Journal ArticleDOI
Tribological properties of cobalt-partially stabilized zirconia (PSZ) composites in dry sliding conditions
E.P. Rajiv,A. Iyer,S.K. Seshadri +2 more
Reads0
Chats0
TLDR
Particulate strengthened cobalt-partially stabilized zirconia composites were produced by conventional electro-codeposition method as mentioned in this paper and evaluated against a hardened steel disc under dry sliding conditions on a thrust bearing type disc on disc machine.About:
This article is published in Wear.The article was published on 1995-10-01. It has received 15 citations till now. The article focuses on the topics: Cubic zirconia.read more
Citations
More filters
Journal ArticleDOI
Electrodeposition and sliding wear resistance of nickel composite coatings containing micron and submicron SiC particles
TL;DR: In this article, Ni-SiC composite coatings containing 4−5 vol.% submicron SiC particles were evaluated in uni-and bi-directional sliding tests against corundum balls.
Journal ArticleDOI
Electrodeposition and characterization of Ni–Zn–P and Ni–Zn–P/nano-SiC coatings
TL;DR: In this article, a novel electroplating bath was introduced, and Ni-Zn, NiZn-P/nano-SiC nickel rich composite coating was successfully deposited on low carbon steel substrates.
Journal ArticleDOI
Effect of hydrodynamic conditions of electrodeposition process on microstructure and functional properties of Ni-W/ZrO2 nanocomposites
TL;DR: In this paper, the effect of rotating rate of the steel RDE on the chemical composition and homogeneity of embedded zirconia nanoparticles in the Ni-W alloy matrix was investigated.
Journal ArticleDOI
Pulse Electrocodeposited Ni–WC Composite Coating
TL;DR: In this article, tungsten carbide (WC) particulate of average size 10µm were electrocodeposited in the nickel metal matrix, to form metal matrix composite (MMC) coating over the EN8 steel substrate.
Journal ArticleDOI
The Effects of Al2O3 Amount on the Microstructure and Properties of Fe-Cr Matrix Composites
TL;DR: In this article, the optimum amount of reinforcement was determined by evaluating the microstructure, relative density, total porosity, micro Vickers hardness, and wear resistance of the composites.
References
More filters
Book
Friction and Wear of Materials
Ernest Rabinowicz,R. I. Tanner +1 more
TL;DR: Abrasive and other types of wear include: adhesives, lubrication, friction, and adhesion, as well as material properties that influence surface interaction as discussed by the authors.
Journal ArticleDOI
The temperature of rubbing surfaces
TL;DR: In this article, a simple formulation of flash temperature theory is given, which reduces the mathematical complexities and instead emphasises the relevant physical considerations, and the use of the theory is illustrated by some new experimental results on the breakdown of Perspex and the wear of steels.
Journal ArticleDOI
Overview no. 55 Wear-Mechanism maps
S.C. Lim,Michael F. Ashby +1 more
TL;DR: The potential of wear-Mechanism diagrams is explored in this paper, where the rate and the regime of dominance of dry wear mechanisms are investigated empirically and by modelling by theoretical analysis calibrated to experiment.
Journal ArticleDOI
Wear and abrasion of cast Al-Alumina particle composites
TL;DR: In this article, the adhesive wear rate of cast aluminium and Al-Si alloys containing up to 5 wt.% γ-Al 2 O 3 particles (100 μm size) was determined under conditions of adhesive wear and abrasive wear against a hardened steel disc and an alumina abrasive cloth sheet respectively.