Synthesis of Al2O3–Cu/water hybrid nanofluids using two step method and its thermo physical properties
05 Sep 2011-Colloids and Surfaces A: Physicochemical and Engineering Aspects (Elsevier)-Vol. 388, Iss: 388, pp 41-48
TL;DR: In this article, Al2O3-Cu hybrid particles have been synthesized by hydrogen reduction technique from the powder mixture of Al 2O3 and CuO in 90:10 weight proportions obtained from a chemical route synthesis and the experimental results have shown that both thermal conductivity and viscosity of the prepared hybrid nanofluids increase with the nanoparticles volume concentration.
About: This article is published in Colloids and Surfaces A: Physicochemical and Engineering Aspects.The article was published on 2011-09-05. It has received 687 citations till now. The article focuses on the topics: Nanofluid & Viscosity.
Citations
More filters
TL;DR: In this paper, a review summarizes recent researches on synthesis, thermophysical properties, heat transfer and pressure drop characteristics, possible applications and challenges of hybrid nanofluids, and showed that proper hybridization may make the hybrid nanoparticles very promising for heat transfer enhancement, however, lot of research works are still needed in the fields of preparation and stability, characterization and applications to overcome the challenges.
Abstract: Researches on the nanofluids have been increased very rapidly over the past decade. In spite of some inconsistency in the reported results and insufficient understanding of the mechanism of the heat transfer in nanofluids, it has been emerged as a promising heat transfer fluid. In the continuation of nanofluids research, the researchers have also tried to use hybrid nanofluid recently, which is engineered by suspending dissimilar nanoparticles either in mixture or composite form. The idea of using hybrid nanofluids is to further improvement of heat transfer and pressure drop characteristics by trade-off between advantages and disadvantages of individual suspension, attributed to good aspect ratio, better thermal network and synergistic effect of nanomaterials. This review summarizes recent researches on synthesis, thermophysical properties, heat transfer and pressure drop characteristics, possible applications and challenges of hybrid nanofluids. Review showed that proper hybridization may make the hybrid nanofluids very promising for heat transfer enhancement, however, lot of research works is still needed in the fields of preparation and stability, characterization and applications to overcome the challenges.
846 citations
Cites methods from "Synthesis of Al2O3–Cu/water hybrid ..."
...[71,72] prepared nanocrystalline alumina–copper hybrid (Al2O3–Cu) powder by a thermochemical synthesis method which consists of the following stages: spray-drying, oxidation of precursor powder, reduction by hydrogen and homogenization....
[...]
TL;DR: In this paper, the preparation of metal and metal oxides nanofluids and hybrid or composite nano-fluids is discussed, and various techniques used to study the physical and chemical characteristics of nanof-luids are presented.
Abstract: Selection of suitable heat transfer fluid for heat dissipation is an important consideration in the design of heat exchanging systems. Nanofluid, a colloidal mixture made of a base fluid and a nanoparticle, is a new generation of heat transfer fluids becoming a high potential fluid in heat transfer applications due to enhanced thermal conductivity. Research studies about nanofluids are on the rise owing to the mounting interest and demand for nanofluids as heat transfer fluids in a wide variety of applications. Recently, nanofluid technology has a new dimension of impregnating two or more nanoparticles in base fluids, namely hybrid or composite nanofluids. This paper reviews the preparation of metal and metal oxides nanofluids and hybrid nanofluids and the various techniques used to study the physical and chemical characteristics of nanofluids. Thermo-physical and heat transfer properties of nanofluids including the improved thermal conductivity, viscosity and specific heat models for nanofluids are presented. Finally, various application areas of nanofluids, such as transportation, electronic cooling, energy storage, mechanical applications etc. are discussed.
462 citations
TL;DR: In this paper, the authors provide a comprehensive review on thermal conductivity of hybrid nanofluids by overviewing experimental, numerical and ANN (artificial neural networking) studies, and various factors such as nanoparticle type, concentration of nanoparticles, types of base fluid, size of nanoparticle, temperature, addition of surfactant, pH variation and sonication time are analyzed.
437 citations
TL;DR: In this article, the authors summarized the important results regarding the improvement in the thermophysical properties of nanofluids and identified the opportunities for future research in the field of nanophotonics.
Abstract: This paper summarizes the important results regarding the improvement in the thermophysical properties of nanofluids. The influence of important parameters like particle's (loading, material, size, and shape), base fluid type, temperature, additives and pH value has been considered. There are many conflicting reports on the influence of parameters on thermophysical properties and the literature in this field is widespread, so this article would be beneficial for investigators to have a precise screening of a broad range of studies in this field. Further literature review of the applications of nanofluids with a particular focus on the advantages of using nanofluids in solar collectors and as coolants in automotive heat exchangers. The authors hope that this review can help in the translation of nanofluid technology from the lab scale research to industrial applications in solar collectors and automotive sector. At last, the paper identifies the opportunities for future research.
408 citations
TL;DR: In this paper, a review summarizes the contemporary investigations on synthesis, thermo-physical properties, heat transfer characteristics, hydrodynamic behavior and fluid flow characteristics reported by researchers on different hybrid nanofluids.
Abstract: Nanofluids have found crucial presence in heat transfer applications with their promising characteristics that can be controlled as per requirements. Nanofluids possess unique characteristics that have attracted many researchers over the past two decades to design new thermal systems for different engineering applications. Mono nanofluids, prepared with a single kind of nanoparticles, possess certain specific benefits owing to the properties of the suspended nanoparticle. However to further improve the characteristics of nanofluids, that could possess a number of favourable characteristics, researchers developed a new generation heat transfer fluid called hybrid nanofluid. Hybrid nanofluids are prepared either by dispersing dissimilar nanoparticles as individual constituents or by dispersing nanocomposite particles in the base fluid. Hybrid nanofluids may possess better thermal network and rheological properties due to synergistic effect. Researchers, to adjudge the advantages, disadvantages and their suitability for diversified applications, are extensively investigating the behavior and properties of these hybrid nanofluids. This review summarizes the contemporary investigations on synthesis, thermo-physical properties, heat transfer characteristics, hydrodynamic behavior and fluid flow characteristics reported by researchers on different hybrid nanofluids. This review also outlines the applications and challenges associated with hybrid nanofluid and makes some suggestions for future scope of research in this area.
402 citations
References
More filters
Book•
01 Jan 1873
TL;DR: The most influential nineteenth-century scientist for twentieth-century physics, James Clerk Maxwell (1831-1879) demonstrated that electricity, magnetism and light are all manifestations of the same phenomenon: the electromagnetic field as discussed by the authors.
Abstract: Arguably the most influential nineteenth-century scientist for twentieth-century physics, James Clerk Maxwell (1831–1879) demonstrated that electricity, magnetism and light are all manifestations of the same phenomenon: the electromagnetic field. A fellow of Trinity College Cambridge, Maxwell became, in 1871, the first Cavendish Professor of Physics at Cambridge. His famous equations - a set of four partial differential equations that relate the electric and magnetic fields to their sources, charge density and current density - first appeared in fully developed form in his 1873 Treatise on Electricity and Magnetism. This two-volume textbook brought together all the experimental and theoretical advances in the field of electricity and magnetism known at the time, and provided a methodical and graduated introduction to electromagnetic theory. Volume 2 covers magnetism and electromagnetism, including the electromagnetic theory of light, the theory of magnetic action on light, and the electric theory of magnetism.
9,565 citations
TL;DR: In this paper, an expression for the viscosity of solutions and suspensions of finite concentration is derived by considering the effect of the addition of one solute-molecule to an existing solution, which is considered as a continuous medium.
Abstract: An expression for the viscosity of solutions and suspensions of finite concentration is derived by considering the effect of the addition of one solute‐molecule to an existing solution, which is considered as a continuous medium.
3,724 citations
3,019 citations
TL;DR: In this paper, the authors have produced nanotube-in-oil suspensions and measured their effective thermal conductivity, which is anomalously greater than theoretical predictions and is nonlinear with nanotubes loadings.
Abstract: We have produced nanotube-in-oil suspensions and measured their effective thermal conductivity. The measured thermal conductivity is anomalously greater than theoretical predictions and is nonlinear with nanotube loadings. The anomalous phenomena show the fundamental limits of conventional heat conduction models for solid/liquid suspensions. We have suggested physical concepts for understanding the anomalous thermal behavior of nanotube suspensions. In comparison with other nanostructured materials dispersed in fluids, the nanotubes provide the highest thermal conductivity enhancement, opening the door to a wide range of nanotube applications.
2,546 citations