The cutting-edge phosphorus-rich metal phosphides for energy storage and conversion
TL;DR: In this article, a review summarizes the up-to-date advances of P-rich metal phosphides (MPs) in energy storage and conversion from typical structures, main synthetic methods and diversified advanced applications.
About: This article is published in Nano Today.The article was published on 2021-10-01. It has received 32 citations till now. The article focuses on the topics: Energy storage.
Citations
More filters
TL;DR: In this article, the effect of second metal on the OER performance of Co-based bimetallic MOFs was analyzed and suggested that tuning the electronic structure of the metal site can be an effective strategy for other MOFs-based OER catalysts.
Abstract: Co-based bimetallic metal-organic frameworks (MOFs) have emerged as a kind of promising electrocatalyst for oxygen evolution reaction (OER). However, most of present works for Co-based bimetallic MOFs are still in try-and-wrong stage, while the OER performance trend and the underlying structure-function relationship remain unclear. To address this challenge, Co-based MOFs on carbon cloth (CC) (CoM MOFs/CC, M = Zn, Ni, and Cu) are prepared through a room-temperature method, and their structure and OER performance are compared systematically. Based on the results of overpotential and Tafel slope, the order of OER activity is ordered in the decreasing sequence: CoZn MOF > CoNi MOF > CoCu MOF > Co MOF. Spectroscopic studies clearly show that the better OER performance of CoM MOFs results from the higher oxidation state of Co, which is related to the choice of second metal. Theoretical calculations indicate that CoZn MOFs possess strengthened adsorption for O-containing intermediate, and lower energy barrier towards OER. This study figures out the effect of second metal on the OER performance of Co-based bimetallic MOFs and suggests that tuning the electronic structure of the metal site can be an effective strategy for other MOFs-based OER catalysts.
54 citations
TL;DR: In this paper, a 2D/3D nanostructure with abundant interface defects was developed by in-situ phosphorization and rapid surface reconstruction strategies for use as an efficient electrocatalyst toward overall water splitting.
32 citations
TL;DR: In this article , a 2D/3D structure of CoNi bimetallic phosphides was developed by in-situ phosphorization and rapid surface reconstruction strategies for use as an efficient electrocatalyst toward overall water splitting.
32 citations
TL;DR: The development of high-performance and earth-abundant catalysts is imperative for the oxygen evolution reaction (OER), and mesoporous oxyhydroxides show huge potential as advanced catalysts toward OER due to large specific surface area as discussed by the authors .
Abstract: Development of high-performance and earth-abundant catalysts is imperative for the oxygen evolution reaction (OER), and mesoporous oxyhydroxides show huge potential as advanced catalysts toward OER due to large specific surface...
19 citations
TL;DR: In this paper , Ni 2 P nanoparticles are embedded in porous carbon matrix through covalent chemical bonding of C-O-Ni and C-P. The authors showed that such efficient interfacial chemical linkage could weaken TM-P bonds and bridge the gap between Ni 2P nanoparticles and carbon matrix, thus promoting the conversion reversibility during charge/discharge reactions.
18 citations
References
More filters
TL;DR: Recent advances in strategies for advanced metal oxide-based hybrid nanostructure design are reviewed, with the focus on the binder-free film/array electrodes that can provide larger electrochemically active surface area, faster electron transport and superior ion diffusion, thus leading to substantially improved cycling and rate performance.
Abstract: Metal oxide nanostructures are promising electrode materials for lithium-ion batteries and supercapacitors because of their high specific capacity/capacitance, typically 2-3 times higher than that of the carbon/graphite-based materials. However, their cycling stability and rate performance still can not meet the requirements of practical applications. It is therefore urgent to improve their overall device performance, which depends on not only the development of advanced electrode materials but also in a large part "how to design superior electrode architectures". In the article, we will review recent advances in strategies for advanced metal oxide-based hybrid nanostructure design, with the focus on the binder-free film/array electrodes. These binder-free electrodes, with the integration of unique merits of each component, can provide larger electrochemically active surface area, faster electron transport and superior ion diffusion, thus leading to substantially improved cycling and rate performance. Several recently emerged concepts of using ordered nanostructure arrays, synergetic core-shell structures, nanostructured current collectors, and flexible paper/textile electrodes will be highlighted, pointing out advantages and challenges where appropriate. Some future electrode design trends and directions are also discussed.
2,176 citations
TL;DR: An overview of recent development of TMP nanomaterials as catalysts for hydrogen generation with high activity and stability is presented, and specific strategies to further improve the catalytic efficiency and stability of T MPs by structural engineering are demonstrated.
Abstract: The urgent need of clean and renewable energy drives the exploration of effective strategies to produce molecular hydrogen. With the assistance of highly active non-noble metal electrocatalysts, electrolysis of water is becoming a promising candidate to generate pure hydrogen with low cost and high efficiency. Very recently, transition metal phosphides (TMPs) have been proven to be high performance catalysts with high activity, high stability, and nearly ∼100% Faradic efficiency in not only strong acidic solutions, but also in strong alkaline and neutral media for electrochemical hydrogen evolution. In this tutorial review, an overview of recent development of TMP nanomaterials as catalysts for hydrogen generation with high activity and stability is presented. The effects of phosphorus (P) on HER activity, and their synthetic methods of TMPs are briefly discussed. Then we will demonstrate the specific strategies to further improve the catalytic efficiency and stability of TMPs by structural engineering. Making use of TMPs as cocatalysts and catalysts in photochemical and photoelectrochemical water splitting is also discussed. Finally, some key challenges and issues which should not be ignored during the rapid development of TMPs are pointed out. These strategies and challenges of TMPs are instructive for designing other high-performance non-noble metal catalysts.
2,104 citations
TL;DR: The topotactic fabrication of self-supported nanoporous cobalt phosphide nanowire arrays on carbon cloth via low-temperature phosphidation of the corresponding Co(OH)F/CC precursor offers excellent catalytic performance and durability under neutral and basic conditions.
Abstract: In this Communication, we report the topotactic fabrication of self-supported nanoporous cobalt phosphide nanowire arrays on carbon cloth (CoP/CC) via low-temperature phosphidation of the corresponding Co(OH)F/CC precursor. The CoP/CC, as a robust integrated 3D hydrogen-evolving cathode, shows a low onset overpotential of 38 mV and a small Tafel slope of 51 mV dec–1, and it maintains its catalytic activity for at least 80 000 s in acidic media. It needs overpotentials (η) of 67, 100, and 204 mV to attain current densities of 10, 20, and 100 mA cm–2, respectively. Additionally, this electrode offers excellent catalytic performance and durability under neutral and basic conditions.
2,063 citations
TL;DR: This review summarizes the current trends and provides guidelines towards achieving next-generation rechargeable Li and Li-ion batteries with higher energy densities, better safety characteristics, lower cost and longer cycle life by addressing batteries using high-voltage cathodes, metal fluoride electrodes, chalcogen electrodes, Li metal anodes, high-capacity anodes as well as useful electrolyte solutions.
Abstract: Commercial lithium-ion (Li-ion) batteries suffer from low energy density and do not meet the growing demands of the energy storage market. Therefore, building next-generation rechargeable Li and Li-ion batteries with higher energy densities, better safety characteristics, lower cost and longer cycle life is of outmost importance. To achieve smaller and lighter next-generation rechargeable Li and Li-ion batteries that can outperform commercial Li-ion batteries, several new energy storage chemistries are being extensively studied. In this review, we summarize the current trends and provide guidelines towards achieving this goal, by addressing batteries using high-voltage cathodes, metal fluoride electrodes, chalcogen electrodes, Li metal anodes, high-capacity anodes as well as useful electrolyte solutions. We discuss the choice of active materials, practically achievable energy densities and challenges faced by the respective battery systems. Furthermore, strategies to overcome remaining challenges for achieving energy characteristics are addressed in the hope of providing a useful and balanced assessment of current status and perspectives of rechargeable Li and Li-ion batteries.
1,086 citations
TL;DR: Focusing on self-supported electrodes, the latest advances in their structural design, controllable synthesis, mechanistic understanding, and strategies for performance enhancement are presented.
Abstract: Electrochemical water splitting is a promising technology for sustainable conversion, storage, and transport of hydrogen energy. Searching for earth-abundant hydrogen/oxygen evolution reaction (HER/OER) electrocatalysts with high activity and durability to replace noble-metal-based catalysts plays paramount importance in the scalable application of water electrolysis. A freestanding electrode architecture is highly attractive as compared to the conventional coated powdery form because of enhanced kinetics and stability. Herein, recent progress in developing transition-metal-based HER/OER electrocatalytic materials is reviewed with selected examples of chalcogenides, phosphides, carbides, nitrides, alloys, phosphates, oxides, hydroxides, and oxyhydroxides. Focusing on self-supported electrodes, the latest advances in their structural design, controllable synthesis, mechanistic understanding, and strategies for performance enhancement are presented. Remaining challenges and future perspectives for the further development of self-supported electrocatalysts are also discussed.
1,015 citations