Proceedings ArticleDOI
Tapered-CPW fed printed triangular monopole antenna
Mahesh P. Abegaonkar,Yatinder Chhikara,Ananjan Basu,Shiban K. Koul +3 more
- pp 1-4
Reads0
Chats0
TLDR
In this paper, a triangular monopole antenna fed by a tapered-coplanar waveguide (CPW) is presented for IEEE 802.11a and HiperLAN2.Abstract:
A compact triangular monopole antenna fed by a tapered-coplanar waveguide (CPW) is presented. The simulated and measured return loss results are presented. The proposed antenna offers a wide bandwidth from 4.14?9.84 GHz (81%) covering WLAN frequency bands for IEEE 802.11a and HiperLAN2 as is seen from the measured results.read more
Citations
More filters
Journal ArticleDOI
CPW‐fed equilateral triangular‐ring slot antenna with capacitive loading
TL;DR: In this paper, a coplanar equilateral triangular-ring slot antenna with dual frequency operation is proposed for WLAN (Wireless Local Area Network) system in the 2.4/5.8 GHz operating bands.
References
More filters
Journal ArticleDOI
Wide-band planar monopole antennas
TL;DR: In this article, a simple formula is proposed to predict the frequency corresponding to the lower edge of the bandwidth for each of these configurations, including square, rectangular, and hexagonal disc monopole antennas.
Journal ArticleDOI
Ultrawide-band square planar metal-plate monopole antenna with a trident-shaped feeding strip
TL;DR: In this article, a trident-shaped feeding strip was used to feed a square planar metal-plate monopole antenna with a very wide impedance bandwidth of about 10 GHz (about 1.4-11.4 GHz, bandwidth ratio about 1:8.3).
Journal ArticleDOI
Planar elliptical antenna for ultra-wideband communications
C.-Y. Huang,W.-C. Hsia +1 more
TL;DR: In this paper, a printed planar elliptic patch juxtaposed with the ground pattern in a single substrate providing an ultra-wideband impedance bandwidth is presented, which is achieved by using a new impedance-matching technique of cutting a notch at a ground pattern opposite the microstrip line.
Journal ArticleDOI
Modified inverted-L monopole antenna for 2.4/5 GHz dual-band operations
TL;DR: In this article, a modified inverted-L monopole antenna for dual-band operation is proposed, which is designed to operate in 2.4 GHz and 5 GHz bands for WLAN applications in IEEE 802.11a/b and HIPERLAN/2 systems.
Journal ArticleDOI
Dual-band monopole antenna with shorted parasitic element
C.-Y. Huang,P.-Y. Chiu +1 more
TL;DR: In this paper, a printed dual-band C-shaped monopole antenna with a shorted parasitic element is proposed, which can provide two separate impedance bandwidths of 156 MHz and 2048 MHz, respectively, making it easily cover the required bandwidths for wireless local area network (WLAN) operation in the 2.4 GHz band and 5.2/5.8 GHz bands.