The impact of a vortex ring on a wall
TL;DR: In this article, the flow induced by a vortex ring approaching a plane wall on a trajectory normal to the wall is investigated for an incompressible fluid, which is otherwise stagnant.
Abstract: The flow induced by a vortex ring approaching a plane wall on a trajectory normal to the wall is investigated for an incompressible fluid which is otherwise stagnant. The detailed characteristics of the interaction of the ring with the flow near the surface have been observed experimentally for a wide variety of laminar rings, using dye in water to visualize the flow in the ring as well as near the plane surface. Numerical solutions are obtained for the trajectory of the ring as well as for the unsteady boundary-layer flow that develops on the wall. The experimental and theoretical results show that an unsteady separation develops in the boundary-layer flow, in the form of a secondary ring attached to the wall. A period of explosive boundary-layer growth then ensues and a strong viscous-inviscid interaction occurs in the form of the ejection of the secondary vortex ring from the boundary layer. The primary ring then interacts with the secondary ring and in some cases was observed to induce the formation of a third, tertiary, ring near the wall. The details of this process are investigated over a wide Reynolds number range. The results clearly show how one vortex ring can produce another, through an unsteady interaction with a viscous flow near the wall.
Citations
More filters
TL;DR: A model of the dynamic physical processes that occur in the near-wall region of a turbulent flow at high Reynolds numbers is described in this paper, where the hairpin vortex is postulated to be the basic flow structure of the turbulent boundary layer.
Abstract: A model of the dynamic physical processes that occur in the near-wall region of a turbulent flow at high Reynolds numbers is described The hairpin vortex is postulated to be the basic flow structure of the turbulent boundary layer It is argued that the central features of the near-wall flow can be explained in terms of how asymmetric hairpin vortices interact with the background shear flow, with each other, and with the surface layer near the wall The physical process that leads to the regeneration of new hairpin vortices near the surface is described, as well as the processes of evolution of such vortices to larger-scale motions farther from the surface The model is supported by recent important developments in the theory of unsteady surface-layer separation and a number of `kernel' experiments which serve to elucidate the basic fluid mechanics phenomena believed to be relevant to the turbulent boundary layer Explanations for the kinematical behaviour observed in direct numerical simulations of low Reynolds number boundary-layer and channel flows are given An important aspect of the model is that it has been formulated to be consistent with accepted rational mechanics concepts that are known to provide a proper mathematical description of high Reynolds number flow
298 citations
TL;DR: In this paper, the authors focus on the underlying flow physics, with the aim of clarifying the origin of the induced loading of vortex interactions and developing creative strategies, distinct from those traditionally employed for control of unstable shear flows.
Abstract: ▪ Abstract Interaction of a vortex, or combinations of them, with a cylinder, blade, or foil may involve both rapid distortion of the incident vorticity field and shedding of vorticity from the surface of the body. This review focuses on the underlying flow physics, with the aim of clarifying the origin of the induced loading. In the case of near or direct encounter of the incident vortex, the relation between three-dimensional features of the flow structure and the local loading poses interesting challenges for further research. With recently developed simulation and laboratory techniques, opportunities now exist to determine the instantaneous quantitative structure of these complex distortions and to interpret them within a theoretical, vorticity-based framework. Effective control of vortex interactions appears to be attainable. It will be necessary, however, to develop creative strategies, distinct from those traditionally employed for control of unstable shear flows.
264 citations
TL;DR: In this article, the effects of hyperbolic nozzle geometry on the local heat-transfer coefficients for confined impinging air jets were investigated and compared with similar experiments for unconfined jets.
241 citations
TL;DR: In this paper, a numerical simulation of the first dipole rebound from the wall agrees with experimental visualizations, and each rebound is associated with the detachment of a secondary vorticity layer from a wall, these layers merge, and at a value of Reynolds number Re=1600, form a new dipole.
Abstract: Accurate numerical simulations of vortex dipoles impinging on flat boundaries have revealed interesting new features. In the case of free‐slip boundaries the dipole does not rebound from the wall. In the case of nonslip walls rebounding occurs and complex interactions of secondary and tertiary vortices appear. The numerical simulation of the first dipole rebound from the wall agrees with experimental visualizations. Numerical experiments extending in time beyond the real experiments show multiple rebounding. Each rebound is associated with the detachment of a secondary vorticity layer from the wall, these layers merge, and at a value of Reynolds number Re=1600, form a new dipole. This dipole has sufficient circulation to induce on itself a motion in the opposite direction to the motion of the initial dipole.
241 citations
TL;DR: In this paper, the spectral element-fourier method was used to simulate the flow in a channel with its lower wall mounted with streamwise riblets, and the results indicated that in the laminar regime there is no drag reduction, while in the transitional and turbulent regimes drag reduction exists (approximately 6 % at Reynolds number 3500) for the riblet-mounted wall in comparison with the smooth wall of the channel.
Abstract: The flow in a channel with its lower wall mounted with streamwise riblets is simulated using a highly efficient spectral element-Fourier method. The range of Reynolds numbers investigated is 500 to 3500, which corresponds to laminar, transitional, and turbulent flow states. A complete study is presented for V-groove riblets; the effect of rounded riblets is also investigated. Our results suggest that in the laminar regime there is no drag reduction, while in the transitional and turbulent regimes drag reduction exists (approximately 6 % at Reynolds number 3500) for the riblet-mounted wall in comparison with the smooth wall of the channel. For the first time, we present detailed turbulent statistics (turbulence intensities, Reynolds shear stresses, skewness and flatness) as well as a temporal analysis using a numerical analog of the VITA technique. The flow structure over the riblet-mounted wall is also analysed in some detail and compared with the corresponding flow over the smooth wall in an attempt to identify the physical mechanisms that cause drag reduction. The accuracy of the computation is established by comparing flow quantities corresponding to the smooth wall with previous direct numerical simulation results as well as with experimental results; on the riblet-mounted wall comparison is made with available experimental results. The agreement is very good for both cases. The current computation is the first direct numerical simulation of turbulence in a complex geometry domain.
185 citations
References
More filters
TL;DR: Recent progress in the development of vortex methods and their applications to the numerical simulation of incompressible fluid flows are reviewed in this article, with a focus on recent results concerning the accuracy of these methods, improvements in computational efficiency, and development of three-dimensional vortex methods.
928 citations
TL;DR: In this article, a high-speed video system and hydrogen bubble-wire flow visualization was used to investigate the characteristics of low-speed streaks which occur in the near-wall region of turbulent boundary layers.
Abstract: Employing a high-speed video system and hydrogen bubble-wire flow visualization, the characteristics of the low-speed streaks which occur in the near-wall region of turbulent boundary layers have been examined for a Reynolds-number range of 740 [les ] Reθ < 5830. The results indicate that the statistics of non-dimensional spanwise streak spacing are essentially invariant with Reynolds number, exhibiting consistent values of and remarkably similar probability distributions conforming to lognormal behaviour. Further studies show that streak spacing increases with distance from the wall owing to a merging and intermittency process which occurs for y+ [simg ] 5. An additional observation is that, although low-speed streaks are not fixed in time and space, they demonstrate a tremendous persistence, often maintaining their integrity and reinforcing themselves for time periods up to an order of magnitude longer than the observed bursting times associated with wall region turbulence production. A mechanism for the formation of low-speed streaks is suggested which may explain both the observed merging behaviour and the streak persistence.
621 citations
TL;DR: In this article, the hairpin vortices generated by the interaction of a hemisphere protuberancee within a developing laminar boundary layer were examined and the shedding characteristics of the hemispheres were determined using hot-film-anemometry techniques.
Abstract: It has been suggested that hairpin vortices may play a key role in developing and sustaining the turbulence process in the near-wall region of turbulent boundary layers. To examine this suggestion, a study was done of the hairpin vortices generated by the interaction of a hemisphere protuberancee within a developing laminar boundary layer. Under the proper conditions, hairpin vortices are shed extremely periodically, which allows detailed examination of their behaviour. Shedding characteristics of the hemispheres were determined using hot-film-anemometry techniques. The flow patterns created by the presence of the hairpin vortices have been documented using flow visualization and hot-film-anemometry techniques, and cross-compared with the patterns observed in the near-wall of a fully turbulent boundary layer. In general, it has been observed that many of the visual patterns observed in the near-wall region of a turbulent boundary layer can also be observed in the wake of the hairpin-shedding hemisphere, which appears supportive of the importance of hairpin vortices in the near-wall turbulence production process. Furthermore, velocity measurements indicate the presence of strong inflexional profiles just downstream of the hairpin-vortex generation region which evolve into fuller profiles with downstream distance, eventually developing a remarkable similarity to a turbulent-boundary-layer velocity profile.
499 citations
TL;DR: In this article, the techniques, capabilities and applicability of numerical models of three-dimensional, unsteady vortical flows with high Re are assessed, along with Lagrangian vortex elements, which may be of use in modelling the rotational part of flows around bluff bodies, nonuniform density flows and chemically reacting flows.
Abstract: The techniques, capabilities and applicability of numerical models of three-dimensional, unsteady vortical flows with high Re are assessed. Vorticity is calculated only in appropriate regions and the velocity field is derived from the boundary conditions. Vorticity is assumed to take the shape of tubes with uniform core structures in the case of turbulence. The efforts being made to simplify equations for dense collections of vortex filaments in order to make them tractable to computer simulations are described. The effectiveness of vorticity arrow representations for accurately describing vorticity fields near surfaces is discussed, along with Lagrangian vortex elements, which may be of use in modelling the rotational part of flows around bluff bodies, nonuniform density flows and chemically reacting flows.
431 citations