Surface plasmons on gratings
01 Jan 1988-pp 91-116
About: The article was published on 1988-01-01. It has received 245 citations till now. The article focuses on the topics: Surface plasmon.
Citations
More filters
TL;DR: In this article, the optical properties of submicrometre cylindrical cavities in metallic films were explored and it was shown that arrays of such holes display highly unusual zero-order transmission spectra at wavelengths larger than the array period, beyond which no diffraction occurs.
Abstract: The desire to use and control photons in a manner analogous to the control of electrons in solids has inspired great interest in such topics as the localization of light, microcavity quantum electrodynamics and near-field optics1,2,3,4,5,6. A fundamental constraint in manipulating light is the extremely low transmittivity of apertures smaller than the wavelength of the incident photon. While exploring the optical properties of submicrometre cylindrical cavities in metallic films, we have found that arrays of such holes display highly unusual zero-order transmission spectra (where the incident and detected light are collinear) at wavelengths larger than the array period, beyond which no diffraction occurs. In particular, sharp peaks in transmission are observed at wavelengths as large as ten times the diameter of the cylinders. At these maxima the transmission efficiency can exceed unity (when normalized to the area of the holes), which is orders of magnitude greater than predicted by standard aperture theory. Our experiments provide evidence that these unusual optical properties are due to the coupling of light with plasmons — electronic excitations — on the surface of the periodically patterned metal film. Measurements of transmission as a function of the incident light angle result in a photonic band diagram. These findings may find application in novel photonic devices.
7,316 citations
TL;DR: This paper presents a meta-analysis of four-Wave Mixing and its applications in nanofiltration, which shows clear trends in high-performance liquid chromatography and also investigates the role of nano-magnifying lens technology in this process.
Abstract: 12.2.2. Four-Wave Mixing (FWM) 4849 12.2.3. Dye Aggregation 4850 12.2.4. Optoelectronic Nanodevices 4850 12.3. Sensor 4851 12.3.1. Chemical Sensor 4851 12.3.2. Biological Sensor 4851 12.4. Catalysis 4852 13. Conclusion and Perspectives 4852 14. Abbreviations 4853 15. Acknowledgements 4854 16. References 4854 * Corresponding author E-mail: tpal@chem.iitkgp.ernet.in. † Raidighi College. § Indian Institute of Technology. 4797 Chem. Rev. 2007, 107, 4797−4862
2,414 citations
TL;DR: The optical properties of noble metal nanoparticles, specifically gold, silver, and their combinations, prepared in solution through colloid chemical methods are shown to be mainly influenced by the surface plasmon resonance of conduction electrons.
Abstract: Metal nanoparticles can be used as building blocks for the formation of nanostructured materials. For the design of materials with specific (optical) properties, several approaches can be followed, even when starting from the very same basic units. In this article, a survey is provided of the optical properties of noble metal nanoparticles, specifically gold, silver, and their combinations, prepared in solution through colloid chemical methods. The optical properties are shown to be mainly influenced by the surface plasmon resonance of conduction electrons, the frequency of which is not only determined by the nature of the metal but also by a number of other parameters, such as particle size and shape, the presence of a capping shell on the particle surface, or the dielectric properties of the surrounding medium. Recent results showing how these various parameters affect the optical properties are reviewed. The results highlight the high degree of control that can now be achieved through colloid chemical synthesis.
1,514 citations
TL;DR: It is demonstrated that the nonradiating character of the silver nanowires together with minimized damping due to the well developed wire crystal structure allow them to apply as efficient surface plasmon Fabry-Perot resonators.
Abstract: We report on chemically prepared silver nanowires (diameters around 100 nm) sustaining surface plasmon modes with wavelengths shortened to about half the value of the exciting light. As we find by scattered light spectroscopy and near-field optical microscopy, the nonradiating character of these modes together with minimized damping due to the well developed wire crystal structure gives rise to large values of surface plasmon propagation length and nanowire end face reflectivity of about 10 microm and 25%, respectively. We demonstrate that these properties allow us to apply the nanowires as efficient surface plasmon Fabry-Perot resonators.
1,061 citations
Cites background from "Surface plasmons on gratings"
...The maximum achievable resonator length is, however, limited by the metallic damping of the surface plasmon mode [12]....
[...]
TL;DR: This work combined template stripping with precisely patterned silicon substrates to obtain ultrasmooth pure metal films with grooves, bumps, pyramids, ridges, and holes, and measured surface-plasmon–propagation lengths on the resulting surfaces approach theoretical values for perfectly flat films.
Abstract: Surface plasmons are electromagnetic waves that can exist at metal interfaces because of coupling between light and free electrons. Restricted to travel along the interface, these waves can be channeled, concentrated, or otherwise manipulated by surface patterning. However, because surface roughness and other inhomogeneities have so far limited surface-plasmon propagation in real plasmonic devices, simple high-throughput methods are needed to fabricate high-quality patterned metals. We combined template stripping with precisely patterned silicon substrates to obtain ultrasmooth pure metal films with grooves, bumps, pyramids, ridges, and holes. Measured surface-plasmon-propagation lengths on the resulting surfaces approach theoretical values for perfectly flat films. With the use of our method, we demonstrated structures that exhibit Raman scattering enhancements above 10(7) for sensing applications and multilayer films for optical metamaterials.
852 citations