Tunable Photoluminescence Across the Entire Visible Spectrum from Carbon Dots Excited by White Light
TL;DR: This work reports for the first time the synthesis and photoluminescence properties of carbon dots whose peak fluorescence emission wavelengths are tunable across the entire visible spectrum by simple adjustment of the reagents and synthesis conditions, and these carbon dots are excited by white light.
Abstract: Although reports have shown shifts in carbon dot emission wavelengths resulting from varying the excitation wavelength, this excitation-dependent emission does not constitute true tuning, as the shifted peaks have much weaker intensity than their dominant emission, and this is often undesired in real world applications. We report for the first time the synthesis and photoluminescence properties of carbon dots whose peak fluorescence emission wavelengths are tunable across the entire visible spectrum by simple adjustment of the reagents and synthesis conditions, and these carbon dots are excited by white light. Detailed material characterization has revealed that this tunable emission results from changes in the carbon dots' chemical composition, dictated by dehydrogenation reactions occurring during carbonization. These significantly alter the nucleation and growth process, resulting in dots with either more oxygen-containing or nitrogen-containing groups that ultimately determine their photoluminescence properties, which is in stark contrast to previous observations of carbon dot excitation-dependent fluorescence. This new ability to synthesize broadband excitable carbon dots with tunable peak emissions opens up many new possibilities, particularly in multimodal sensing, in which multiple analytes and processes could be monitored simultaneously by associating a particular carbon dot emission wavelength to a specific chemical process without the need for tuning the excitation source.
Citations
More filters
TL;DR: Carbon dots with tunable photoluminescence (PL) and a quantum yield of up to 35% in water were hydrothermally synthesized in one pot and separated via silica column chromatography, and these separated CDs emitted bright and stable luminescence in gradient colors under a single-wavelength UV light.
Abstract: Carbon dots (CDs) with tunable photoluminescence (PL) and a quantum yield of up to 35% in water were hydrothermally synthesized in one pot and separated via silica column chromatography. These separated CDs emitted bright and stable luminescence in gradient colors from blue to red under a single-wavelength UV light. They exhibited high optical uniformity; that is, every sample showed only one peak in the PL excitation spectrum, only one peak in the excitation-independent PL emission spectrum, and similar monoexponential fluorescence lifetimes. Although these samples had similar distributions of particle size and graphite structure in their carbon cores, the surface state gradually varied among the samples, especially the degree of oxidation. Therefore, the observed red shift in their emission peaks from 440 to 625 nm was ascribed to a gradual reduction in their band gaps with the increasing incorporation of oxygen species into their surface structures. These energy bands were found to depend on the surfac...
1,707 citations
TL;DR: In this article, recent exciting progresses on CD and GQD-based optoelectronic and energy devices, such as light emitting diodes (LEDs), solar cells (SCs), photodetctors (PDs), photocatalysis, batteries, and supercapacitors are highlighted.
Abstract: As new members of carbon material family, carbon and graphene quantum dots (CDs, GQDs) have attracted tremendous attentions for their potentials for biological, optoelectronic, and energy related applications. Among these applications, bio-imaging has been intensively studied, but optoelectronic and energy devices are rapidly rising. In this Feature Article, recent exciting progresses on CD- and GQD-based optoelectronic and energy devices, such as light emitting diodes (LEDs), solar cells (SCs), photodetctors (PDs), photocatalysis, batteries, and supercapacitors are highlighted. The recent understanding on their microstructure and optical properties are briefly introduced in the first part. Some important progresses on optoelectronic and energy devices are then addressed as the main part of this Feature Article. Finally, a brief outlook is given, pointing out that CDs and GQDs could play more important roles in communication- and energy-functional devices in the near future.
1,023 citations
TL;DR: Carbon dots have received an increasing amount of attention because of their significant advantages in terms of low toxicity, chemical inertness, tunable fluorescence, good water solubility, and physicochemical properties as mentioned in this paper.
731 citations
TL;DR: This work demonstrates multicolored narrow bandwidth emission from triangular CQDs with a quantum yield up to 54–72% and synthesizes these dots showing tunable emission color, high fluorescence and a narrow FWHM of only 30 nanometers, which will set the stage for developing next-generation high-performance C QDs-based light-emitting diodes.
Abstract: Carbon quantum dots (CQDs) have emerged as promising materials for optoelectronic applications on account of carbon’s intrinsic merits of high stability, low cost, and environment-friendliness. However, the CQDs usually give broad emission with full width at half maximum exceeding 80 nm, which fundamentally limit their display applications. Here we demonstrate multicolored narrow bandwidth emission (full width at half maximum of 30 nm) from triangular CQDs with a quantum yield up to 54–72%. Detailed structural and optical characterizations together with theoretical calculations reveal that the molecular purity and crystalline perfection of the triangular CQDs are key to the high color-purity. Moreover, multicolored light-emitting diodes based on these CQDs display good stability, high color-purity, and high-performance with maximum luminance of 1882–4762 cd m−2 and current efficiency of 1.22–5.11 cd A−1. This work will set the stage for developing next-generation high-performance CQDs-based light-emitting diodes.
592 citations
TL;DR: In this paper, the authors reviewed the latest researches on the synthesis, structure, optical and electronic properties of CDs as well as their advanced applications in biomedicine and optoelectronics.
515 citations
References
More filters
TL;DR: It is reported that nanoscale carbon particles (carbon dots) upon simple surface passivation are strongly photoluminescent in both solution and the solid state.
Abstract: We report that nanoscale carbon particles (carbon dots) upon simple surface passivation are strongly photoluminescent in both solution and the solid state. The luminescence emission of the carbon dots is stable against photobleaching, and there is no blinking effect. These strongly emissive carbon dots may find applications similar to or beyond those of their widely pursued silicon counterparts.
3,817 citations
TL;DR: A facile and highoutput strategy for the fabrication of CDs, which is suitable for industrial-scale production and is almost equal to fluorescent dyes, is discussed.
Abstract: Fluorescent carbon-based materials have drawn increasing attention in recent years owing to exceptional advantages such as high optical absorptivity, chemical stability, biocompatibility, and low toxicity. These materials primarily include carbon dots (CDs), nanodiamonds, carbon nanotubes, fullerene, and fluorescent graphene. The superior properties of fluorescent carbon-based materials distinguish them from traditional fluorescent materials, and make them promising candidates for numerous exciting applications, such as bioimaging, medical diagnosis, catalysis, and photovoltaic devices. Among all of these materials, CDs have drawn the most extensive notice, owing to their early discovery and adjustable parameters. However, many scientific issues with CDs still await further investigation. Currently, a broad series of methods for obtaining CD-based materials have been developed, but efficient one-step strategies for the fabrication of CDs on a large scale are still a challenge in this field. Current synthetic methods are mainly deficient in accurate control of lateral dimensions and the resulting surface chemistry, as well as in obtaining fluorescent materials with high quantum yields (QY). Moreover, it is important to expand these kinds of materials to novel applications. Herein, a facile and highoutput strategy for the fabrication of CDs, which is suitable for industrial-scale production (yield is ca. 58%), is discussed. The QY was as high as ca. 80%, which is the highest value recorded for fluorescent carbon-based materials, and is almost equal to fluorescent dyes. The polymer-like CDs were converted into carbogenic CDs by a change from low to high synthesis temperature. The photoluminescence (PL) mechanism (high QY/PL quenching) was investigated in detail by ultrafast spectroscopy. The CDs were applied as printing ink on the macro/micro scale and nanocomposites were also prepared by polymerizing CDs with certain polymers. Additionally, the CDs could be utilized as a biosensor reagent for the detection of Fe in biosystems. The CDs were prepared by a hydrothermal method, which is described in the Supporting Information (Figure 1a; see also the Supporting Information, Figure S1). The reaction was conducted by first condensing citric acid and ethylenediamine, whereupon they formed polymer-like CDs, which were then carbonized to form the CDs. The morphology and structure of CDs were confirmed by analysis. Figure 1b shows transmission electron microscopy (TEM) images of the CDs, which can be seen to have a uniform dispersion without apparent aggregation and particle diameters of 2–6 nm. The sizes of CDs were also measured by atomic force microscopy (AFM; Figure S2), and the average height was 2.81 nm. From the high-resolution TEM, most particles are observed to be amorphous carbon particles without any lattices; rare particles possess well-resolved lattice fringes. With such a low carbon-lattice-structure content, no obvious D or G bands were detected in the Raman spectra of the CDs (Figure S3). The XRD patterns of the CDs (Figure 1c) also displayed a broad peak centered at 258 (0.34 nm), which is also attributed to highly disordered carbon atoms. Moreover, NMR spectroscopy (H and C) was employed to distinguish sp-hybridized carbon atoms from sp-hybridized carbon atoms (Figure S4). In the H NMR spectrum, sp carbons were detected. In the C NMR spectrum, signals in the range of 30–45 ppm, which correspond to aliphatic (sp) carbon atoms, and signals from 100–185 ppm, which are indicative of sp carbon atoms, were observed. Signals in the range of 170– 185 ppm, which correspond to carboxyl/amide groups, were also present. In the FTIR analysis of CDs, the following were observed: stretching vibrations of C OH at 3430 cm 1 and C H at 2923 cm 1 and 2850 cm , asymmetric stretching vibrations of C-NH-C at 1126 cm , bending vibrations of N H at 1570 cm , and the vibrational absorption band of C=O at 1635 cm 1 (Figure S5). Moreover, the surface groups were also investigated by XPS analysis (Figure 1d). C1s analysis revealed three different types of carbon atoms: graphitic or aliphatic (C=C and C C), oxygenated, and nitrous (Table S1). In the UV/Vis spectra, the peak was focused on 344 nm in an aqueous solution of CDs. In the fluorescence spectra, CDs have optimal excitation and emission wavelengths at 360 nm and 443 nm, and show a blue color under a hand-held UV lamp (Figure 2a). Excitation-dependent PL behavior was [*] S. Zhu, Q. Meng, Prof. J. Zhang, Y. Song, Prof. K. Zhang, Prof. B. Yang State Key Laboratory of Supramolecular Structure and Materials, College of Chemistry, Jilin University Changchun, 130012 (P. R. China) E-mail: byangchem@jlu.edu.cn
3,095 citations
TL;DR: It is reported that during the acid treatment and chemical exfoliation of traditional pitch-based carbon fibers, that are both cheap and commercially available, the stacked graphitic submicrometer domains of the fibers are easily broken down, leading to the creation of GQDs with different size distribution in scalable amounts.
Abstract: Graphene quantum dots (GQDs), which are edge-bound nanometer-size graphene pieces, have fascinating optical and electronic properties. These have been synthesized either by nanolithography or from starting materials such as graphene oxide (GO) by the chemical breakdown of their extended planar structure, both of which are multistep tedious processes. Here, we report that during the acid treatment and chemical exfoliation of traditional pitch-based carbon fibers, that are both cheap and commercially available, the stacked graphitic submicrometer domains of the fibers are easily broken down, leading to the creation of GQDs with different size distribution in scalable amounts. The as-produced GQDs, in the size range of 1–4 nm, show two-dimensional morphology, most of which present zigzag edge structure, and are 1–3 atomic layers thick. The photoluminescence of the GQDs can be tailored through varying the size of the GQDs by changing process parameters. Due to the luminescence stability, nanosecond lifetime, ...
1,980 citations
TL;DR: The two-photon luminescence microscopy imaging of human breast cancer cells with internalized carbon dots with pulsed laser excitation in the near-infrared is demonstrated.
Abstract: Carbon nanoparticles upon simple surface passivation exhibit bright photoluminescence. Reported here is a new finding that these carbon dots are also strongly two-photon luminescent with pulsed laser excitation in the near-infrared. The experimentally measured two-photon absorption cross-sections are comparable to those of the high-performance semiconductor quantum dots already available in the literature. The two-photon luminescence microscopy imaging of human breast cancer cells with internalized carbon dots is demonstrated.
1,902 citations
TL;DR: A simple electrochemical approach to luminescent and electrocatalytically active nitrogen-doped GQDs (N-GQDs) with oxygen-rich functional groups is reported, which allows them to be used for biomedical imaging and other optoelectronic applications.
Abstract: Graphene quantum dots (GQDs) represent a new class of quantum dots with unique properties. Doping GQDs with heteroatoms provides an attractive means of effectively tuning their intrinsic properties and exploiting new phenomena for advanced device applications. Herein we report a simple electrochemical approach to luminescent and electrocatalytically active nitrogen-doped GQDs (N-GQDs) with oxygen-rich functional groups. Unlike their N-free counterparts, the newly produced N-GQDs with a N/C atomic ratio of ca. 4.3% emit blue luminescence and possess an electrocatalytic activity comparable to that of a commercially available Pt/C catalyst for the oxygen reduction reaction (ORR) in an alkaline medium. In addition to their use as metal-free ORR catalysts in fuel cells, the superior luminescence characteristic of N-GQDs allows them to be used for biomedical imaging and other optoelectronic applications.
1,796 citations