Tensile strength evaluation of glass/jute fibers reinforced composites: An experimental and numerical approach
01 Jun 2021-Vol. 10, pp 100232
TL;DR: In this article, the tensile properties of natural and synthetic fiber-reinforced hybrid composites are reported, and errors between experimental and numerical simulations are found for different stacking sequences due to non-uniformity in jute fiber diameter and the manufacturing process adopted for these hybrid composite materials.
Abstract: Polymer-based composites have an exceptional perspective to replace traditional structural materials like steel and aluminium, owing to their low weight, high strength, and outstanding performance at elevated temperatures. However, the utilization of natural reinforcements for functional polymer composites is still in infancy. In this study, the tensile properties of natural and synthetic fiber-reinforced hybrid composites are reported. Glass-jute hybrid composites, prepared through hand layup technique, were used with different glass and jute fiber stacking sequences. The experimental results stipulate that the tensile properties of glass fiber reinforced polymer (GFRP) were merely affected at lower jute fiber concentration. The strength of composites consisting of single jute fabric lamina and four glass-fiber laminas were comparable with five-laminas GFRP composites. For validation of the experimental tensile testing results, a numerical simulation was also executed. Errors between experimental and numerical simulations were found for different stacking sequences due to non-uniformity in jute fiber diameter and the manufacturing process adopted for these hybrid composites. Fractographic analysis revealed the micro voids and adhesive failure at different joining layers of fibers as the primary cause of delamination.
Citations
More filters
01 Sep 2021
TL;DR: In this article, the authors highlighted some of the important breakthroughs associated with the NFRPCs in terms of sustainability, eco-friendliness, and economic perspective, and elucidated the significance of using numerical models for NFRMCs.
Abstract: In the contemporary world, natural fibers reinforced polymer composite (NFRPC) materials are of great interest owing to their eco-friendly nature, lightweight, life-cycle superiority, biodegradability, low cost, noble mechanical properties. NFRPCs are widely applied in various engineering applications and this research field is continuously developing. However, the researchers are facing numerous challenges regarding the developments and applications of NFPRCs due to the inherent characteristics of natural fibers (NFs). These challenges include quality of the fiber, thermal stability, water absorption capacity, and incompatibility with the polymer matrices. Ecological and economic concerns are animating new research in the field of NFRPCs. Furthermore, considerable research is carried out to improve the performance of NFRPCs in recent years. This review highlights some of the important breakthroughs associated with the NFRPCs in terms of sustainability, eco-friendliness, and economic perspective. It also includes hybridization of NFs with synthetic fibers which is a highly effective way of improving the mechanical properties of NFRPCs along with some chemical treatment procedures. This review also elucidates the significance of using numerical models for NFRPCs. Finally, conclusions and recommendations are drawn to assist the researchers with future research directions.
121 citations
TL;DR: In this paper , a review of biopolymer-based food packaging materials and their composites, their biodegradation mechanisms, and the effect of nano-additives on the food packaging properties are presented.
73 citations
TL;DR: In this article , a review article presents important 4D technologies in conjunction with the underlying functionalities of stimuli-responsive polymer composites, and elucidates the future opportunities of 4D-printed SMPCs in terms of preprogramming knowledge, multi-way SMPC, multimaterial printing, sustainability, and potential applications.
66 citations
TL;DR: An overview of the latest knowledge of different natural and synthetic-based biodegradable polymers and their fiber-reinforced composites is presented in this paper , which discusses different degradation mechanisms of biopolymer-based composites as well as their sustainability aspects.
Abstract: Advancements in polymer science and engineering have helped the scientific community to shift its attention towards the use of environmentally benign materials for reducing the environmental impact of conventional synthetic plastics. Biopolymers are environmentally benign, chemically versatile, sustainable, biocompatible, biodegradable, inherently functional, and ecofriendly materials that exhibit tremendous potential for a wide range of applications including food, electronics, agriculture, textile, biomedical, and cosmetics. This review also inspires the researchers toward more consumption of biopolymer-based composite materials as an alternative to synthetic composite materials. Herein, an overview of the latest knowledge of different natural- and synthetic-based biodegradable polymers and their fiber-reinforced composites is presented. The review discusses different degradation mechanisms of biopolymer-based composites as well as their sustainability aspects. This review also elucidates current challenges, future opportunities, and emerging applications of biopolymeric sustainable composites in numerous engineering fields. Finally, this review proposes biopolymeric sustainable materials as a propitious solution to the contemporary environmental crisis. • Use of biopolymers has emerged as a new paradigm of the ecological conservation. • Biopolymeric composites are easily degraded under the possible source of degraded environment. • Biopolymers have found their applications in biomedical, food, electronics, cosmetics and other emerging fields. • Further understanding on their mode of action through this comprehensive review will imparts knowledge.
64 citations
TL;DR: In this article, a review article comprehensively presents current developments, results, and findings in the arena of green and sustainable materials, and incorporates future challenges and opportunities in the field of nano cellulosic materials.
Abstract: The research interest in sustainable and eco-friendly materials based on natural sources has increased dramatically due to their recyclability, biodegradability, compatibility, and nontoxic behavior. Nanocellulose contains chains of glucose residue and is an abundantly available green material. Recently, nanocellulose-based green composites are under extensive exploration and gained popularity among researchers owing to their lightweight, lost cost, low density, excellent mechanical and physical characteristics. These materials have also shown tremendous potential for applications in biomedical and numerous engineering fields. The mechanical properties of these materials play a vital role in effective utilization and their exploration for future applications. This review article comprehensively presents current developments, results, and findings in the arena of green and sustainable materials. Currently, the main problem is the large variability in their properties and qualities. Nanocellulose properties are influenced by various factors, including the fiber type, ecological conditions, manufacturing methods, and any alteration of the fiber surface. Finally, the review incorporates future challenges and opportunities in the field of nano cellulosic materials.
61 citations
References
More filters
TL;DR: Various fabrication techniques employed for the production of natural fiber reinforced polymer composites are discussed and a detailed review of the research devoted to the analysis of their structure and properties by a variety of characterization techniques are presented.
957 citations
TL;DR: A detailed review of the different types of retting processes, chemical and surface treatments and characterization techniques for natural fibers, and major findings from the literature are summarized.
534 citations
TL;DR: In this paper, the authors have reviewed the different sources of natural fibers, their properties, modification of natural fiber, the effect of treatments on natural fibers and their effective use as reinforcement for polymer composite materials.
Abstract: The increase in awareness of the damage caused by synthetic materials on the environment has led to the development of eco-friendly materials. The researchers have shown a lot of interest in developing such materials which can replace the synthetic materials. As a result, there is an increase in demand for commercial use of the natural fiber-based composites in recent years for various industrial sectors. Natural fibers are sustainable materials which are easily available in nature and have advantages like low-cost, lightweight, renewability, biodegradability and high specific properties. The sustainability of the natural fiber-based composite materials has led to upsurge its applications in various manufacturing sectors. In this paper, we have reviewed the different sources of natural fibers, their properties, modification of natural fibers, the effect of treatments on natural fibers, etc. We also summarize the major applications of natural fibers and their effective use as reinforcement for polymer composite materials.
441 citations
TL;DR: This study shows that the addition of jute fiber and glass fiber in epoxy, increases the density, the impact energy, the tensile strength and the flexural strength, but decreases the loss mass in function of temperature and the water absorption.
168 citations
Abstract: Natural fiber-reinforced polymeric composites are gaining significant attention in engineering applications. The present investigation is an attempt to assess the hybridization effects of different...
133 citations