine Platte aus plastischem Material fliesst aus einem Spalt mit einer Geschwindigkeit, die proportional zum Abstand vom Spalt ist. Eine exakte Losung der Grenzschichtgleichungen fur die von der Platte erzeugte Luftbewegung wird gegeben. Oberflachenreibung und Warmeleitungskoeffizient werden berechnet.
3,317 citations
TL;DR: In this article, a model is developed to analyze heat transfer performance of nanofluids inside an enclosure taking into account the solid particle dispersion, where the transport equations are solved numerically using the finite-volume approach along with the alternating direct implicit procedure.
2,560 citations
TL;DR: In this paper, the authors have produced nanotube-in-oil suspensions and measured their effective thermal conductivity, which is anomalously greater than theoretical predictions and is nonlinear with nanotubes loadings.
Abstract: We have produced nanotube-in-oil suspensions and measured their effective thermal conductivity. The measured thermal conductivity is anomalously greater than theoretical predictions and is nonlinear with nanotube loadings. The anomalous phenomena show the fundamental limits of conventional heat conduction models for solid/liquid suspensions. We have suggested physical concepts for understanding the anomalous thermal behavior of nanotube suspensions. In comparison with other nanostructured materials dispersed in fluids, the nanotubes provide the highest thermal conductivity enhancement, opening the door to a wide range of nanotube applications.
2,546 citations