scispace - formally typeset
Search or ask a question
Journal ArticleDOI

Stresses in laminated composite annular disks subjected to a concentrated transverse edge load

TL;DR: Polar orthotropic and rectangular orthotropic annular disks are analyzed for displacements and stresses when subjected to a concentrated transverse load at the free outer edge as mentioned in this paper. But the inner edge of the disk is assumed to be clamped.
About: This article is published in Computers & Structures.The article was published on 1993-08-03. It has received 2 citations till now. The article focuses on the topics: Orthotropic material.
Citations
More filters
Journal ArticleDOI
TL;DR: A bibliographical review of the finite element methods applied for the linear and nonlinear, static and dynamic analyses of basic structural elements from the theoretical as well as practical points of view is given.
Abstract: Gives a bibliographical review of the finite element methods (FEMs) applied for the linear and nonlinear, static and dynamic analyses of basic structural elements from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore aims to give the reader an encyclopaedic view on the subject. The bibliography at the end of the paper contains 2,025 references to papers, conference proceedings and theses/dissertations dealing with the analysis of beams, columns, rods, bars, cables, discs, blades, shafts, membranes, plates and shells that were published in 1992‐1995.

36 citations

References
More filters
Journal ArticleDOI
TL;DR: In this article, the static, vibration, and buckling analysis of axisymmetric circular plates using the finite element method is discussed, and the stiffness matrix of a typical annular plate element is derived from the given displacement function and the appropriate constitutive relations.

38 citations

Journal ArticleDOI
TL;DR: In this paper, the static deflections of an annular plate and a complete circular plate both loaded by single concentrated forces are analyzed, and the results are compared with exact solutions, while the free vibrations of complete circular plates are also carried out and compared to exact solutions.

25 citations

Journal ArticleDOI
TL;DR: In this article, the stiffness coefficients corresponding to the 0th, 1st, and n th harmonics are presented in closed form, which can be readily coded into any special or general purpose structural analysis computer program, represent the exact solution to any structural model consisting of nodal displacements and forces.

15 citations

Journal ArticleDOI
TL;DR: In this paper, a semi-analytical, one-dimensional finite element model was developed using a Fourier series approach to account for the circumferential behaviour of annular disks, which can be readily coded into any general purpose finite element program.

14 citations

Journal ArticleDOI
TL;DR: In this paper, the static analysis of an annular disc with a clamped inner boundary and a concentrated, in-plane load at the outer boundary is presented, and the singularity associated with the concentrated load is isolated and the resulting non-singular problem is solved by the method of complex potentials.
Abstract: The static analysis of an annular disc with a clamped inner boundary and a concentrated, in-plane load at the outer boundary is presented. The singularity associated with the concentrated load is isolated and the resulting non-singular problem is solved by the method of complex potentials. The superposition of these two solutions gives the desired solution. Results are presented for various radius ratios.

9 citations