Temperature dependence of whispering gallery modes of quantum dot-doped microbottle resonators
TL;DR: In this paper, the temperature dependence of the whispering gallery modes of self-assembled microbottle resonators made of poly (methyl methacrylate) (PMMA) have been studied.
About: This article is published in Journal of Luminescence.The article was published on 2020-05-01 and is currently open access. It has received 11 citations till now. The article focuses on the topics: Quantum dot & Cadmium selenide.
Citations
More filters
••
TL;DR: The most recent advances in biosensing with whisperinggallery modes (WGMs) are described in this paper, where the basic concepts of WGM resonators, the integration of gain media into various active WGM sensors and devices, and the cutting-edge advances in photonic devices for micro-and nanoprobing of biological samples that can be integrated with WGM lasers.
Abstract: Lasers are the pillars of modern optics and sensing. Microlasers based on whispering-gallery modes (WGMs) are miniature in size and have excellent lasing characteristics suitable for biosensing. WGM lasers have been used for label-free detection of single virus particles, detection of molecular electrostatic changes at biointerfaces, and barcode-type live-cell tagging and tracking. The most recent advances in biosensing with WGM microlasers are described in this review. We cover the basic concepts of WGM resonators, the integration of gain media into various active WGM sensors and devices, and the cutting-edge advances in photonic devices for micro- and nanoprobing of biological samples that can be integrated with WGM lasers.
111 citations
••
TL;DR: A review from literature appearing over about the past 5 years, focusing on selected selenide reports and related chemistry as discussed by the authors, aimed for a digestible, relevant, review intended to be usefully interconnected within the realm of fluorescence and selenium chemistry.
Abstract: In this review from literature appearing over about the past 5 years, we focus on selected selenide reports and related chemistry; we aimed for a digestible, relevant, review intended to be usefully interconnected within the realm of fluorescence and selenium chemistry. Tellurium is mentioned where relevant. Topics include selenium in physics and surfaces, nanoscience, sensing and fluorescence, quantum dots and nanoparticles, Au and oxide nanoparticles quantum dot based, coatings and catalyst poisons, thin film, and aspects of solar energy conversion. Chemosensing is covered, whether small molecule or nanoparticle based, relating to metal ion analytes, H2S, as well as analyte sulfane (biothiols—including glutathione). We cover recent reports of probing and fluorescence when they deal with redox biology aspects. Selenium in therapeutics, medicinal chemistry and skeleton cores is covered. Selenium serves as a constituent for some small molecule sensors and probes. Typically, the selenium is part of the reactive, or active site of the probe; in other cases, it is featured as the analyte, either as a reduced or oxidized form of selenium. Free radicals and ROS are also mentioned; aggregation strategies are treated in some places. Also, the relationship between reduced selenium and oxidized selenium is developed.
28 citations
••
TL;DR: In this article , the authors outline the most recent advancements in gain-doped optical WGM microcavities and introduce the dynamics of the gain in WGM resonators.
Abstract: Whispering-gallery mode (WGM) cavities formed by dielectric structures have attracted intensive interest in various fields. The high-quality factor and smaller mode volume associated with the optical modes have inspired experiments in nonlinear optics, nanophotonics, and quantum information science. Moreover, they are also used in optical biosensors and other significant applications. To further reduce the material loss of the resonator, optical gain materials, such as erbium and ytterbium, are doped into the dielectric structure to increase the nonlinear effect and enhance the interaction between light and matter. Here in this review, we outline the most recent advancements in gain-doped optical WGM microcavities. Moreover, we introduce the dynamics of the gain in WGM resonators, the integration of gain media into WGM microcavities with various shapes, and the fabrication and applications of the gain microcavities. Also, the applications of the gain cavity based on the whispering-gallery mode have been introduced, e.g., ultra-sensitive sensors, low-threshold lasers, and high-performance optical systems.
8 citations
••
TL;DR: In this paper, the fluorescence spectrum spans in the visible-near IR region (from 500nm to 900nm) with presence of prominent characteristic peaks of neutral and negatively charged NVs.
6 citations
••
TL;DR: In this paper , the effect of the shape of the metal NPs on the output field strength was investigated for single and their dimer NPs with different dimer nanogaps with photonic nano-nodes producing microcavity.
Abstract: A photonic nanojet (PNJ) from a microcavity is a narrow and intense beam of light used to enhance the emerging electric field. Metal nanoparticles (NPs), on the other hand, confine a strong field in their vicinity due to the resonance of the free electrons with the incident field. A hybrid combination of a microcavity with a NP can drastically enhance the output field. In this work, a systematic numerical study of the microcavity-NP system has been carried out to investigate the effect of the shape of the metal NPs on the output field strength. The single and their dimer NPs with different dimer nanogaps with PNJ producing microcavity have been investigated. Splitting of the broad dipole mode of the NP has also been observed. As an application of this study, the surface enhanced Raman spectroscopy factor of the order of 107 has been estimated for nano-cube dimer NP-microcavity hybrid system.
5 citations
References
More filters
••
TL;DR: In this article, the optical constants of amorphous Ge were determined for the photon energies from 0.08 to 1.6 eV, and the absorption is due to k-conserving transitions of holes between the valence bands as in p-type crystals.
Abstract: The optical constants of amorphous Ge are determined for the photon energies from 0.08 to 1.6 eV. From 0.08 to 0.5 eV, the absorption is due to k-conserving transitions of holes between the valence bands as in p-type crystals; the spin-orbit splitting is found to be 0.20 and 0.21 eV in non-annealed, and annealed samples respectively. The effective masses of the holes in the three bands are 0.49 m (respectively 0.43 m); 0.04 m, and 0.08 m. An absorption band is observed below the main absorption edge (at 300 °K the maximum of this band is at 0.86 eV); the absorption in this band increases with increasing temperature. This band is considered to be due to excitons bound to neutral acceptors, and these are presumably the same ones that play a decisive role in the transport properties and which are considered to be associated with vacancies. The absorption edge has the form: ω2ϵ2∼(hω−Eg)2 (Eg = 0.88 eV at 300 °K). This suggests that the optical transitions conserve energy but not k vector, and that the densities of states near the band extrema have the same energy-dependence as in crystalline Ge. A simple theory describing this situation is proposed, and comparison of it with the experimental results leads to an estimate of the localization of the conduction-band wavefunctions.
8,184 citations
••
5,238 citations
••
TL;DR: In this article, a hybrid organic/inorganic electroluminescent device was constructed based on the recombination of holes injected into a layer of semiconducting p-paraphenylene vinylene (PPV) with electrons injected into the multilayer film of cadmium selenide nanocrystals.
Abstract: ELECTROLUMINESCENT devices have been developed recently that are based on new materials such as porous silicon1 and semiconducting polymers2,3. By taking advantage of developments in the preparation and characterization of direct-gap semiconductor nanocrystals4–6, and of electroluminescent polymers7, we have now constructed a hybrid organic/inorganic electroluminescent device. Light emission arises from the recombination of holes injected into a layer of semiconducting p-paraphenylene vinylene (PPV)8–10 with electrons injected into a multilayer film of cadmium selenide nanocrystals. Close matching of the emitting layer of nanocrystals with the work function of the metal contact leads to an operating voltage11 of only 4V. At low voltages emission from the CdSe layer occurs. Because of the quantum size effect19–24 the colour of this emission can be varied from red to yellow by changing the nanocrystal size. At higher voltages green emission from the polymer layer predominates. Thus this device has a degree of voltage tunability of colour.
3,783 citations
•
TL;DR: In this article, a hybrid organic/inorganic electroluminescent device was constructed based on the recombination of holes injected into a layer of semiconducting p-paraphenylene vinylene (PPV) with electrons injected into the multilayer film of cadmium selenide nanocrystals.
Abstract: ELECTROLUMINESCENT devices have been developed recently that are based on new materials such as porous silicon' and semiconducting polymers 2,3 . By taking advantage of developments in the preparation and characterization of direct-gap semiconductor nanocrystals 4-6 , and of electroluminescent polymers7, we have now constructed a hybrid organic/inorganic electroluminescent device. Light emission arises from the recombination of holes injected into a layer of semiconducting p-paraphenylene vinylene (PPV) 2-10 with electrons injected into a multilayer film of cadmium selenide nanocrystals. Close matching of the emitting layer of nanocrystals with the work function of the metal contact leads to an operating voltage" of only 4 V. At low voltages emission from the CdSe layer occurs. Because of the quantum size effect 19-24 the colour of this emission can be varied from red to yellow by changing the nanocrystal size. At higher voltages green emission from the polymer layer predominates. Thus this device has a degree of voltage tunability of colour.
3,285 citations
••
TL;DR: By using bifunctional surface modifiers (SH-R-COOH), CdSe quantum dots (QDs) have been assembled onto mesoscopic TiO(2) films and exhibits a photon-to-charge carrier generation efficiency of 12%.
Abstract: By using bifunctional surface modifiers (SH−R−COOH), CdSe quantum dots (QDs) have been assembled onto mesoscopic TiO2 films. Upon visible light excitation, CdSe QDs inject electrons into TiO2 nanocrystallites. Femtosecond transient absorption as well as emission quenching experiments confirm the injection from the excited state of CdSe QDs into TiO2 nanoparticles. Electron transfer from the thermally relaxed s-state occurs over a wide range of rate constant values between 7.3 × 109 and 1.95 × 1011 s-1. The injected charge carriers in a CdSe-modified TiO2 film can be collected at a conducting electrode to generate a photocurrent. The TiO2−CdSe composite, when employed as a photoanode in a photoelectrochemical cell, exhibits a photon-to-charge carrier generation efficiency of 12%. Significant loss of electrons occurs due to scattering as well as charge recombination at TiO2/CdSe interfaces and internal TiO2 grain boundaries.
1,738 citations