Transparent conducting oxide semiconductors for transparent electrodes
TL;DR: The present status and prospects for further development of polycrystalline or amorphous transparent conducting oxide (TCO) semiconductors used for practical thin-film transparent electrode applications are presented in this paper.
Abstract: The present status and prospects for further development of polycrystalline or amorphous transparent conducting oxide (TCO) semiconductors used for practical thin-film transparent electrode applications are presented in this paper. The important TCO semiconductors are impurity-doped ZnO, In2O3 and SnO2 as well as multicomponent oxides consisting of combinations of ZnO, In2O3 and SnO2, including some ternary compounds existing in their systems. Development of these and other TCO semiconductors is important because the expanding need for transparent electrodes for optoelectronic device applications is jeopardizing the availability of indium-tin-oxide (ITO), whose main constituent, indium, is a very expensive and scarce material. Al- and Ga-doped ZnO (AZO and GZO) semiconductors are promising as alternatives to ITO for thin-film transparent electrode applications. In particular, AZO thin films, with a low resistivity of the order of 10−5 Ω cm and source materials that are inexpensive and non-toxic, are the best candidates. However, further development of the deposition techniques, such as magnetron sputtering or vacuum arc plasma evaporation, as well as of the targets is required to enable the preparation of AZO and GZO films on large area substrates with a high deposition rate.
Citations
More filters
TL;DR: Graphene has high mobility and optical transparency, in addition to flexibility, robustness and environmental stability as discussed by the authors, and its true potential lies in photonics and optoelectronics, where the combination of its unique optical and electronic properties can be fully exploited, even in the absence of a bandgap, and the linear dispersion of the Dirac electrons enables ultrawideband tunability.
Abstract: The richness of optical and electronic properties of graphene attracts enormous interest. Graphene has high mobility and optical transparency, in addition to flexibility, robustness and environmental stability. So far, the main focus has been on fundamental physics and electronic devices. However, we believe its true potential lies in photonics and optoelectronics, where the combination of its unique optical and electronic properties can be fully exploited, even in the absence of a bandgap, and the linear dispersion of the Dirac electrons enables ultrawideband tunability. The rise of graphene in photonics and optoelectronics is shown by several recent results, ranging from solar cells and light-emitting devices to touch screens, photodetectors and ultrafast lasers. Here we review the state-of-the-art in this emerging field.
6,863 citations
University of Cambridge1, Istituto Italiano di Tecnologia2, Lancaster University3, University of Manchester4, Catalan Institution for Research and Advanced Studies5, Technical University of Denmark6, Nokia7, University of Trento8, fondazione bruno kessler9, Queen Mary University of London10, Technische Universität München11, Polytechnic University of Milan12, Centre national de la recherche scientifique13, University of Trieste14, University of Ioannina15, University of Geneva16, Trinity College, Dublin17, Texas Instruments18, University of Paris19, Spanish National Research Council20, Leiden University21, Delft University of Technology22, University of Patras23, École Normale Supérieure24, Radboud University Nijmegen25, Nest Labs26, Airbus UK27, Seoul National University28, Yonsei University29, University of Oxford30, Chalmers University of Technology31, University of Groningen32, STMicroelectronics33, Chemnitz University of Technology34, Max Planck Society35, Aalto University36
TL;DR: An overview of the key aspects of graphene and related materials, ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries are provided.
Abstract: We present the science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems, targeting an evolution in technology, that might lead to impacts and benefits reaching into most areas of society. This roadmap was developed within the framework of the European Graphene Flagship and outlines the main targets and research areas as best understood at the start of this ambitious project. We provide an overview of the key aspects of graphene and related materials (GRMs), ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries. We also define an extensive list of acronyms in an effort to standardize the nomenclature in this emerging field.
2,560 citations
TL;DR: This review explores different material classes for plasmonic and metamaterial applications, such as conventional semiconductors, transparent conducting oxides, perovskiteOxides, metal nitrides, silicides, germanides, and 2D materials such as graphene.
Abstract: Materials research plays a vital role in transforming breakthrough scientific ideas into next-generation technology. Similar to the way silicon revolutionized the microelectronics industry, the proper materials can greatly impact the field of plasmonics and metamaterials. Currently, research in plasmonics and metamaterials lacks good material building blocks in order to realize useful devices. Such devices suffer from many drawbacks arising from the undesirable properties of their material building blocks, especially metals. There are many materials, other than conventional metallic components such as gold and silver, that exhibit metallic properties and provide advantages in device performance, design flexibility, fabrication, integration, and tunability. This review explores different material classes for plasmonic and metamaterial applications, such as conventional semiconductors, transparent conducting oxides, perovskite oxides, metal nitrides, silicides, germanides, and 2D materials such as graphene. This review provides a summary of the recent developments in the search for better plasmonic materials and an outlook of further research directions.
1,836 citations
TL;DR: In this article, the authors compared carbon nanotube, metal nanowire networks, and regular metal grids with the usual transparent conductive oxides for optically transparent electrode applications.
Abstract: Increasing demand for raw materials means that alternatives to indium-tin oxide are desired for optically transparent electrode applications. Carbon nanotube, metal nanowire networks and regular metal grids have been investigated as possible options. In this review, these materials and recently rediscovered graphene are compared with the usual transparent conductive oxides.
1,697 citations
TL;DR: Transparent conductors (TCs) have a multitude of applications for solar energy utilization and for energy savings, especially in buildings as discussed by the authors, which leads naturally to considerations of spectral selectivity, angular selectivity, and temporal variability of TCs, as covered in three subsequent sections.
1,471 citations
References
More filters
TL;DR: In this paper, the authors present a comprehensive and up-to-date description of the deposition techniques, electro-optical properties, solid state physics of the electron transport and optical effects and some applications of these transparent conductors.
2,553 citations
TL;DR: In this paper, the authors describe a strategy for identifying oxide materials that should combine p-type conductivity with good optical transparency, and illustrate the potential of this approach by reporting the properties of thin films of CuAlO2, a transparent oxide having room-temperature p- type conductivity up to 1'S'cm−1.
Abstract: Optically transparent oxides tend to be electrical insulators, by virtue of their large electronic bandgap (⩾3.1 eV). The most notable exceptions are doped versions of the oxides In2O3, SnO2 and ZnO—all n-type (electron) conductors—which are widely used as the transparent electrodes in flat-panel displays1,2. On the other hand, no transparent oxide exhibiting high p-type (hole) conductivity is known to exist, whereas such materials could open the way to a range of novel applications. For example, a combination of the two types of transparent conductor in the form of a pn junction could lead to a ‘functional’ window that transmits visible light yet generates electricity in response to the absorption of ultraviolet photons. Here we describe a strategy for identifying oxide materials that should combine p-type conductivity with good optical transparency. We illustrate the potential of this approach by reporting the properties of thin films of CuAlO2, a transparent oxide having room-temperature p-type conductivity up to 1 S cm−1. Although the conductivity of our candidate material is significantly lower than that observed for the best n-type conducting oxides, it is sufficient for some applications, and demonstrates that the development of transparent p-type conductors is not an insurmountable goal.
1,871 citations
TL;DR: In this article, the physical properties of these materials are reviewed and compared, and a comparison of their properties can be found in Section 5.2.1] and Section 6.1.
Abstract: Transparent, electrically conductive films have been prepared from a wide variety of materials. These include semiconducting oxides of tin, indium, zinc, and cadmium, and metals such as silver, gold, and titanium nitride. In this article, the physical properties of these materials are reviewed and compared.
1,441 citations
TL;DR: In this article, a transparent conducting oxide (TCO) thin film composed of binary compounds such as SnO2 and In2O3 was developed by means of chemical-and physical-deposition methods.
Abstract: Most research to develop highly transparent and conductive thin films has focused on n-type semiconductors consisting of metal oxides. Historically, transparent conducting oxide (TCO) thin films composed of binary compounds such as SnO2 and In2O3 were developed by means of chemical- and physical-deposition methods. Impurity-doped SnO2 (Sb- or F-doped SnO2, e.g., SnO2:Sb or SnO2: F) and In2O3: Sn (indium tin oxide, ITO) films are in practical use. In addition to binary compounds, ternary compounds such as Cd2SnO4, CdSnO3, and CdIn2O4 were developed prior to 1980, but their TCO films have not yet been used widely.
954 citations
Book•
01 Jan 1995
TL;DR: In this paper, a comprehensive account of the properties, growth and applications of semiconducting transparent thin films is provided, which is a valuable reference tool for the established researcher, and provides a comprehensive introcution to the subject for graduates of electrical and electronic engineering.
Abstract: A comprehensive account of the properties, growth and applications of semiconducting transparent thin films, this book provides a single source reference for researchers in the field. It discusses the underlying physics of such films, and their commercial applications in such areas as gas sensors and temperature control coatings in the aerospace industry. It is clearly written, with sections on the different materials, different growth techniques, electrical properties, optical properties, and selected applications, for coatings, sensors, detectors and display devices.It is a valuable reference tool for the established researcher, and provides a comprehensive introcution to the subject for graduates of electrical and electronic engineering.The international team of authors, under the leadership of one of the world's authorities on the subject have written a book which has become the standard work in the field.
859 citations