Journal ArticleDOI
Synthesis of nanostructured and Ni-Cr3C2 powders by an organic solution reaction method
Reads0
Chats0
TLDR
In this paper, the reductive decomposition of an organic solution of metal chloride precursors using sodium triethylborohydride was used to obtain nanostructured nickel/chromium (NiCr) and nickel-chromium carbide powders via a chemical route.About:
This article is published in Nanostructured Materials.The article was published on 1996-11-22. It has received 17 citations till now. The article focuses on the topics: Carbide & Cermet.read more
Citations
More filters
Journal ArticleDOI
Study of nickel catalysts supported on Al2O3, SiO2 or Nb2O5 oxides
TL;DR: In this article, the authors have studied nickel classical catalysts supported on Al2O3, SiO2 and Nb2O5 oxides, using simple (SIM) or EDTA-double impregnation (DIM) methods.
Patent
Insulator coated magnetic nanoparticulate composites with reduced core loss and method of manufacture thereof
TL;DR: In this article, a series of bulk-size magnetic/insulating nanostructured composite soft magnetic materials with significantly reduced core loss and its manufacturing technology is presented, consisting of a magnetic component, which contains one or more magnetic components, and an insulating component.
Journal ArticleDOI
Size-controlled synthesis, microstructure and magnetic properties of Ni nanoparticles
TL;DR: In this article, a solution reduction process was used to synthesize Ni nanoparticles with different mean diameters of 15-83nm, which can be controlled by varying the concentration of NiCl 2 ·6H 2 O and synthesis temperature.
Patent
Tape casting method and tape cast materials
TL;DR: A precursor tape casting method is one in which chemical precursors are converted into a final chemical phase from green tapes to products as mentioned in this paper, where lower annealing temperatures instead of high temperature sintering allow the formation of grains of about 1 to about 100 nanometers.
Journal ArticleDOI
Microstructure of Ni(Cr)-TiC-Cr3C2-Cr7C3 composite powder
TL;DR: In this paper, the Ni(Cr)-TiC-Cr3C2-Cr7C3 composite powder was prepared by SHS (Self-propagating High-temperature Synthesis) process using elemental powders as starting materials.
References
More filters
Book
The manipulation of air-sensitive compounds
TL;DR: Inert Gases and Their Purification as discussed by the authors, inert gases and their purification are used for line design and operation of vacuum line equipment and their operation is described in detail.
Journal ArticleDOI
Formation of Colloidal Transition Metals in Organic Phases and Their Application in Catalysis
Journal ArticleDOI
Preparation of Organometallic Compounds from Highly Reactive Metal Powders
TL;DR: Three principal approaches have been developed in recent years: the metal vaporization method, sonochemistry, and the preparation of finely divided metal powders by the reduction of metal salts.
Journal ArticleDOI
On the stability of Cr carbides
TL;DR: In this article, the thermodynamic stabilities of Cr carbides have been reviewed in the Cr-C, Fe-Cr-V, C, Ni-Cr and W carbides considering the relative stabilities between Cr carbide and V carbide or W carbide.
Journal ArticleDOI
Processing and properties of nanostructured WC-Co
TL;DR: In this article, a novel chemical processing method is described for making nanostructured WC-Co powders, which is critical to the success of the process is the control of thermodynamics and kinetics of gas-solid reactions in a fluid bed reactor.