Tree-Inspired Design for High-Efficiency Water Extraction.
TL;DR: The tree-inspired design offers an inexpensive and scalable solar energy harvesting and steam generation technology that can provide clean water globally, especially for rural or remote areas where water is not only scarce but also limited by water extraction materials and methods.
Abstract: The solar steam process, akin to the natural water cycle, is considered to be an attractive approach to address water scarcity issues globally. However, water extraction from groundwater, for example, has not been demonstrated using these existing technologies. Additionally, there are major unaddressed challenges in extracting potable water from seawater including salt accumulation and long-term evaporation stability, which warrant further investigation. Herein, a high-performance solar steam device composed entirely of natural wood is reported. The pristine, natural wood is cut along the transverse direction and the top surface is carbonized to create a unique bilayer structure. This tree-inspired design offers distinct advantages for water extraction, including rapid water transport and evaporation in the mesoporous wood, high light absorption (≈99%) within the surface carbonized open wood channels, a low thermal conductivity to avoid thermal loss, and cost effectiveness. The device also exhibits long-term stability in seawater without salt accumulation as well as high performance for underground water extraction. The tree-inspired design offers an inexpensive and scalable solar energy harvesting and steam generation technology that can provide clean water globally, especially for rural or remote areas where water is not only scarce but also limited by water extraction materials and methods.
Citations
More filters
TL;DR: Tao et al. as discussed by the authors discuss the development of the key components for achieving high-performance evaporation, including solar absorbers and structures, thermal insulators and thermal concentrators.
Abstract: As a ubiquitous solar-thermal energy conversion process, solar-driven evaporation has attracted tremendous research attention owing to its high conversion efficiency of solar energy and transformative industrial potential. In recent years, solar-driven interfacial evaporation by localization of solar-thermal energy conversion to the air/liquid interface has been proposed as a promising alternative to conventional bulk heating-based evaporation, potentially reducing thermal losses and improving energy conversion efficiency. In this Review, we discuss the development of the key components for achieving high-performance evaporation, including solar absorbers, evaporation structures, thermal insulators and thermal concentrators, and discuss how they improve the performance of the solar-driven interfacial evaporation system. We describe the possibilities for applying this efficient solar-driven interfacial evaporation process for energy conversion applications. The exciting opportunities and challenges in both fundamental research and practical implementation of the solar-driven interfacial evaporation process are also discussed. The thermal properties of solar energy can be exploited for many applications, including evaporation. Tao et al. review recent developments in the field of solar-driven interfacial evaporation, which have enabled higher-performance structures by localizing energy conversion to the air/liquid interface.
1,139 citations
TL;DR: In this article, a review of recent developments in photothermal materials, with a focus on their photothermal conversion mechanisms as light absorbers, is presented, and the potential applications of this attractive technology in a variety of energy and environmental fields are described.
690 citations
TL;DR: In this article, the fundamental principles of materials design for efficient solar-to-thermal energy conversion and vapour generation are summarized for both fundamental research and practical water-purification applications.
Abstract: Solar-powered water evaporation — the extraction of vapour from liquid water using solar energy — provides the basis for the development of eco-friendly and cost-effective freshwater production. Liquid water consumes and carries energy, and, thus, plays an essential role in this process. As such, extensive experimental and theoretical studies have been focused on water management to achieve efficient solar vapour generation. Many innovative materials have been proposed to enable highly controllable and efficient solar-to-thermal energy conversion to address the challenges in the energy–water nexus from the microscale to the molecular level. In this Review, we summarize the fundamental principles of materials design for efficient solar-to-thermal energy conversion and vapour generation. We discuss how to integrate photothermal materials, nanostructures/microstructures and water–material interactions to improve the performance of the evaporation system via in situ utilization of solar energy. Focusing on materials science and engineering, we overview the key challenges and opportunities for nanostructured and microstructured materials in both fundamental research and practical water-purification applications. Materials engineering enables the control of water–material interactions in solar vapour generators, which aim to efficiently utilize solar energy for the cost-effective production of clean water. This Review discusses material-design principles for solar evaporators, spanning from macrostructures to molecular configurations.
615 citations
TL;DR: In this article, the authors provide a materials and structural perspective on how wood can be redesigned via structural engineering, chemical and/or thermal modification to alter its mechanical, fluidic, ionic, optical and thermal properties.
Abstract: The complex structure of wood, one of the most abundant biomaterials on Earth, has been optimized over 270 million years of tree evolution. This optimization has led to the highly efficient water and nutrient transport, mechanical stability and durability of wood. The unique material structure and pronounced anisotropy of wood endows it with an array of remarkable properties, yielding opportunities for the design of functional materials. In this Review, we provide a materials and structural perspective on how wood can be redesigned via structural engineering, chemical and/or thermal modification to alter its mechanical, fluidic, ionic, optical and thermal properties. These modifications enable a diverse range of applications, including the development of high-performance structural materials, energy storage and conversion, environmental remediation, nanoionics, nanofluidics, and light and thermal management. We also highlight advanced characterization and computational-simulation approaches for understanding the structure–property–function relationships of natural and modified wood, as well as informing bio-inspired synthetic designs. In addition, we provide our perspective on the future directions of wood research and the challenges and opportunities for industrialization. The porous hierarchical structure and anisotropy of wood make it a strong candidate for the design of materials with various functions, including load bearing, multiscale mass transport, and optical and thermal management. In this Review, the composition, structure, characterization methods, modification strategies, properties and applications of natural and modified wood are discussed.
479 citations
TL;DR: It is demonstrated that enhancing the hydrability of the h-LAH could change the water state and partially activate the water, hence facilitating water evaporation, and raises the solar vapor generation to a record rate of ~3.6 kg m−2 hour−1 under 1 sun.
Abstract: Water purification by solar distillation is a promising technology to produce fresh water. However, solar vapor generation, is energy intensive, leading to a low water yield under natural sunlight. Therefore, developing new materials that can reduce the energy requirement of water vaporization and speed up solar water purification is highly desirable. Here, we introduce a highly hydratable light-absorbing hydrogel (h-LAH) consisting of polyvinyl alcohol and chitosan as the hydratable skeleton and polypyrrole as the light absorber, which can use less energy ( −2 hour −1 under 1 sun. The h-LAH-based solar still also exhibits long-term durability and antifouling functionality toward complex ionic contaminants.
475 citations
References
More filters
TL;DR: In this article, a plasmon-enhanced solar desalination device, fabricated by the self-assembly of aluminium nanoparticles into a three-dimensional porous membrane, is demonstrated.
Abstract: Self-assembling aluminium nanoparticles are used to make a plasmon-enhanced device for desalination. Plasmonics has generated tremendous excitement because of its unique capability to focus light into subwavelength volumes1, beneficial for various applications such as light harvesting2,3, photodetection4, sensing5, catalysis6 and so on. Here we demonstrate a plasmon-enhanced solar desalination device, fabricated by the self–assembly of aluminium nanoparticles into a three-dimensional porous membrane. The formed porous plasmonic absorber can float naturally on water surface, efficiently absorb a broad solar spectrum (>96%) and focus the absorbed energy at the surface of the water to enable efficient (∼90%) and effective desalination (a decrease of four orders of magnitude). The durability of the devices has also been examined, indicating a stable performance over 25 cycles under various illumination conditions. The combination of the significant desalination effect, the abundance and low cost of the materials, and the scalable production processes suggest that this type of plasmon-enhanced solar desalination device could provide a portable desalination solution.
1,567 citations
TL;DR: Development of an approach and corresponding material structure for solar steam generation while maintaining low optical concentration and keeping the bulk liquid at low temperature with no vacuum, which provides a novel approach to harvesting solar energy for a broad range of phase-change applications.
Abstract: Currently, steam generation using solar energy is based on heating bulk liquid to high temperatures. This approach requires either costly high optical concentrations leading to heat loss by the hot bulk liquid and heated surfaces or vacuum. New solar receiver concepts such as porous volumetric receivers or nanofluids have been proposed to decrease these losses. Here we report development of an approach and corresponding material structure for solar steam generation while maintaining low optical concentration and keeping the bulk liquid at low temperature with no vacuum. We achieve solar thermal efficiency up to 85% at only 10 kW m(-2). This high performance results from four structure characteristics: absorbing in the solar spectrum, thermally insulating, hydrophilic and interconnected pores. The structure concentrates thermal energy and fluid flow where needed for phase change and minimizes dissipated energy. This new structure provides a novel approach to harvesting solar energy for a broad range of phase-change applications.
1,495 citations
TL;DR: It is shown that single-layer porous graphene can be used as a desalination membrane using an oxygen plasma etching process and exhibits a salt rejection rate of nearly 100% and rapid water transport.
Abstract: An oxygen plasma etching process can be used to create a nanoporous graphene layer that can efficiently desalinate water.
1,353 citations
TL;DR: Solar illumination of broadly absorbing metal or carbon nanoparticles dispersed in a liquid produces vapor without the requirement of heating the fluid volume, enabling important compact solar applications such as sterilization of waste and surgical instruments in resource-poor locations.
Abstract: Solar illumination of broadly absorbing metal or carbon nanoparticles dispersed in a liquid produces vapor without the requirement of heating the fluid volume. When particles are dispersed in water at ambient temperature, energy is directed primarily to vaporization of water into steam, with a much smaller fraction resulting in heating of the fluid. Sunlight-illuminated particles can also drive H2O–ethanol distillation, yielding fractions significantly richer in ethanol content than simple thermal distillation. These phenomena can also enable important compact solar applications such as sterilization of waste and surgical instruments in resource-poor locations.
1,082 citations
TL;DR: The goal of this study is to review the fundamental structures and chemistries of wood and wood-derived materials, which are essential for a wide range of existing and new enabling technologies.
Abstract: With the arising of global climate change and resource shortage, in recent years, increased attention has been paid to environmentally friendly materials. Trees are sustainable and renewable materials, which give us shelter and oxygen and remove carbon dioxide from the atmosphere. Trees are a primary resource that human society depends upon every day, for example, homes, heating, furniture, and aircraft. Wood from trees gives us paper, cardboard, and medical supplies, thus impacting our homes, school, work, and play. All of the above-mentioned applications have been well developed over the past thousands of years. However, trees and wood have much more to offer us as advanced materials, impacting emerging high-tech fields, such as bioengineering, flexible electronics, and clean energy. Wood naturally has a hierarchical structure, composed of well-oriented microfibers and tracheids for water, ion, and oxygen transportation during metabolism. At higher magnification, the walls of fiber cells have an interes...
1,031 citations