scispace - formally typeset
Search or ask a question

The rise of low-cost sensing for managing air pollution in cities

TL;DR: In this article, the authors illustrate the drivers behind current rises in the use of low-cost sensors for air pollution management in cities, whilst addressing the major challenges for their effective implementation.
Abstract: Ever growing populations in cities are associated with a major increase in road vehicles and air pollution. The overall high levels of urban air pollution have been shown to be of a significant risk to city dwellers. However, the impacts of very high but temporally and spatially restricted pollution, and thus exposure, are still poorly understood. Conventional approaches to air quality monitoring are based on networks of static and sparse measurement stations. However, these are prohibitively expensive to capture tempo-spatial heterogeneity and identify pollution hotspots, which is required for the development of robust real-time strategies for exposure control. Current progress in developing low-cost micro-scale sensing technology is radically changing the conventional approach to allow real-time information in a capillary form. But the question remains whether there is value in the less accurate data they generate. This article illustrates the drivers behind current rises in the use of low-cost sensors for air pollution management in cities, whilst addressing the major challenges for their effective implementation.
Citations
More filters
01 Jul 2018
TL;DR: In this article, the authors conducted a comprehensive literature search including both the scientific and grey literature, and concluded that there is no clear answer to the question, due to a lack of: sensor/monitor manufacturers' quantitative specifications of performance, consensus regarding recommended end-use and associated minimal performance targets of these technologies, and the ability of the prospective users to formulate the requirements for their applications, or conditions of the intended use.
Abstract: Over the past decade, a range of sensor technologies became available on the market, enabling a revolutionary shift in air pollution monitoring and assessment. With their cost of up to three orders of magnitude lower than standard/reference instruments, many avenues for applications have opened up. In particular, broader participation in air quality discussion and utilisation of information on air pollution by communities has become possible. However, many questions have been also asked about the actual benefits of these technologies. To address this issue, we conducted a comprehensive literature search including both the scientific and grey literature. We focused upon two questions: (1) Are these technologies fit for the various purposes envisaged? and (2) How far have these technologies and their applications progressed to provide answers and solutions? Regarding the former, we concluded that there is no clear answer to the question, due to a lack of: sensor/monitor manufacturers' quantitative specifications of performance, consensus regarding recommended end-use and associated minimal performance targets of these technologies, and the ability of the prospective users to formulate the requirements for their applications, or conditions of the intended use. Numerous studies have assessed and reported sensor/monitor performance under a range of specific conditions, and in many cases the performance was concluded to be satisfactory. The specific use cases for sensors/monitors included outdoor in a stationary mode, outdoor in a mobile mode, indoor environments and personal monitoring. Under certain conditions of application, project goals, and monitoring environments, some sensors/monitors were fit for a specific purpose. Based on analysis of 17 large projects, which reached applied outcome stage, and typically conducted by consortia of organizations, we observed that a sizable fraction of them (~ 30%) were commercial and/or crowd-funded. This fact by itself signals a paradigm change in air quality monitoring, which previously had been primarily implemented by government organizations. An additional paradigm-shift indicator is the growing use of machine learning or other advanced data processing approaches to improve sensor/monitor agreement with reference monitors. There is still some way to go in enhancing application of the technologies for source apportionment, which is of particular necessity and urgency in developing countries. Also, there has been somewhat less progress in wide-scale monitoring of personal exposures. However, it can be argued that with a significant future expansion of monitoring networks, including indoor environments, there may be less need for wearable or portable sensors/monitors to assess personal exposure. Traditional personal monitoring would still be valuable where spatial variability of pollutants of interest is at a finer resolution than the monitoring network can resolve.

138 citations

Journal Article
TL;DR: Forouzanfar et al. as discussed by the authors provide a review of the new air pollution sensing methods to determine indoor air quality and discuss how real-time sensing could bring a paradigm shift in controlling the concentration of key air pollutants in billions of urban houses worldwide.
Abstract: Household air pollution is ranked the 9th largest Global Burden of Disease risk (Forouzanfar et al., The Lancet 2015). People, particularly urban dwellers, typically spend over 90% of their daily time indoors, where levels of air pollution often surpass those of outdoor environments. Indoor air quality (IAQ) standards and approaches for assessment and control of indoor air require measurements of pollutant concentrations and thermal comfort using conventional instruments. However, the outcomes of such measurements are usually averages over long integrated time periods, which become available after the exposure has already occurred. Moreover, conventional monitoring is generally incapable of addressing temporal and spatial heterogeneity of indoor air pollution, or providing information on peak exposures that occur when specific indoor sources are in operation. This article provides a review of the new air pollution sensing methods to determine IAQ and discusses how real-time sensing could bring a paradigm shift in controlling the concentration of key air pollutants in billions of urban houses worldwide. However, we also show that besides the opportunities, challenges still remain in terms of maturing technologies, or data mining and their interpretation. Moreover, we discuss further research and essential development needed to close gaps between what is available today and needed tomorrow. In particular, we demonstrate that awareness of IAQ risks and availability of appropriate regulation are lagging behind the technologies.

68 citations

Journal ArticleDOI
01 Jan 2022-Sensors
TL;DR: This article summarizes the existing studies on the state-of-the-art of LCS for AQM, and conceptualizes a step by step procedure to establish a sustainable AQM setup with LCS that can produce reliable data.
Abstract: Low-cost sensors (LCS) are becoming popular for air quality monitoring (AQM). They promise high spatial and temporal resolutions at low-cost. In addition, citizen science applications such as personal exposure monitoring can be implemented effortlessly. However, the reliability of the data is questionable due to various error sources involved in the LCS measurement. Furthermore, sensor performance drift over time is another issue. Hence, the adoption of LCS by regulatory agencies is still evolving. Several studies have been conducted to improve the performance of low-cost sensors. This article summarizes the existing studies on the state-of-the-art of LCS for AQM. We conceptualize a step by step procedure to establish a sustainable AQM setup with LCS that can produce reliable data. The selection of sensors, calibration and evaluation, hardware setup, evaluation metrics and inferences, and end user-specific applications are various stages in the LCS-based AQM setup we propose. We present a critical analysis at every step of the AQM setup to obtain reliable data from the low-cost measurement. Finally, we conclude this study with future scope to improve the availability of air quality data.

33 citations

01 Jan 2014
TL;DR: In this paper, the authors reviewed some fundamental drivers of UFP emissions and dispersion, and highlighted unresolved challenges, as well as recommendations to ensure sustainable urban development whilst minimising any possible adverse health impacts.
Abstract: Ultrafine particles (UFP; diameter less than 100 nm) are ubiquitous in urban air, and an acknowledged risk to human health. Globally, the major source for urban outdoor UFP concentrations is motor traffic. Ongoing trends towards urbanisation and expansion of road traffic are anticipated to further increase population exposure to UFPs. Numerous experimental studies have characterised UFPs in individual cities, but an integrated evaluation of emissions and population exposure is still lacking. Our analysis suggest that average exposure to outdoor UFPs in Asian cities is about four-times larger than those in European cities but impacts on human health are largely unknown. This article reviews some fundamental drivers of UFP emissions and dispersion, and highlights unresolved challenges, as well as recommendations to ensure sustainable urban development whilst minimising any possible adverse health impacts.

32 citations

01 Jun 2016
TL;DR: In this paper, a taxi fleet of over 15,000 vehicles was analyzed with the aim of predicting air pollution emissions for Singapore, and the results showed that highly localized areas of elevated emissions levels were identified, with a spatio-temporal precision not possible with previously used methods for estimating emissions.
Abstract: Air pollution related to traffic emissions pose an especially significant problem in cities; this is due to its adverse impact on human health and well-being. Previous studies which have aimed to quantify emissions from the transportation sector have been limited by either simulated or coarsely resolved traffic volume data. Emissions inventories form the basis of urban pollution models, therefore in this study, Global Positioning System (GPS) trajectory data from a taxi fleet of over 15,000 vehicles were analyzed with the aim of predicting air pollution emissions for Singapore. This novel approach enabled the quantification of instantaneous drive cycle parameters in high spatio-temporal resolution, which provided the basis for a microscopic emissions model. Carbon dioxide (CO2), nitrogen oxides (NOx), volatile organic compounds (VOCs) and particulate matter (PM) emissions were thus estimated. Highly localized areas of elevated emissions levels were identified, with a spatio-temporal precision not possible with previously used methods for estimating emissions. Relatively higher emissions areas were mainly concentrated in a few districts that were the Singapore Downtown Core area, to the north of the central urban region and to the east of it. Daily emissions quantified for the total motor vehicle population of Singapore were found to be comparable to another emissions dataset. Results demonstrated that high-resolution spatio-temporal vehicle traces detected using GPS in large taxi fleets could be used to infer highly localized areas of elevated acceleration and air pollution emissions in cities, and may become a complement to traditional emission estimates, especially in emerging cities and countries where reliable fine-grained urban air quality data is not easily available. This is the first study of its kind to investigate measured microscopic vehicle movement in tandem with microscopic emissions modeling for a substantial study domain.

21 citations

References
More filters
Journal ArticleDOI
04 Nov 2016-Sensors
TL;DR: An Arrival and Departure Time Predictor (ADTP) for scheduling communication in opportunistic Internet of Things (IoT) is presented and opens opportunities for transmission planners and schedulers optimizing not only neighbour discovery, but the entire communication process.
Abstract: In this article, an Arrival and Departure Time Predictor (ADTP) for scheduling communication in opportunistic Internet of Things (IoT) is presented. The proposed algorithm learns about temporal patterns of encounters between IoT devices and predicts future arrival and departure times, therefore future contact durations. By relying on such predictions, a neighbour discovery scheduler is proposed, capable of jointly optimizing discovery latency and power consumption in order to maximize communication time when contacts are expected with high probability and, at the same time, saving power when contacts are expected with low probability. A comprehensive performance evaluation with different sets of synthetic and real world traces shows that ADTP performs favourably with respect to previous state of the art. This prediction framework opens opportunities for transmission planners and schedulers optimizing not only neighbour discovery, but the entire communication process.

6 citations

Journal ArticleDOI
25 Aug 2017
TL;DR: In this article, the long-term performance of low-cost instruments in environmental networks using a semiconducting oxide sensor measuring ground-level ozone (O3) was examined, and automated methodologies based on knowledge of sensor and environment characteristics were successfully applied to confirm sensor stability.
Abstract: This poster examines long-term performance of low-cost instruments in environmental networks using a semiconducting oxide sensor measuring ground-level ozone (O3). Sensors were placed outside in networks and automated methodologies based on knowledge of sensor and environment characteristics were successfully applied to confirm sensor stability. These networks demonstrated how environmental data could be collected and confirmed using networks of low-cost sensors, which supplemented observations from the existing regulatory network. This work is a critical step in the development of networks of low-cost environmental sensors when considering the delivery of reliable data.

6 citations

Proceedings ArticleDOI
Guodong Li1, Rui Ma1, Liu Xinyu1, Yue Wang1, Lin Zhang1 
10 Sep 2020
TL;DR: The proposed Robust Calibration approach using Historical data (RCH) can improve the accuracy and consistency of low-cost air quality sensors without the help of real-time and nearby reference data.
Abstract: Air pollution has become one of the major threats to human health. Conventional approaches for air pollution monitoring use precise professional devices, but cannot achieve dense deployment due to high cost. Therefore, systems consisting of low-cost sensors are applied as a supplement to obtain fine-grained pollution information. In order to maintain the accuracy of these low-cost sensors, it is essential to calibrate them to minimize the impact from sensor drifts. Existing field calibration methods utilize the real-time data from spatially-adjacent official air quality stations as reference. However, the real-time reference is not always accessible under existing station deployment. In this paper, we propose the Robust Calibration approach using Historical data (RCH) for low-cost air quality sensors. Our method corrects the sensor drift by adapting sensitivity and offset based on pollutant's concentration distribution. Experiments on NO2 data from real-world deployment in Foshan, China show that RCH has the similar performance compared with existing field calibration methods using real-time and spatially-adjacent references. It demonstrates that RCH can improve the accuracy and consistency of low-cost air quality sensors without the help of real-time and nearby reference data.

6 citations

01 Jan 2018
TL;DR: Ahangar et al. as discussed by the authors developed a semi-empirical dispersion model to estimate the impact of a solid barrier upwind of a highway on concentrations downwind of the road.
Abstract: Author(s): Enayati Ahangar, Faraz | Advisor(s): Venkatram, Akula | Abstract: Dispersion models play an essential role in understanding the impact of pollutant emissions on air quality. Once their results have been evaluated with observations, they are used by regulatory agencies and planning bodies to permit new sources and develop policies to mitigate the impact of emissions on air quality. In my research, I developed and applied a class of dispersion models referred to as semi-empirical models whose formulation depends on representing some of the governing processes with parameters whose values are obtained by fitting model estimates to corresponding observations. In recent years, roadway design is suggested as a potential strategy to mitigate the impact of vehicular emissions on near-road air quality. In my research, I developed a dispersion model to estimate the impact of a solid noise barrier upwind of a highway on concentrations downwind of the road. The results showed that an upwind barrier reduces the downwind concentration by enhancing turbulence and shifting the emissions upwind through the action of the recirculating zone formed behind the upwind barrier. I also propose a tentative model to estimate on-road concentrations within the recirculation zone.. The applicability of the downwind barrier dispersion models to real-world measurements was also explored in my research. First, a field study was conducted to measure ultra-fine particles (UFP) concentration and micrometeorology data near a roadside barrier in Riverside, California. Two models for downwind barriers were evaluated with data collected and emission factors were estimated for the fleet. The primary effect of a downwind barrier was equivalent to shifting the line sources on the road upwind by a distance of about HU(H/2)/u*.Next, UFP concentrations were measured downwind of a solid barrier and a solid barrier with vegetation simultaneously to estimate the incremental effect of tall vegetation on the mitigation caused by a solid barrier. The vegetation above the solid barrier reduced turbulence levels of the air passing through it and added to the concentration reduction induced by the solid barrier most of the time; however, this was not the case for all of the observed data. I then apply dispersion models at regional scales by interpreting PM_2.5 concentrations measured by a network of 40 low-cost monitors located in the Imperial Valley of southern California. This valley is bordered by deserts on the east and the west, the Salton Sea on the North, and Mexico to the South. Particulate matter can be transport into the valley from across these borders, and be generated from within the valley itself because of agricultural activity. These borders are represented by line sources and the valley by an area source. I estimate the emissions from these sources by fitting model estimates to daily and annually averaged measurements made at 40 monitors. Once these emissions are determined, I use them as inputs in the dispersion model to construct PM2.5 maps at a much finer resolution than that provided by the monitors.

6 citations