Structural and chemical synergistic effect of CoS nanoparticles and porous carbon nanorods for high-performance sodium storage
TL;DR: In this paper, ultrafine CoS nanoparticles embedded in porous carbon nanorods (denoted as 7-CoS/C) were facilely fabricated via simultaneous in-situ carbonization and sulfidation of Co-metal organic frameworks (Co-MOF) and have been applied as anode materials for sodium-ion batteries.
About: This article is published in Nano Energy.The article was published on 2017-05-01. It has received 235 citations till now. The article focuses on the topics: Sodium-ion battery.
Citations
More filters
TL;DR: A wide range of applications based on these materials for ORR, OER, HER and multifunctional electrocatalysis are discussed, with an emphasis on the required features of MOF-derived carbon-based materials for the Electrocatalysis of corresponding reactions.
Abstract: Oxygen reduction reaction (ORR), oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) are three key reactions for the development of green and sustainable energy systems. Efficient electrocatalysts for these reactions are highly desired to lower their overpotentials and promote practical applications of related energy devices. Metal–organic frameworks (MOFs) have recently emerged as precursors to fabricate carbon-based electrocatalysts with high electrical conductivity and uniformly distributed active sites. In this review, the current progress of MOF-derived carbon-based materials for ORR/OER/HER electrocatalysis is presented. Materials design strategies of MOF-derived carbon-based materials are firstly summarized to show the rich possibilities of the morphology and composition of MOF-derived carbon-based materials. A wide range of applications based on these materials for ORR, OER, HER and multifunctional electrocatalysis are discussed, with an emphasis on the required features of MOF-derived carbon-based materials for the electrocatalysis of corresponding reactions. Finally, perspectives on the development of MOF-derived carbon-based materials for ORR, OER and HER electrocatalysis are provided.
970 citations
TL;DR: A two-dimensional heterostructure of CoSx (CoS and Co9S8) quantum dots embedded N/S-doped carbon nanosheets ( coSx@NSC) is prepared by a sol-gel method, showing excellent rate capability and outstanding cycling stability, making it promising as an anode material for high-performance sodium-ion batteries.
Abstract: Metal sulfides are promising anode materials for sodium-ion batteries due to their large specific capacities. The practical applications of metal sulfides in sodium-ion batteries, however, are still limited due to their large volume expansion, poor cycling stability, and sluggish electrode kinetics. In this work, a two-dimensional heterostructure of CoSx (CoS and Co9S8) quantum dots embedded N/S-doped carbon nanosheets (CoSx@NSC) is prepared by a sol–gel method. The CoSx quantum dots are in situ formed within ultrafine carbon nanosheets without further sulfidation, thus resulting in ultrafine CoSx particle size and embedded heterostructure. Meanwhile, enriched N and S codoping in the carbon nanosheets greatly enhances the electrical conductivity for the conductive matrix and creates more active sites for sodium storage. As a result, the hybrid CoSx@NSC electrode shows excellent rate capability (600 mAh g–1 at 0.2 A g–1 and 500 mAh g–1 at 10 A g–1) and outstanding cycling stability (87% capacity retention ...
346 citations
TL;DR: In this article, a sponge-like composites assembled by cobalt sulfides quantum dots (Co9S8 QD), mesoporous hollow carbon polyhedral (HCP) matrix, and a reduced graphene oxide (rGO) wrapping sheets are synthesized by a simultaneous thermal reduction, carbonization, and sulfidation of zeolitic imidazolate frameworks@GO precursors.
Abstract: Sponge-like composites assembled by cobalt sulfides quantum dots (Co9S8 QD), mesoporous hollow carbon polyhedral (HCP) matrix, and a reduced graphene oxide (rGO) wrapping sheets are synthesized by a simultaneous thermal reduction, carbonization, and sulfidation of zeolitic imidazolate frameworks@GO precursors. Specifically, Co9S8 QD with size less than 4 nm are homogenously embedded within HCP matrix, which is encapsulated in macroporous rGO, thereby leading to the double carbon-confined hierarchical composites with strong coupling effect. Experimental data combined with density functional theory calculations reveal that the presence of coupled rGO not only prevents the aggregation and excessive growth of particles, but also expands the lattice parameters of Co9S8 crystals, enhancing the reactivity for sodium storage. Benefiting from the hierarchical porosity, conductive network, structural integrity, and a synergistic effect of the components, the sponge-like composites used as binder-free anodes manifest outstanding sodium-storage performance in terms of excellent stable capacity (628 mAh g−1 after 500 cycles at 300 mA g−1) and exceptional rate capability (529, 448, and 330 mAh g−1 at 1600, 3200, and 6400 mA g−1). More importantly, the synthetic method is very versatile and can be easily extended to fabricate other transition-metal-sulfides-based sponge-like composites with excellent electrochemical performances.
262 citations
TL;DR: In this review, the recent emerging strategies and perspectives on LMAs are summarized, following which the current huge evolution in interfacial chemistry regulation, optimizing electrolyte components, designing a rational 'host' for lithium metal, optimizing "solid-state electrolytes" and other emerging strategies for developing high-safety LMAs is highlighted.
Abstract: Developing high-safety Li-metal anodes (LMAs) is extremely important for the application of high-energy Li-metal batteries (LMBs), especially Li–S and Li–O2 battery systems. However, the notorious Li-dendrite growth problem results in serious safety concerns for any energy storage application. Through a recent combination of interface-based science, nanotechnology-based solutions and characterization methods, the LMA is now primed for a technological boom. In this review, the recent emerging strategies and perspectives on LMAs are summarized, following which the current huge evolution in interfacial chemistry regulation, optimizing electrolyte components, designing a rational ‘host’ for lithium metal, optimizing “solid-state electrolytes” and other emerging strategies for developing high-safety LMAs is highlighted. Furthermore, several state-of-the-art in situ/operando synchrotron-based X-ray techniques for high safety LMB research are introduced. With the further development of LMAs in the future, subsequent application in high energy LMBs is to be expected.
208 citations
TL;DR: In this paper, the influence of pyrolysis parameters such as temperature, duration time, gas atmosphere as well as heating rate on physicochemical properties of metal-organic frameworks (MOFs) derivatives is summarized.
182 citations
References
More filters
TL;DR: The battery systems reviewed here include sodium-sulfur batteries that are commercially available for grid applications, redox-flow batteries that offer low cost, and lithium-ion batteries whose development for commercial electronics and electric vehicles is being applied to grid storage.
Abstract: The increasing interest in energy storage for the grid can be attributed to multiple factors, including the capital costs of managing peak demands, the investments needed for grid reliability, and the integration of renewable energy sources. Although existing energy storage is dominated by pumped hydroelectric, there is the recognition that battery systems can offer a number of high-value opportunities, provided that lower costs can be obtained. The battery systems reviewed here include sodium-sulfur batteries that are commercially available for grid applications, redox-flow batteries that offer low cost, and lithium-ion batteries whose development for commercial electronics and electric vehicles is being applied to grid storage.
11,144 citations
TL;DR: New strategies are needed for batteries that go beyond powering hand-held devices, such as using electrode hosts with two-electron redox centers; replacing the cathode hosts by materials that undergo displacement reactions; and developing a Li(+) solid electrolyte separator membrane that allows an organic and aqueous liquid electrolyte on the anode and cathode sides, respectively.
Abstract: Each cell of a battery stores electrical energy as chemical energy in two electrodes, a reductant (anode) and an oxidant (cathode), separated by an electrolyte that transfers the ionic component of the chemical reaction inside the cell and forces the electronic component outside the battery. The output on discharge is an external electronic current I at a voltage V for a time Δt. The chemical reaction of a rechargeable battery must be reversible on the application of a charging I and V. Critical parameters of a rechargeable battery are safety, density of energy that can be stored at a specific power input and retrieved at a specific power output, cycle and shelf life, storage efficiency, and cost of fabrication. Conventional ambient-temperature rechargeable batteries have solid electrodes and a liquid electrolyte. The positive electrode (cathode) consists of a host framework into which the mobile (working) cation is inserted reversibly over a finite solid–solution range. The solid–solution range, which is...
6,950 citations
TL;DR: Some of the recent scientific advances in nanomaterials, and especially in nanostructured materials, for rechargeable lithium-ion batteries are reviewed.
Abstract: Energy storage is more important today than at any time in human history. Future generations of rechargeable lithium batteries are required to power portable electronic devices (cellphones, laptop computers etc.), store electricity from renewable sources, and as a vital component in new hybrid electric vehicles. To achieve the increase in energy and power density essential to meet the future challenges of energy storage, new materials chemistry, and especially new nanomaterials chemistry, is essential. We must find ways of synthesizing new nanomaterials with new properties or combinations of properties, for use as electrodes and electrolytes in lithium batteries. Herein we review some of the recent scientific advances in nanomaterials, and especially in nanostructured materials, for rechargeable lithium-ion batteries.
5,441 citations
4,311 citations
[...]
TL;DR: In this paper, the status of ambient temperature sodium ion batteries is reviewed in light of recent developments in anode, electrolyte and cathode materials, including high performance layered transition metal oxides and polyanionic compounds.
Abstract: The status of ambient temperature sodium ion batteries is reviewed in light of recent developments in anode, electrolyte and cathode materials. These devices, although early in their stage of development, are promising for large-scale grid storage applications due to the abundance and very low cost of sodium-containing precursors used to make the components. The engineering knowledge developed recently for highly successful Li ion batteries can be leveraged to ensure rapid progress in this area, although different electrode materials and electrolytes will be required for dual intercalation systems based on sodium. In particular, new anode materials need to be identified, since the graphite anode, commonly used in lithium systems, does not intercalate sodium to any appreciable extent. A wider array of choices is available for cathodes, including high performance layered transition metal oxides and polyanionic compounds. Recent developments in electrodes are encouraging, but a great deal of research is necessary, particularly in new electrolytes, and the understanding of the SEI films. The engineering modeling calculations of Na-ion battery energy density indicate that 210 Wh kg−1 in gravimetric energy is possible for Na-ion batteries compared to existing Li-ion technology if a cathode capacity of 200 mAh g−1 and a 500 mAh g−1 anode can be discovered with an average cell potential of 3.3 V.
3,776 citations