The catalytic cycle of catechol oxidase
TL;DR: Hybrid density functional theory with the B3LYP functional has been used to investigate the catalytic mechanism of catechol oxidase, and the calculated energetics is in reasonable agreement with experiments.
Abstract: Hybrid density functional theory with the B3LYP functional has been used to investigate the catalytic mechanism of catechol oxidase. Catechol oxidase belongs to a class of enzymes that has a copper dimer with histidine ligands at the active site. Another member of this class is tyrosinase, which has been studied by similar methods previously. An important advantage for the present study compared to the one for tyrosinase is that X-ray crystal structures exist for catechol oxidase. The most critical step in the mechanism for catechol oxidase is where the peroxide O–O bond is cleaved. In the suggested mechanism this cleavage occurs in concert with a proton transfer from the substrate. Shortly after the transition state is passed there is another proton transfer from the substrate, which completes the formation of a water molecule. An important feature of the mechanism, like the one for tyrosinase, is that no proton transfers to or from residues outside the metal complex are needed. The calculated energetics is in reasonable agreement with experiments. Comparisons are made to other similar enzymes studied previously.
Citations
More filters
TL;DR: The most often encountered reaction of the Fe(III)−O2 species is an electrophilic attack on an electron-rich (co)substrate that yields an Fe(II) intermediate with a peroxide bridge between the ferrous ion and an organic molecule (Figure 57).
Abstract: ing a hydrogen atom from substrates with relatively weak X−H bonds (Figure 56). Such a situation was found in the catalytic cycle of ACCO, where cleavage of the N−H bond is facilitated by the ferrous ion capable of (partly) reducing the resulting N-based radical to an anion. In the catalytic cycle of HEPD and in the reaction of HppE with an enantiomer of the native substrate, a C−H bond at the carbon hosting a deprotonated alcohol group is severed by the superoxide. In these cases transfer of a hydrogen atom to the superoxide is coupled to one-electron reduction of Fe(III) to Fe(II), which yields aldehyde or ketone products. In a similar way a thioaldehyde is produced during the initial steps of the IPNS catalytic cycle. Figure 53. Reaction catalyzed by NDO. Figure 54. X-ray structure of the non-heme iron cofactor in the NDO active site (PDB 1O7G). Figure 55. Reaction mechanism for the dihydroxylation reaction catalyzed by NDO suggested on the basis of the results of a DFT study. Relative energy values in kilocalories per mole are given beneath the structures shown and above the arrows for the transition states connecting them. Chemical Reviews Review dx.doi.org/10.1021/cr400388t | Chem. Rev. 2014, 114, 3601−3658 3636 The most often encountered reaction of the Fe(III)−O2 species is an electrophilic attack on an electron-rich (co)substrate that yields an Fe(II) intermediate with a peroxide bridge between the ferrous ion and an organic molecule (Figure 57). In all examples shown in the figure the reactive spin state is a quintet with high-spin Fe(III) antiferromagnetically coupled to the superoxide radical. This particular electronic structure allows for a smooth two-electron reaction, leading to a ferrous intermediate featuring a high-spin Fe(II) ion, i.e., also lying on a quintet PES. When the substrates are easily one-electron-oxidized, as, for example, carotenoids or catecholates, already the ternary enzyme−dioxygen−organic substrate complex may contain an organic radical along with the superoxide anion stabilized by coordination to the metal (Figure 58). With proper (antiferromagnetic) alignment of the spins of the unpaired electrons on the two radicals, direct coupling between them proceeds with a straightforward formation of a new C−O bond. With the O2 ligand already protonated, several different reaction scenarios are usually plausible, and one of them, arguably the simplest, involves a transfer of the HOO group from the metal ion to the organic substrate (Figure 59). In the reaction of HEPD, it is the distal, i.e., originally protonated, oxygen atom that attacks the aldehyde group and the proton is transferred to the second (proximal) oxygen atom with the help of a phosphonic group of the substrate. In this reaction HOO acts as a nucleophile. In the case of HGD, the HOO ligand has a partial radical character, and hence, in its attack on the aromatic ring, it behaves as an electrophilic reagent. Moreover, in the HGD and ACO cases, it is the proximal oxygen atom that is directly transferred from the metal ion to the organic radical, i.e., the proton remains on the same oxygen atom throughout the reaction. When a catalytic reaction involves a homolytic O−O bond cleavage, one end of the peroxo group is in contact with the metal ion, and it is reduced to HO− or RO− when the O−O bond breaks (Figure 60). The electron required for the reduction is provided usually by the ferrous ion; in intradiol dioxygenases, which host Fe(III) in the active site, a tyrosinate ligand can serve as a reductant. Heterolytic cleavage of the O−O bond typically yields highvalent iron(IV)−oxo species, and such a reaction requires Fe(II), a deprotonated proximal oxygen atom, and usually also that the distal oxygen atom has a chance to develop a second covalent bond when the O−O gets broken (Figure 61). The bonding partner for the distal oxygen can be a hydrogen (PDHs, IPNS, ACCO) or a (co)substrate’s carbon (αKAOs, ACO, Dke1) atom. Heterolysis to Fe(IV)O usually proceeds on the quintet PES. Finally, heterolytic O−O bond cleavage may proceed without changing the oxidation state of the metal but instead with coupled two-electron oxidation of an organic substrate (Figure Figure 56. Examples of Fe(II)/Fe(III)−O2 reactions involving hydrogen atom abstraction. Only the most relevant fragment of the substrate is shown. Figure 57. Examples of Fe(III)−O2 reactions involving electrophilic attack and two-electron oxidation of an organic (co)substrate. Figure 58. Examples of Fe(II)/Fe(III)−O2 reactions involving radical coupling between the superoxide and an organic radical. Only the most relevant fragment of the substrate is shown. Chemical Reviews Review dx.doi.org/10.1021/cr400388t | Chem. Rev. 2014, 114, 3601−3658 3637 62). In both cases depicted in the figure, a hydroperoxo group is bound to high-spin Fe(III), and when theO−Obond cleaves, the OH group remains on iron and the other oxygen atom forms two covalent bonds with the organic substrate. This kind of heterolytic O−O cleavage requires that the donor orbital of the organic substrate, i.e., the one that provides two electrons for reduction of the peroxo group, has a good overlap with the O−O σ* orbital. 5.2. Dinuclear Non-Heme Iron Enzymes 5.2.1. Methane Monooxygenase. MMO is an enzyme which inserts one oxygen from O2 into methane to form methanol. The active site of the soluble form of MMO is shown in Figure 63. It contains an iron dimer complex linked by oxygen-derived ligands and has four glutamates and two histidines. Due to the presence of a well-resolved X-ray structure, and the technical importance of the reaction catalyzed, this was actually the first redox-active enzymemechanism that was treated with the cluster model using modern DFT functionals in 1997. Several groups were active at an early stage, and the most essential parts of the reaction mechanism were determined more than a decade ago. A comprehensive review of this development was written by Friesner et al. In short, the active species (compound Q) has a diamond core structure with two bridging oxo groups and is in an Fe2(IV,IV) state, one of themost oxidized species in nature. One of the oxo groups of compound Q activates nethane by an abstraction of one hydrogen atom. The TS is linear in C···H···O to form an Fe2(III,IV) state and amethyl radical. The loss of entropy at the TS is a large part of the barrier. In the second step, the methyl radical recombines with the bridging hydroxide formed in the first step. The TS for this step was first located by Basch et al. This rebound mechanism was criticized by interpretations of radical clock experiments, which appeared to show that there could not be a sufficiently long-lived alkyl radical to be consistent with a two-step mechanism. A concerted mechanism with simultaneous cleavage of the C−H bond and formation of the C−O bond was therefore suggested. Several explanations were suggested to resolve this apparent discrepancy between experiment and theory. In one of them, it was concluded that the radical clock probe molecules Figure 59. Examples of HOO transfer reactions. Only the most relevant fragment of the substrate is shown. Figure 60. Examples of O−O bond homolysis facilitated by oneelectron reduction of the proximal oxygen atom. Only the most relevant fragment of the substrate is shown. Figure 61. Examples of heterolytic O−O bond cleavage yielding iron(IV)−oxo species. Figure 62. Examples of heterolytic O−Obond cleavage proceeding with direct two-electron oxidation of the organic molecule. Chemical Reviews Review dx.doi.org/10.1021/cr400388t | Chem. Rev. 2014, 114, 3601−3658 3638 were chemically so different from methane that different mechanisms were likely. The probes are much easier to ionize and could form cations instead of radicals. Another suggestion was a so-called two-channel mechanism of the dynamics involving a bound radical intermediate. A third possibility could be something analogous to the two-state reactivity mechanism suggested for P450 to explain similar discrepancies in that case, but this has not been tested. In summary, a concerted mechanism, as suggested by the experiments, has never been found in DFT modeling calculations for methane hydroxylation by MMO, at least when reasonable models have been tried, and the suggestion has therefore not survived. In the initial phase of the MMO studies, there were problems converging to proper electronic states. These problems were solved by Friesner et al., who were able to obtain the correct antiferromagnetic coupling of compound Q with two high-spin irons. A state of key importance is also the first intermediate after Q, with an electronic structure characterized as Fe2(III,IV)− O•, discussed further below in connection with mixedMn−Fe dimers. It was found that already at the TS for hydrogen abstraction the iron dimer is in an Fe2(III,IV) state as it is in the product of this step. The bridging oxygen radical would then act as a hydrogen atom abstractor. At the TS, the spins are divided between a bridging oxo ligand and the methyl, while the iron spins stay essentially constant from the Fe2(III,IV)−O state to the product. The O−O bond cleavage to reach compound Q is also a significant step in the catalytic cycle. Again, several groups were involved in studying this step at an early stage. There was essential agreement among these studies on the mechanism. First, a peroxide (compound P) is formed between the two irons in an Fe2(III,III) state. Several different structures of P are nearly degenerate. In the TS for the O−O cleavage, the oxygens are symmetric, but only one of the irons is redox-active. In the final Figure 63. Active site of methane monooxygenase. Figure 64. R1 and R2 proteins in RNR. Chemical Reviews Review dx.doi.org/10.1021/cr400388t | Chem. Rev. 2014, 114, 3601−3658 3639 stage, the other iron also changes its oxidation state to IV, and compound Q is formed. In the study by Friesner et al.,
457 citations
TL;DR: This critical review extensively discusses the synthetic models of catechol oxidase, with a particular emphasis on the different approaches used in the literature to study the mechanism of the catalytic oxidation of the substrate (catechol) by these compounds.
Abstract: The ability of copper proteins to process dioxygen at ambient conditions has inspired numerous research groups to study their structural, spectroscopic and catalytic properties. Catechol oxidase is a type-3 copper enzyme usually encountered in plant tissues and in some insects and crustaceans. It catalyzes the conversion of a large number of catechols into the respective o-benzoquinones, which subsequently auto-polymerize, resulting in the formation of melanin, a dark pigment thought to protect a damaged tissue from pathogens. After the report of the X-ray crystal structure of catechol oxidase a few years earlier, a large number of publications devoted to the biomimetic modeling of its active site appeared in the literature. This critical review (citing 114 references) extensively discusses the synthetic models of this enzyme, with a particular emphasis on the different approaches used in the literature to study the mechanism of the catalytic oxidation of the substrate (catechol) by these compounds. These are the studies on the substrate binding to the model complexes, the structure–activity relationship, the kinetic studies of the catalytic oxidation of the substrate and finally the substrate interaction with (per)oxo-dicopper adducts. The general overview of the recognized types of copper proteins and the detailed description of the crystal structure of catechol oxidase, as well as the proposed mechanisms of the enzymatic cycle are also presented.
447 citations
TL;DR: The biomimetic studies strongly suggest that among the various metal ions probed for modeling the catalytic activity of CO and PHS, MnII/III based systems are so far the most promising candidates apart from the nature's choice CuII.
188 citations
TL;DR: The most relevant research in which copper promotes or catalyzes the functionalization of organic molecules, including biological catalysis, bioinspired model systems, and organometallic reactivity is summarized.
Abstract: Copper is one of the most abundant and less toxic transition metals. Nature takes advantage of the bioavailability and rich redox chemistry of Cu to carry out oxygenase and oxidase organic transformations using O2 (or H2O2) as oxidant. Inspired by the reactivity of these Cu-dependent metalloenzymes, chemists have developed synthetic protocols to functionalize organic molecules under enviormentally benign conditions. Copper also promotes other transformations usually catalyzed by 4d and 5d transition metals (Pd, Pt, Rh, etc.) such as nitrene insertions or C-C and C-heteroatom coupling reactions. In this review, we summarized the most relevant research in which copper promotes or catalyzes the functionalization of organic molecules, including biological catalysis, bioinspired model systems, and organometallic reactivity. The reaction mechanisms by which these processes take place are discussed in detail.
166 citations
TL;DR: 1 is observed to be effective even in TCC oxidation, a process never reported earlier, and a treatment on the basis of Michaelis-Menten model has been applied for kinetic study, suggesting that all five complexes exhibit very high turnover number.
Abstract: A series of dinuclear copper(II) complexes has been synthesized with the aim to investigate their applicability as potential structure and function models for the active site of catechol oxidase enzyme. They have been characterized by routine physicochemical techniques as well as by X-ray single-crystal structure analysis: [Cu2(H2L22)(OH)(H2O)(NO3)](NO3)3·2H2O (1), [Cu(HL14)(H2O)(NO3)]2(NO3)2·2H2O (2), [Cu(L11)(H2O)(NO3)]2 (3), [Cu2(L23)(OH)(H2O)2](NO3)2, (4) and [Cu2(L21)(N3)3] (5) [L1 = 2-formyl-4-methyl-6R-iminomethyl-phenolato and L2 = 2,6-bis(R-iminomethyl)-4-methyl-phenolato; for L11 and L21, R = N-propylmorpholine; for L22, R = N-ethylpiperazine; for L23, R = N-ethylpyrrolidine, and for L14, R = N-ethylmorpholine]. Dinuclear 1 and 4 possess two “end-off” compartmental ligands with exogenous μ-hydroxido and endogenous μ-phenoxido groups leading to intermetallic distances of 2.9794(15) and 2.9435(9) A, respectively; 2 and 3 are formed by two tridentate compartmental ligands where the copper centers a...
165 citations
References
More filters
TL;DR: In this article, a semi-empirical exchange correlation functional with local spin density, gradient, and exact exchange terms was proposed. But this functional performed significantly better than previous functionals with gradient corrections only, and fits experimental atomization energies with an impressively small average absolute deviation of 2.4 kcal/mol.
Abstract: Despite the remarkable thermochemical accuracy of Kohn–Sham density‐functional theories with gradient corrections for exchange‐correlation [see, for example, A. D. Becke, J. Chem. Phys. 96, 2155 (1992)], we believe that further improvements are unlikely unless exact‐exchange information is considered. Arguments to support this view are presented, and a semiempirical exchange‐correlation functional containing local‐spin‐density, gradient, and exact‐exchange terms is tested on 56 atomization energies, 42 ionization potentials, 8 proton affinities, and 10 total atomic energies of first‐ and second‐row systems. This functional performs significantly better than previous functionals with gradient corrections only, and fits experimental atomization energies with an impressively small average absolute deviation of 2.4 kcal/mol.
87,732 citations
TL;DR: This work reports a gradient-corrected exchange-energy functional, containing only one parameter, that fits the exact Hartree-Fock exchange energies of a wide variety of atomic systems with remarkable accuracy, surpassing the performance of previous functionals containing two parameters or more.
Abstract: Current gradient-corrected density-functional approximations for the exchange energies of atomic and molecular systems fail to reproduce the correct 1/r asymptotic behavior of the exchange-energy density. Here we report a gradient-corrected exchange-energy functional with the proper asymptotic limit. Our functional, containing only one parameter, fits the exact Hartree-Fock exchange energies of a wide variety of atomic systems with remarkable accuracy, surpassing the performance of previous functionals containing two parameters or more.
45,683 citations
TL;DR: In this article, a new coupling of Hartree-Fock theory with local density functional theory was proposed to improve the predictive power of the Hartree−Fock model for molecular bonding, and the results of tests on atomization energies, ionization potentials, and proton affinities were reported.
Abstract: Previous attempts to combine Hartree–Fock theory with local density‐functional theory have been unsuccessful in applications to molecular bonding. We derive a new coupling of these two theories that maintains their simplicity and computational efficiency, and yet greatly improves their predictive power. Very encouraging results of tests on atomization energies, ionization potentials, and proton affinities are reported, and the potential for future development is discussed.
13,853 citations
TL;DR: In this article, effective core potentials (ECP) have been derived to replace the innermost core electron for third row (K), fourth row (Rb-Ag), and fifth row (Cs-Au) atoms.
Abstract: Ab initio effective core potentials (ECP’s) have been generated to replace the innermost core electron for third‐row (K–Au), fourth‐row (Rb–Ag), and fifth‐row (Cs–Au) atoms The outermost core orbitals—corresponding to the ns2np6 configuration for the three rows here—are not replaced by the ECP but are treated on an equal footing with the nd, (n+1)s and (n+1)p valence orbitals These ECP’s have been derived for use in molecular calculations where these outer core orbitals need to be treated explicitly rather than to be replaced by an ECP The ECP’s for the forth and fifth rows also incorporate the mass–velocity and Darwin relativistic effects into the potentials Analytic fits to the potentials are presented for use in multicenter integral evaluation Gaussian orbital valence basis sets are developed for the (3s, 3p, 3d, 4s, 4p), (4s, 4p, 4d, 5s, 5p), and (5s, 5p, 5d, 6s, 6p) ortibals of the three respective rows
13,717 citations
TL;DR: Copper sites have historically been divided into three classes based on their spectroscopic features, which reflect the geometric and electronic structure of the active site: type 1 or blue copper, type 2 (T2) or normal copper, and type 3 (T3) or coupled binuclear copper centers.
Abstract: Copper is an essential trace element in living systems, present in the parts per million concentration range. It is a key cofactor in a diverse array of biological oxidation-reduction reactions. These involve either outer-sphere electron transfer, as in the blue copper proteins and the Cu{sub A} site of cytochrome oxidase and nitrous oxide redutase, or inner-sphere electron transfer in the binding, activation, and reduction of dioxygen, superoxide, nitrite, and nitrous oxide. Copper sites have historically been divided into three classes based on their spectroscopic features, which reflect the geometric and electronic structure of the active site: type 1 (T1) or blue copper, type 2 (T2) or normal copper, and type 3 (T3) or coupled binuclear copper centers. 428 refs.
3,241 citations