Two types of luminescence blinking revealed by spectroelectrochemistry of single quantum dots
TL;DR: In this article, the role of charging in photoluminescence quenching was investigated in colloidal nanocrystals, and two distinct types of blinking are possible: conventional (A-type) blinking due to charging and discharging of the nanocrystal core, and a second sort (B-type), in which large changes in the emission intensity are not accompanied by significant changes in emission dynamics.
Abstract: Photoluminescence blinking—random switching between states of high (ON) and low (OFF) emissivities—is a universal property of molecular emitters found in dyes1, polymers2, biological molecules3 and artificial nanostructures such as nanocrystal quantum dots, carbon nanotubes and nanowires4, 5, 6. For the past 15 years, colloidal nanocrystals have been used as a model system to study this phenomenon5, 6. The occurrence of OFF periods in nanocrystal emission has been commonly attributed to the presence of an additional charge7, which leads to photoluminescence quenching by non-radiative recombination (the Auger mechanism)8. However, this ‘charging’ model was recently challenged in several reports9, 10. Here we report time-resolved photoluminescence studies of individual nanocrystal quantum dots performed while electrochemically controlling the degree of their charging, with the goal of clarifying the role of charging in blinking. We find that two distinct types of blinking are possible: conventional (A-type) blinking due to charging and discharging of the nanocrystal core, in which lower photoluminescence intensities correlate with shorter photoluminescence lifetimes; and a second sort (B-type), in which large changes in the emission intensity are not accompanied by significant changes in emission dynamics. We attribute B-type blinking to charge fluctuations in the electron-accepting surface sites. When unoccupied, these sites intercept ‘hot’ electrons before they relax into emitting core states. Both blinking mechanisms can be electrochemically controlled and completely suppressed by application of an appropriate potential.
Citations
More filters
TL;DR: The density of midgap trap states in CQD solids is quantified and shown to be limited by electron-hole recombination due to these states, and a robust hybrid passivation scheme is developed that can passivate trap sites that are inaccessible to much larger organic ligands.
Abstract: Improved performance in a photovoltaic device made of colloidal quantum dots is achieved through a combination of passivation by halide anions and organic crosslinking.
1,183 citations
TL;DR: The article reviews the current understanding of the physical mechanisms that determine the (opto)electronic properties of high-performance organic materials and highlights the capabilities of various experimental techniques for characterization, summarizes top-of-the-line device performance, and outlines recent trends in the further development of the field.
Abstract: Organic (opto)electronic materials have received considerable attention due to their applications in thin-film-transistors, light-emitting diodes, solar cells, sensors, photorefractive devices, and many others. The technological promises include low cost of these materials and the possibility of their room-temperature deposition from solution on large-area and/or flexible substrates. The article reviews the current understanding of the physical mechanisms that determine the (opto)electronic properties of high-performance organic materials. The focus of the review is on photoinduced processes and on electronic properties important for optoelectronic applications relying on charge carrier photogeneration. Additionally, it highlights the capabilities of various experimental techniques for characterization of these materials, summarizes top-of-the-line device performance, and outlines recent trends in the further development of the field. The properties of materials based both on small molecules and on conjug...
995 citations
TL;DR: Recent advances in nanocrystal research related to applications of QD materials in lasing, light-emitting diodes (LEDs), and solar energy conversion are examined.
Abstract: The field of nanocrystal quantum dots (QDs) is already more than 30 years old, and yet continuing interest in these structures is driven by both the fascinating physics emerging from strong quantum confinement of electronic excitations, as well as a large number of prospective applications that could benefit from the tunable properties and amenability toward solution-based processing of these materials. The focus of this review is on recent advances in nanocrystal research related to applications of QD materials in lasing, light-emitting diodes (LEDs), and solar energy conversion. A specific underlying theme is innovative concepts for tuning the properties of QDs beyond what is possible via traditional size manipulation, particularly through heterostructuring. Examples of such advanced control of nanocrystal functionalities include the following: interface engineering for suppressing Auger recombination in the context of QD LEDs and lasers; Stokes-shift engineering for applications in large-area luminesce...
703 citations
TL;DR: In this article, it was shown that the lowest exciton in caesium lead halide perovskites (CsPbX_3, with X = Cl, Br or I) involves a highly emissive triplet state.
Abstract: Nanostructured semiconductors emit light from electronic states known as excitons. For organic materials, Hund’s rules state that the lowest-energy exciton is a poorly emitting triplet state. For inorganic semiconductors, similar rules predict an analogue of this triplet state known as the ‘dark exciton’. Because dark excitons release photons slowly, hindering emission from inorganic nanostructures, materials that disobey these rules have been sought. However, despite considerable experimental and theoretical efforts, no inorganic semiconductors have been identified in which the lowest exciton is bright. Here we show that the lowest exciton in caesium lead halide perovskites (CsPbX_3, with X = Cl, Br or I) involves a highly emissive triplet state. We first use an effective-mass model and group theory to demonstrate the possibility of such a state existing, which can occur when the strong spin–orbit coupling in the conduction band of a perovskite is combined with the Rashba effect. We then apply our model to CsPbX_3 nanocrystals, and measure size- and composition-dependent fluorescence at the single-nanocrystal level. The bright triplet character of the lowest exciton explains the anomalous photon-emission rates of these materials, which emit about 20 and 1,000 times faster than any other semiconductor nanocrystal at room and cryogenic temperatures, respectively. The existence of this bright triplet exciton is further confirmed by analysis of the fine structure in low-temperature fluorescence spectra. For semiconductor nanocrystals, which are already used in lighting, lasers and displays, these excitons could lead to materials with brighter emission. More generally, our results provide criteria for identifying other semiconductors that exhibit bright excitons, with potential implications for optoelectronic devices.
661 citations
TL;DR: This work finds that because of significant charging of quantum dots with extra electrons, Auger recombination greatly impacts both LED efficiency and the onset of efficiency roll-off at high currents, and demonstrates two specific approaches using heterostructured quantum dots.
Abstract: Development of light-emitting diodes (LEDs) based on colloidal quantum dots is driven by attractive properties of these fluorophores such as spectrally narrow, tunable emission and facile processibility via solution-based methods. A current obstacle towards improved LED performance is an incomplete understanding of the roles of extrinsic factors, such as non-radiative recombination at surface defects, versus intrinsic processes, such as multicarrier Auger recombination or electron-hole separation due to applied electric field. Here we address this problem with studies that correlate the excited state dynamics of structurally engineered quantum dots with their emissive performance within LEDs. We find that because of significant charging of quantum dots with extra electrons, Auger recombination greatly impacts both LED efficiency and the onset of efficiency roll-off at high currents. Further, we demonstrate two specific approaches for mitigating this problem using heterostructured quantum dots, either by suppressing Auger decay through the introduction of an intermediate alloyed layer, or by using an additional shell that impedes electron transfer into the quantum dot to help balance electron and hole injection.
572 citations
References
More filters
TL;DR: In this article, the extinction coefficient per mole of nanocrystals at the first exitonic absorption peak, e.g., for high-quality CdTe, CdSe, and CdS, was found to be strongly dependent on the size of the nanocrystal, between a square and a cubic dependence.
Abstract: The extinction coefficient per mole of nanocrystals at the first exitonic absorption peak, e, for high-quality CdTe, CdSe, and CdS nanocrystals was found to be strongly dependent on the size of the nanocrystals, between a square and a cubic dependence. The measurements were carried out using either nanocrystals purified with monitored purification procedures or nanocrystals prepared through controlled etching methods. The nature of the surface ligands, the refractive index of the solvents, the PL quantum yield of the nanocrystals, the methods used for the synthesis of the nanocrystals, and the temperature for the measurements all did not show detectable influence on the extinction coefficient for a given sized nanocrystal within experimental error.
4,802 citations
4,395 citations
TL;DR: In this article, it was shown that light emission from single fluorescing nanocrystals of cadmium selenide under continuous excitation turns on and off intermittently with a characteristic timescale of about 0.5 seconds.
Abstract: SEMICONDUCTOR nanocrystals offer the opportunity to study the evolution of bulk materials properties as the size of a system increases from the molecular scale1,2. In addition, their strongly size-dependent optical properties render them attractive candidates as tunable light absorbers and emitters in optoelectronic devices such as light-emitting diodes3,4 and quantum-dot lasers5,6, and as optical probes of biological systems7. Here we show that light emission from single fluorescing nanocrystals of cadmium selenide under continuous excitation turns on and off intermittently with a characteristic timescale of about 0.5 seconds. This intermittency is not apparent from ensemble measurements on many nanocrystals. The dependence on excitation intensity and the change in on/off times when a passivating, high-bandgap shell of zinc sulphide encapsulates the nanocrystal8,9 suggests that the abrupt turning off of luminescence is caused by photo-ionization of the nanocrystal. Thus spectroscopic measurements on single nanocrystals can reveal hitherto unknown aspects of their photophysics.
1,757 citations
TL;DR: The SILAR technique reported here can also be used for the growth of complex colloidal semiconductor nanostructures, such as quantum shells and colloidal quantum wells.
Abstract: Successive ion layer adsorption and reaction (SILAR) originally developed for the deposition of thin films on solid substrates from solution baths is introduced as a technique for the growth of high-quality core/shell nanocrystals of compound semiconductors. The growth of the shell was designed to grow one monolayer at a time by alternating injections of air-stable and inexpensive cationic and anionic precursors into the reaction mixture with core nanocrystals. The principles of SILAR were demonstrated by the CdSe/CdS core/shell model system using its shell-thickness-dependent optical spectra as the probes with CdO and elemental S as the precursors. For this reaction system, a relatively high temperature, about 220−240 °C, was found to be essential for SILAR to fully occur. The synthesis can be readily performed on a multigram scale. The size distribution of the core/shell nanocrystals was maintained even after five monolayers of CdS shell (equivalent to about 10 times volume increase for a 3.5 nm CdSe na...
1,502 citations
TL;DR: This work shows that the "giant" NQDs (g-NQDs) are functionally distinct from standard core-only, core/shell and even core/multishell NQds, and are substantially less sensitive to changes in surface chemistry.
Abstract: Semiconductor nanocrystal quantum dots (NQDs) comprise an important class of inorganic fluorophores for applications from optoelectronics to biology. Unfortunately, to date, NQD optical properties (e.g., their efficient and particle-size-tunable photoluminescence) have been susceptible to instabilities at the bulk and single-particle levels. Specifically, ensemble quantum yields (QYs) in emission are dependent upon NQD surface chemistry and chemical environment, while at the single-particle level, NQDs are characterized by significant fluorescence intermittency (blinking) that hinders applications as single-photon light sources for quantum informatics and biolabels for real-time monitoring of single biomolecules. Furthermore, while NQDs are significantly more photostable than their organic dye counterparts, traditional NQDs photobleach over periods of seconds to many minutes. Here, we demonstrate for the first time that by encapsulating the NQD core in a sufficiently thick inorganic shell, we are able to divorce NQD function from NQD surface chemistry and chemical environment. We show that our "giant" NQDs (g-NQDs) are functionally distinct from standard core-only, core/shell and even core/multishell NQDs. g-NQDs are substantially less sensitive to changes in surface chemistry. They do not photobleach under continuous laser excitation over periods of several hours repeated over several days, and they exhibit markedly different blinking behavior; >20% of the g-NQDs do not blink, while >40% have on-time fractions of >80%. All of these observations are in stark contrast with control samples comprising core-only and standard, thinner core/multishell NQDs.
887 citations