The rise of low-cost sensing for managing air pollution in cities
01 Feb 2015-
TL;DR: In this article, the authors illustrate the drivers behind current rises in the use of low-cost sensors for air pollution management in cities, whilst addressing the major challenges for their effective implementation.
Abstract: Ever growing populations in cities are associated with a major increase in road vehicles and air pollution. The overall high levels of urban air pollution have been shown to be of a significant risk to city dwellers. However, the impacts of very high but temporally and spatially restricted pollution, and thus exposure, are still poorly understood. Conventional approaches to air quality monitoring are based on networks of static and sparse measurement stations. However, these are prohibitively expensive to capture tempo-spatial heterogeneity and identify pollution hotspots, which is required for the development of robust real-time strategies for exposure control. Current progress in developing low-cost micro-scale sensing technology is radically changing the conventional approach to allow real-time information in a capillary form. But the question remains whether there is value in the less accurate data they generate. This article illustrates the drivers behind current rises in the use of low-cost sensors for air pollution management in cities, whilst addressing the major challenges for their effective implementation.
Citations
More filters
Queensland University of Technology1, Norwegian Institute for Air Research2, United States Environmental Protection Agency3, University of Surrey4, Hong Kong University of Science and Technology5, Hong Kong Environmental Protection Department6, City University of Hong Kong7, Curtin University8, Southern Cross University9
TL;DR: In this article, the authors conducted a comprehensive literature search including both the scientific and grey literature, and concluded that there is no clear answer to the question, due to a lack of: sensor/monitor manufacturers' quantitative specifications of performance, consensus regarding recommended end-use and associated minimal performance targets of these technologies, and the ability of the prospective users to formulate the requirements for their applications, or conditions of the intended use.
Abstract: Over the past decade, a range of sensor technologies became available on the market, enabling a revolutionary shift in air pollution monitoring and assessment. With their cost of up to three orders of magnitude lower than standard/reference instruments, many avenues for applications have opened up. In particular, broader participation in air quality discussion and utilisation of information on air pollution by communities has become possible. However, many questions have been also asked about the actual benefits of these technologies. To address this issue, we conducted a comprehensive literature search including both the scientific and grey literature. We focused upon two questions: (1) Are these technologies fit for the various purposes envisaged? and (2) How far have these technologies and their applications progressed to provide answers and solutions? Regarding the former, we concluded that there is no clear answer to the question, due to a lack of: sensor/monitor manufacturers' quantitative specifications of performance, consensus regarding recommended end-use and associated minimal performance targets of these technologies, and the ability of the prospective users to formulate the requirements for their applications, or conditions of the intended use. Numerous studies have assessed and reported sensor/monitor performance under a range of specific conditions, and in many cases the performance was concluded to be satisfactory. The specific use cases for sensors/monitors included outdoor in a stationary mode, outdoor in a mobile mode, indoor environments and personal monitoring. Under certain conditions of application, project goals, and monitoring environments, some sensors/monitors were fit for a specific purpose. Based on analysis of 17 large projects, which reached applied outcome stage, and typically conducted by consortia of organizations, we observed that a sizable fraction of them (~ 30%) were commercial and/or crowd-funded. This fact by itself signals a paradigm change in air quality monitoring, which previously had been primarily implemented by government organizations. An additional paradigm-shift indicator is the growing use of machine learning or other advanced data processing approaches to improve sensor/monitor agreement with reference monitors. There is still some way to go in enhancing application of the technologies for source apportionment, which is of particular necessity and urgency in developing countries. Also, there has been somewhat less progress in wide-scale monitoring of personal exposures. However, it can be argued that with a significant future expansion of monitoring networks, including indoor environments, there may be less need for wearable or portable sensors/monitors to assess personal exposure. Traditional personal monitoring would still be valuable where spatial variability of pollutants of interest is at a finer resolution than the monitoring network can resolve.
138 citations
Journal Article•
TL;DR: Forouzanfar et al. as discussed by the authors provide a review of the new air pollution sensing methods to determine indoor air quality and discuss how real-time sensing could bring a paradigm shift in controlling the concentration of key air pollutants in billions of urban houses worldwide.
Abstract: Household air pollution is ranked the 9th largest Global Burden of Disease risk (Forouzanfar et al., The Lancet 2015). People, particularly urban dwellers, typically spend over 90% of their daily time indoors, where levels of air pollution often surpass those of outdoor environments. Indoor air quality (IAQ) standards and approaches for assessment and control of indoor air require measurements of pollutant concentrations and thermal comfort using conventional instruments. However, the outcomes of such measurements are usually averages over long integrated time periods, which become available after the exposure has already occurred. Moreover, conventional monitoring is generally incapable of addressing temporal and spatial heterogeneity of indoor air pollution, or providing information on peak exposures that occur when specific indoor sources are in operation. This article provides a review of the new air pollution sensing methods to determine IAQ and discusses how real-time sensing could bring a paradigm shift in controlling the concentration of key air pollutants in billions of urban houses worldwide. However, we also show that besides the opportunities, challenges still remain in terms of maturing technologies, or data mining and their interpretation. Moreover, we discuss further research and essential development needed to close gaps between what is available today and needed tomorrow. In particular, we demonstrate that awareness of IAQ risks and availability of appropriate regulation are lagging behind the technologies.
68 citations
TL;DR: This article summarizes the existing studies on the state-of-the-art of LCS for AQM, and conceptualizes a step by step procedure to establish a sustainable AQM setup with LCS that can produce reliable data.
Abstract: Low-cost sensors (LCS) are becoming popular for air quality monitoring (AQM). They promise high spatial and temporal resolutions at low-cost. In addition, citizen science applications such as personal exposure monitoring can be implemented effortlessly. However, the reliability of the data is questionable due to various error sources involved in the LCS measurement. Furthermore, sensor performance drift over time is another issue. Hence, the adoption of LCS by regulatory agencies is still evolving. Several studies have been conducted to improve the performance of low-cost sensors. This article summarizes the existing studies on the state-of-the-art of LCS for AQM. We conceptualize a step by step procedure to establish a sustainable AQM setup with LCS that can produce reliable data. The selection of sensors, calibration and evaluation, hardware setup, evaluation metrics and inferences, and end user-specific applications are various stages in the LCS-based AQM setup we propose. We present a critical analysis at every step of the AQM setup to obtain reliable data from the low-cost measurement. Finally, we conclude this study with future scope to improve the availability of air quality data.
33 citations
01 Jan 2014
TL;DR: In this paper, the authors reviewed some fundamental drivers of UFP emissions and dispersion, and highlighted unresolved challenges, as well as recommendations to ensure sustainable urban development whilst minimising any possible adverse health impacts.
Abstract: Ultrafine particles (UFP; diameter less than 100 nm) are ubiquitous in urban air, and an acknowledged risk to human health. Globally, the major source for urban outdoor UFP concentrations is motor traffic. Ongoing trends towards urbanisation and expansion of road traffic are anticipated to further increase population exposure to UFPs. Numerous experimental studies have characterised UFPs in individual cities, but an integrated evaluation of emissions and population exposure is still lacking. Our analysis suggest that average exposure to outdoor UFPs in Asian cities is about four-times larger than those in European cities but impacts on human health are largely unknown. This article reviews some fundamental drivers of UFP emissions and dispersion, and highlights unresolved challenges, as well as recommendations to ensure sustainable urban development whilst minimising any possible adverse health impacts.
32 citations
01 Jun 2016
TL;DR: In this paper, a taxi fleet of over 15,000 vehicles was analyzed with the aim of predicting air pollution emissions for Singapore, and the results showed that highly localized areas of elevated emissions levels were identified, with a spatio-temporal precision not possible with previously used methods for estimating emissions.
Abstract: Air pollution related to traffic emissions pose an especially significant problem in cities; this is due to its adverse impact on human health and well-being. Previous studies which have aimed to quantify emissions from the transportation sector have been limited by either simulated or coarsely resolved traffic volume data. Emissions inventories form the basis of urban pollution models, therefore in this study, Global Positioning System (GPS) trajectory data from a taxi fleet of over 15,000 vehicles were analyzed with the aim of predicting air pollution emissions for Singapore. This novel approach enabled the quantification of instantaneous drive cycle parameters in high spatio-temporal resolution, which provided the basis for a microscopic emissions model. Carbon dioxide (CO2), nitrogen oxides (NOx), volatile organic compounds (VOCs) and particulate matter (PM) emissions were thus estimated. Highly localized areas of elevated emissions levels were identified, with a spatio-temporal precision not possible with previously used methods for estimating emissions. Relatively higher emissions areas were mainly concentrated in a few districts that were the Singapore Downtown Core area, to the north of the central urban region and to the east of it. Daily emissions quantified for the total motor vehicle population of Singapore were found to be comparable to another emissions dataset. Results demonstrated that high-resolution spatio-temporal vehicle traces detected using GPS in large taxi fleets could be used to infer highly localized areas of elevated acceleration and air pollution emissions in cities, and may become a complement to traditional emission estimates, especially in emerging cities and countries where reliable fine-grained urban air quality data is not easily available. This is the first study of its kind to investigate measured microscopic vehicle movement in tandem with microscopic emissions modeling for a substantial study domain.
21 citations
References
More filters
TL;DR: This paper addresses the development and implementation of a modular mobile node of a Wireless Sensor Network (WSN), designed to be mounted onboard vehicles, and capable of using different sensors according to mission needs.
Abstract: Robots, or in general, intelligent vehicles, require large amounts of data to adapt their behavior to the environment and achieve their goals. When their missions take place in large areas, using additional information to that gathered by the onboard sensors frequently offers a more efficient solution of the problem. The emergence of Cyber-Physical Systems and Cloud computing allows this approach, but integration of sensory information, and its effective availability for the robots or vehicles is challenging. This paper addresses the development and implementation of a modular mobile node of a Wireless Sensor Network (WSN), designed to be mounted onboard vehicles, and capable of using different sensors according to mission needs. The mobile node is integrated with an existing static network, transforming it into a Hybrid Wireless Sensor Network (H-WSN), and adding flexibility and range to it. The integration is achieved without the need for multi-hop routing. A database holds the data acquired by both mobile and static nodes, allowing access in real-time to the gathered information. A Human⁻Machine Interface (HMI) presents this information to users. Finally, the system is tested in real urban scenarios in a use-case of measurement of gas levels.
7 citations
01 Jan 2018
TL;DR: A system that deploys a number of low-cost sensors through a wireless Internet of Things (IoT) backbone and is thus capable of collecting high-granular data and demonstrating how to collect, integrate, analyze, and visualize real-time air quality data.
Abstract: Cities worldwide aim to reduce their greenhouse gas emissions and improve air quality for their citizens. Therefore, there is a need to implement smart city approaches to monitor, model, and understand local emissions to better guide these actions. We present our approach that deploys a number of low-cost sensors through a wireless Internet of Things (IoT) backbone and is thus capable of collecting high-granular data. Based on a flexible architecture, we built an ecosystem of data management and data analytics including processing, integration, analysis, and visualization as well as decision-support systems for cities to better understand their emissions. Our prototype system has so far been tested in two Scandinavian cities. We present this system and demonstrate how to collect, integrate, analyze, and visualize real-time air quality data.
7 citations
01 Jan 2013
TL;DR: In this paper, the main techniques for measuring the concentration of gases and particulate matter (PM) in the atmosphere using low-cost portable devices are described, and the main challenges related to these sensors and future applications are discussed.
Abstract: Air pollution has serious negative impacts for human health, climate, and the environment. We are entering a new age of air pollution measurement, with recent technological advances meaning traditional fixed air monitoring stations are being supplemented by portable low-cost sensors. These sensors have multiple purposes including to enhance monitoring networks, to undertake personal exposure monitoring and for source compliance monitoring. Consequently, making air quality measurements is now not restricted only to scientists and researchers, but these instruments also play an important role in citizen science applications. This article describes the main techniques for measuring the concentration of gases and particulate matter (PM) in the atmosphere using low-cost portable devices. The article concludes with a discussion of the main challenges related to these sensors and future applications.
7 citations
DOI•
05 Nov 2021TL;DR: In this paper, the potential use of four tree species (Eucalyptus camaldulensis, Casaurina equisetifolia, Conocarpus lancifolius, Ficus benjamina) growing in the green belt of 21 cement factories in Egypt to mitigate air pollution through assessing their air pollution tolerance index (APTI) and anticipated performance index (API), compared with two reference sites.
Abstract: Air pollution due to industrial emissions is one of the environmental problems in the world. It has negative effects on the environment and the health of living organisms. Tree species can improve the air quality and aesthetic value of the landscape. They are affected by different air pollutants and show varying levels of tolerance and sensitivity when growing as green belts around cement factories. The present study aimed at evaluating the potential use of four tree species (Eucalyptus camaldulensis, Casaurina equisetifolia, Conocarpus lancifolius, Ficus benjamina) growing in the green belt of 21 cement factories in Egypt to mitigate air pollution through assessing their air pollution tolerance index (APTI) and anticipated performance index (API), compared with two reference sites. Fresh fully expanded leaves were collected from the selected species at the same time for laboratory measurements of leaf relative water content (RWC), ascorbic acid (AA), total chlorophyll (TCH), and leaf extract pH to calculate the APTI and API. The results showed that E. camaldulensis was anticipated as an excellent performer, C. equisetifolia and C. lancifolius as very good performers, while F. benjamina was anticipated as a good performer. The values of API for the target species indicated their tolerance to cement pollution. It is recommended that the target species be planted extensively in the green belts of cement factories and other urban industrial areas to mitigate cement air pollution.
7 citations
TL;DR: This study proposes a methodology that will enable policymakers to develop an environmental health surveillance system that evaluates the distribution of air pollution exposure for a population within a target area and establish countermeasures based on advanced exposure assessment.
Abstract: Human exposure to air pollution is a major public health concern. Environmental policymakers have been implementing various strategies to reduce exposure, including the 10th-day-no-driving system. To assess exposure of an entire population of a community in a highly polluted area, pollutant concentrations in microenvironments and population time–activity patterns are required. To date, population exposure to air pollutants has been assessed using air monitoring data from fixed atmospheric monitoring stations, atmospheric dispersion modeling, or spatial interpolation techniques for pollutant concentrations. This is coupled with census data, administrative registers, and data on the patterns of the time-based activities at the individual scale. Recent technologies such as sensors, the Internet of Things (IoT), communications technology, and artificial intelligence enable the accurate evaluation of air pollution exposure for a population in an environmental health context. In this study, the latest trends in published papers on the assessment of population exposure to air pollution were reviewed. Subsequently, this study proposes a methodology that will enable policymakers to develop an environmental health surveillance system that evaluates the distribution of air pollution exposure for a population within a target area and establish countermeasures based on advanced exposure assessment.
7 citations