Synthesis of crystalline metal nitride and metal carbide nanostructures by sol-gel chemistry
TL;DR: In this article, a review of sol-gel-based pathways for the synthesis of metal nitride and carbide nanoparticles is presented, with an overview of the potentialities of these still hardly touched materials.
About: This article is published in Nano Today.The article was published on 2011-08-01. It has received 193 citations till now. The article focuses on the topics: Carbide & Nitride.
Citations
More filters
TL;DR: Recent breakthroughs in engineering nanocatalysts based on the earth-abundant materials for boosting ORR are highlighted, providing new opportunities for enhancing ORR performance at the molecular level.
Abstract: Replacing the rare and precious platinum (Pt) electrocatalysts with earth-abundant materials for promoting the oxygen reduction reaction (ORR) at the cathode of fuel cells is of great interest in developing high-performance sustainable energy devices. However, the challenging issues associated with non-Pt materials are still their low intrinsic catalytic activity, limited active sites, and the poor mass transport properties. Recent advances in material sciences and nanotechnology enable rational design of new earth-abundant materials with optimized composition and fine nanostructure, providing new opportunities for enhancing ORR performance at the molecular level. This Review highlights recent breakthroughs in engineering nanocatalysts based on the earth-abundant materials for boosting ORR.
881 citations
TL;DR: Chimie de la Matier̀e Condenseé de Paris, UPMC Univ Paris 06, UMR 7574, Colleǵe de France, 11 Place Marcelin Berthelot, 75231 Paris Cedex 05; Laboratory Heteroelements and Coordination, Chemistry Department, Ecole Polytechnique, CNRS-UMR 7653, Palaiseau, France
Abstract: and Perspectives Sophie Carenco,†,‡,§,∥,⊥ David Portehault,*,†,‡,§ Ced́ric Boissier̀e,†,‡,§ Nicolas Meźailles, and Cleḿent Sanchez*,†,‡,§ †Chimie de la Matier̀e Condenseé de Paris, UPMC Univ Paris 06, UMR 7574, Colleg̀e de France, 11 Place Marcelin Berthelot, 75231 Paris Cedex 05, France ‡Chimie de la Matier̀e Condenseé de Paris, CNRS, UMR 77574, Colleg̀e de France, 11 Place Marcellin Berthelot, 75231 Paris Cedex 05, France Chimie de la Matier̀e Condenseé de Paris, Colleg̀e de France, 11 Place Marcellin Berthelot, 75231 Paris Cedex 05, France Laboratory Heteroelements and Coordination, Chemistry Department, Ecole Polytechnique, CNRS-UMR 7653, Palaiseau, France
840 citations
TL;DR: This article panoramically reviews the counter electrodes in D SSCs, which is of great significance for enhancing the development levels of DSSCs and other photoelectrochemical devices.
Abstract: Dye-sensitized solar cells (DSSCs) are regarded as prospective solar cells for the next generation of photovoltaic technologies and have become research hotspots in the PV field. The counter electrode, as a crucial component of DSSCs, collects electrons from the external circuit and catalyzes the redox reduction in the electrolyte, which has a significant influence on the photovoltaic performance, long-term stability and cost of the devices. Solar cells, dye-sensitized solar cells, as well as the structure, principle, preparation and characterization of counter electrodes are mentioned in the introduction section. The next six sections discuss the counter electrodes based on transparency and flexibility, metals and alloys, carbon materials, conductive polymers, transition metal compounds, and hybrids, respectively. The special features and performance, advantages and disadvantages, preparation, characterization, mechanisms, important events and development histories of various counter electrodes are presented. In the eighth section, the development of counter electrodes is summarized with an outlook. This article panoramically reviews the counter electrodes in DSSCs, which is of great significance for enhancing the development levels of DSSCs and other photoelectrochemical devices.
547 citations
TL;DR: A facile wet-chemical route for the synthesis of Hägg iron carbide nanoparticles, in which bromide was found to be the key inducing agent for the conversion of Fe(CO)(5) to Fe(5)C(2) in the synthetic process, showing enhanced catalytic performance in terms of CO conversion and product selectivity.
Abstract: Iron carbide nanoparticles have long been considered to have great potential in new energy conversion, nanomagnets, and nanomedicines. However, the conventional relatively harsh synthetic conditions of iron carbide hindered its wide applications. In this article, we present a facile wet-chemical route for the synthesis of Hagg iron carbide (Fe5C2) nanoparticles, in which bromide was found to be the key inducing agent for the conversion of Fe(CO)5 to Fe5C2 in the synthetic process. Furthermore, the as-synthesized Fe5C2 nanoparticles were applied in the Fischer–Tropsch synthesis (FTS) and exhibited intrinsic catalytic activity in FTS, demonstrating that Fe5C2 is an active phase for FTS. Compared with a conventional reduced-hematite catalyst, the Fe5C2 nanoparticles showed enhanced catalytic performance in terms of CO conversion and product selectivity.
496 citations
TL;DR: Specific nanostructures and carbon-based hybrids are introduced to increase active-site abundance and to promote mass transportation, and heteroatom doping and heterointerface engineering are encouraged to optimize the chemical configurations of active sites toward intrinsically boosted HER kinetics.
Abstract: As the key of hydrogen economy, electrocatalytic hydrogen evolution reactions (HERs) depend on the availability of cost-efficient electrocatalysts. Over the past years, there is a rapid rise in noble-metal-free electrocatalysts. Among them, transition metal carbides (TMCs) are highlighted due to their structural and electronic merits, e.g., high conductivity, metallic band states, tunable surface/bulk architectures, etc. Herein, representative efforts and progress made on TMCs are comprehensively reviewed, focusing on the noble-metal-like electronic configuration and the relevant structural/electronic modulation. Briefly, specific nanostructures and carbon-based hybrids are introduced to increase active-site abundance and to promote mass transportation, and heteroatom doping and heterointerface engineering are encouraged to optimize the chemical configurations of active sites toward intrinsically boosted HER kinetics. Finally, a perspective on the future development of TMC electrocatalysts is offered. The overall aim is to shed some light on the exploration of emerging materials in energy chemistry.
459 citations
References
More filters
TL;DR: In this paper, the preparation of a colloidal colloidal by un procede sol gel is described, and a procedure for determination des proprietes electriques et electrochimiques is described.
2,040 citations
TL;DR: Tungsten carbide catalyzes the formation of water from hydrogen and oxygen at room temperature, the reduction of tungsten trioxide by hydrogen in the presence of water, and the isomerization of 2,2-dimethylpropane to 2-methylbutane.
Abstract: Tungsten carbide catalyzes the formation of water from hydrogen and oxygen at room temperature, the reduction of tungsten trioxide by hydrogen in the presence of water, and the isomerization of 2,2-dimethylpropane to 2-methylbutane. This catalytic behavior, which is typical of platinum, is not exhibited at all by tungsten. The surface electronic properties of the latter are therefore modified by carbon in such a way that they resemble those of platinum.
1,738 citations
TL;DR: In this article, the chemical and thermal stability of epitaxial nitride films is discussed in relation to the problems of deposition processes and the advantages for applications in high-power and high-temperature devices.
Abstract: Recent research results pertaining to InN, GaN and AlN are reviewed, focusing on the different growth techniques of Group III-nitride crystals and epitaxial films, heterostructures and devices. The chemical and thermal stability of epitaxial nitride films is discussed in relation to the problems of deposition processes and the advantages for applications in high-power and high-temperature devices. The development of growth methods like metalorganic chemical vapour deposition and plasma-induced molecular beam epitaxy has resulted in remarkable improvements in the structural, optical and electrical properties. New developments in precursor chemistry, plasma-based nitrogen sources, substrates, the growth of nucleation layers and selective growth are covered. Deposition conditions and methods used to grow alloys for optical bandgap and lattice engineering are introduced. The review is concluded with a description of recent Group III-nitride semiconductor devices such as bright blue and white light-emitting diodes, the first blue-emitting laser, high-power transistors, and a discussion of further applications in surface acoustic wave devices and sensors.
1,386 citations
TL;DR: In this article, the development of visible-light-driven photocatalysts focusing on the refinement of non-oxide-type photocatalyst such as (oxy)nitrides and oxysulfides is discussed.
Abstract: Overall water splitting to form hydrogen and oxygen over a heterogeneous photocatalyst using solar energy is a promising process for clean and recyclable hydrogen production in large-scale. In recent years, numerous attempts have been made for the development of photocatalysts that work under visible-light irradiation to efficiently utilize solar energy. This article presents recent research progress in the development of visible-light-driven photocatalysts, focusing on the refinement of non-oxide-type photocatalysts such as (oxy)nitrides and oxysulfides.
1,341 citations
TL;DR: The description and discussion of the major applications of hybrid inorganic-organic (or biologic) materials are the major topic of this critical review.
Abstract: Today cross-cutting approaches, where molecular engineering and clever processing are synergistically coupled, allow the chemist to tailor complex hybrid systems of various shapes with perfect mastery at different size scales, composition, functionality, and morphology. Hybrid materials with organic–inorganic or bio–inorganic character represent not only a new field of basic research but also, via their remarkable new properties and multifunctional nature, hybrids offer prospects for many new applications in extremely diverse fields. The description and discussion of the major applications of hybrid inorganic–organic (or biologic) materials are the major topic of this critical review. Indeed, today the very large set of accessible hybrid materials span a wide spectrum of properties which yield the emergence of innovative industrial applications in various domains such as optics, micro-electronics, transportation, health, energy, housing, and the environment among others (526 references).
1,159 citations